Features
• Higher ripple though use of low-ESR material consequently, the permissible ripple
current is improved by 27% in the windless status or 40% in the ventilated condition
(0.5m/s) as compared with conventional constructions (HU3 series).
• Improvement in air exhaust (flow hole phenomenon) from the terminal insertion hole at
solder fixing though improvement of cap condtruction.
• The operating spase of the safety vent (arranged on the case bottom) is reduced from
5mm (conventional necessary distance) into 1mm through improvement of case
construction. For these new case construction, pattern desigh can be move flexible.