DESCRIPTION
The DS2755 high-precision battery fuel gauge is a data-acquisition and information-storage device tailored for cost-sensitive and space-constrained 1-cell Li+/polymer battery-pack applications. The DS2755 provides the key hardware components required to accurately estimate remaining capacity by integrating low-power, precision measurements of temperature, voltage, current, and current accumulation, as well as nonvolatile (NV) data storage, into the small footprint of a 3.0mm x 4.4mm 8-pin TSSOP package.

FEATURES
■ Snapshot Mode Allows Instantaneous Power Measurement
■ Accurate Current Measurement for Coulomb Counting (Current Accumulation)
    - 2% ±4μV over ±64mV Input Range
    - 2% ±200μA over ±3.2A Range Using a 20mΩ Sense Resistor
■ Current Measurement
    - 9-Bit Bidirectional Snapshot Measurement
    - 12-Bit Bidirectional Average Updated Every 88ms
    - 15-Bit Bidirectional Average Updated Every 2.8s
■ Voltage Measurement
    - 9-Bit Snapshot Measurement
    - 10-Bit Measurement Updated Every 4ms
■ Temperature Measurement
    - 10-Bit Measurement, 0.125°C Resolution Using Integrated Sensor
■ Host Alerted When Accumulated Current or Temperature Exceeds User-Selectable Limits
■ 96 Bytes of Lockable EEPROM
■ 8 Bytes of General-Purpose SRAM
■ Dallas 1-Wire® Interface with Unique 64-Bit Device Address with Standard 16kbps or Overdrive 142kbps Timing
■ 3mm Dimension of 8-Pin TSSOP Package Allows Mounting on Side of Thin Prismatic Li+ and Li+/Polymer Cells

APPLICATIONS
    Cell Phones
    Digital Cameras
    Smartphones
    PDAs
    Portable Consumer Products