Features
* Built-in re-timer
ㅡ Integrated re-timer for USB 3.2 up to Gen2 @ 10Gbps
— Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E)
— Supports both host (source) and device (sink) applications in USB-C subsystems
ㅡ Loss compensation to recover up to 23dB channel loss

* Integrated mux
- Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
— Mux control input through 12C commands from external 12C master (or, optionally through FLIP/USB_EN pins)
* Integrated Reference CLK
* Serial and debug interfaces
— I’C Slave interface, up to 1MHz, for mux and re-timer configuration
* Industry standard compatibility
ㅡ USB 3.2 specification, Appendix E
— USB Type-C r1.2 specification
— Intel USB 3.2 Repeater and Active Switch specification
* Low-power design
- Analog power supply at 1.8V
— I/O power supply at 1.8V
- Core power supply at 1.2V
* Package
- QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
* Commercial temperature range of 0C to 70C

Applications
Notebooks, desktops, workstations, servers, docking