General Description
The RT8237L PWM controller provides high efficiency,
excellent transient response, and high DC output
accuracy needed for stepping down high voltage
batteries to generate low voltage CPU core, I/O, and
chipset RAM supplies in notebook computers.
The constant on-time PWM control scheme handles
wide input/output voltage ratios with ease and provides
100ns “instant-on” response to load transients while
maintaining a relatively constant switching frequency.
The RT8237L achieves high efficiency at a reduced cost
by eliminating the current sense resistor found in
traditional current mode PWMs. Efficiency is further
enhanced by its ability to drive very large synchronous
rectifier MOSFETs and to enter diode emulation mode
at light load condition. The Buck conversion allows this
device to directly step down high voltage batteries at the
highest possible efficiency. The pre-set frequency
selections minimize the effort required for new designs.
The RT8237L is intended for CPU core, chipset, DRAM,
or other low voltage supplies down to 0.7V. The
RT8237L is available in the VQFN-16L 3x3 package.

Features
⚫ Wide Input Voltage Range: 4.5V to 26V
⚫ Output Voltage Range: 0.7V to 3.3V
⚫ Built-in 0.5% 0.7V Reference Voltage
⚫ Quick Load-Step Response within 100ns
⚫ 4700ppm/C Current Source for Current Limit
RDS(ON)
⚫ Adjustable Current Limit with Low-side MOSFET
⚫ 4 Selectable Frequency Settings
⚫ Soft-Start Control
⚫ Drives Large Synchronous-Rectifier FETs
⚫ Integrated Boot Switch
⚫ Built-in OCP/UVP
⚫ Thermal Shutdown
⚫ Power Good Indicator

Applications
⚫ Notebook Computers
⚫ CPU Core Supply
⚫ Chipset/RAM Supply Down to 0.7V
⚫ Generic DC-DC Power Regulator
The recommended junction temperature range is −40C
to 125C and ambient temperature range is −40C to
85C.