|
General Description
The MAX96717 GMSL™ serializer receives video on an
MIPI CSI-2 interface and outputs it on a GMSL2 serial link
transceiver. Simultaneously, it sends and receives bidirectional
control channel data across the same GMSL2 link.
GMSL2 data can be transported over Coaxial or Shielded-
Twisted Pair (STP) cables. It operates at a fixed rate of
3Gbps or 6Gbps in the forward direction, and 187.5Mbps
in the reverse direction. The device is programmed
through a local I2C/UART interface or across the link from
a matching deserializer. The MAX96717 includes two I2C/
UART pass-through channels, flexible GPIO, SPI tunnel,
a built-in ADC, temperature sensor, and an extensive set
of diagnostics for functional safety. Operation is specified
over the automotive temperature range of -40°C to
+105°C and the device is AEC-Q100 Grade 2 qualified.
Data can be transmitted over low-cost 50Ω Coax or 100Ω
STP cables that meet the GMSL2 channel specification.
Table 1 provides guidance to typical maximum lengths of
commonly used automotive cables. Contact the factory for
the GMSL2 channel specification.
Benefits and Features
● Automotive Grade High Speed Link
• -21.0dB at 3GHz (6Gbps) Max Insertion Loss
• -19.5dB at 1.5GHz (3Gbps) Max Insertion Loss
• Auto Adapt for Changes in Channel Conditions
• Operates at -40°C to +105°C Ambient
● Four-Lane MIPI CSI-2 v1.3 Input Port
• MIPI D-PHY v1.2 Receivers rated at 2.5Gbps per
Lane
• Supports any CSI-2 Data Type in Tunneling Mode
• Cyclic Redundancy Check (CRC), and Error
Correction Code (ECC)
• 16 Virtual Channels
• Polarity Flip and Data Lane Reassignment
● Full-Duplex Communication Over a Single Wire
● 3Gbps or 6Gbps Forward-Link Rates, and 187.5Mbps
Reverse-Link Rate
● ASIL-B Compliant
• End-to-End Data Integrity through CRC in
Tunneling Mode
• R-S Forward-Error Correction (FEC) for Protection
of Forward Video and Control-Channel Data
• CRC Protection of Side-Channel and Video Data
• Power-on Self Test
● Concurrent Side Channel for Device Configuration
and Communication with Peripherals
• I2C/UART, Pass-Through I2C/UART, SPI, GPIO,
and Register-Programmable GPIO
● Crystal-Free Operation Using Reference Over
Reverse (RoR) Clocking
● Reference Clock Output for Image Sensor
● Built-in ADC and Temperature Sensor
● Compact 5mm x 5mm TQFN Side-Wettable Package with 0.5mm Pitch
Applications
● Advanced Driver Assistance Systems (ADAS)
● 8Mp 40fps Forward-Vision Camera (FVC) Systems
● Surround View Systems (SVS)
● Driver Monitor Systems (DMS)
● Rear-View Camera (RVC)
● Systems with Multiple Synchronized Cameras
|