1 Features
• Pin-to-pin low power replacement for industrystandard
six-channel digital isolators supporting
high energy efficiency application requirements
• Automatic enable of high speed channels to
support bi-directional wake up with ultra low
quiescent current in STANDBY state: 442μA
(maximum) current per side at VCC = 3.3V (85°C)
• 50Mbps data rate on high-speed data channels
• 4Mbps data rate on low-speed control channels
with automatic enable
• Low propagation delay: 13.75ns (maximum) at
3.3V
• Robust SiO2 isolation barrier:
– High lifetime at 750VRMS working voltage
– Wide temperature range: –40°C to 125°C
– Up to 5000VRMS isolation rating
– Up to 10.4kV surge capability
– ±50kV/μs typical CMTI
• Supply range: 2.5 to 5.5V
• 2.5 to 5.5V level translation
• Default output high ( ISO6163 ) and low
( ISO6163F ) options
• Robust electromagnetic compatibility (EMC)
– System-level ESD, EFT, and surge immunity
– Low emissions
• Wide-SOIC (DW-16) Package
• Safety-Related Certifications:
– DIN EN IEC 60747-17 (VDE 0884-17)
– UL 1577 component recognition program
– IEC 62368-1, IEC 61010-1, IEC 60601-1 and
GB 4943.1 certifications

2 Applications
• Appliances including high energy efficient products
• Electricity meter and Grid
• Power supplies
• Factory automation
• Building automation
• Lighting
• Motor drives

3 Description
The ISO6163 devices are high-performance, sixchannel
digital isolators designed for high energy
efficiency and cost-sensitive applications requiring up
to 5000VRMS isolation ratings per UL 1577. These
devices are also certified by VDE, TUV, CSA, and
CQC.
The ISO6163 devices are optimized with low
quiescent current and bi-directional automatic enable
of the high speed data channels for use in high
energy efficiency applications such as appliances,
battery monitoring, metering and grid.
These devices are designed with low power
consumption, high electromagnetic immunity and low
emissions while isolating CMOS or LVCMOS digital
I/O signals such as: GPIOs, SPI (ADC, DAC, other
peripherals), UART, RS-485, RS-232, and CAN .
Each channel has a logic input and output buffer
separated by TI's proprietary silicon dioxide (SiO2)
isolation barrier.
The ISO6163 device has three forward channels and
three reverse-direction channels. This device provides
two low speed data channels with bi-directional
automatic enable control functionality. The low speed
control channels automatically enable the high speed
channels when needed or turn them off (outputs
high impedance) to further reduce power consumption
when high speed data transfer is not needed by the
system. In the event of input power or signal loss, the
default output level is high for devices without suffix F
and low for devices with suffix F.