|
Features ■ CMOS DTS microcontroller LSI with built-in prescaler PLL and LCD driver ■ Operating voltage range: VDD = 0.9 to 1.8 V (typ.: 1.5 V) ■ Current dissipation: With CPU in operation: IDD = 150 µA (typ.) With PLL in operation: IDD = 1 mA (typ. At inputting OSCin = 30 MHz) ■ Operating temperature range: ■ Ta = −10 to 60°C ■ Program memory (ROM): ■ 16-bit × 8192 steps ■ Data memory (RAM): ■ 4-bit × 512 words ■ Oscillator frequency: Crystal oscillator: 75 kHz (crystal oscillator) High-speed oscillator: 300 to 600 kHz (ceramic oscillator or crystal oscillator) ■ Instruction execution time: Crystal oscillator: 40 µs High-speed oscillator: 5 to 10 µs ■ Interrupt: External: 2 system (INTR1, INTR2 pin) Internal: 4 system (serial-interface, timer-port, timer-counter, decreased voltage ■ detection) ■ Interrupt stack: 4 level × 26 bit G-register, Data select, Carry flag, Data register ■ Address stack: 16 level × 13 bit (program counter) ■ I/O port: CMOS I/O port: 36 (max) N-ch open-drain I/O port: 9 (max) Exclusive output port: 2 (max), exclusive input port: 1 (max) ■ LCD driver: 1/4 duty, 1/2 bias or 1/4 duty, 1/3 bias: 72 segments (max) ■ Serial Interface: 1 system, 2 channel (N-ch open-drain, CMOS I/O port), 3 kinds (3-wired, 2-wired, ■ UART) ■ Buzzer: 4 kinds of frequency (1 kHz, 1.56 kHz, 2.08 kHz, 3 kHz), 4 modes (continuous, single-shot, 10 Hz intermittent, 10 Hz intermittent 1 Hz interval) ■ Timer counter: 8 bit, 2 kinds of timer clock (25 kHz, 1 kHz), 2 modes (timer counter, pulse width measure (INTR1 pin)) ■ Pulse counter: ■ 8 bit up/down counter ■ Electronic volume: 2 channel, 32 step (0 dB to −78 dB, −∞dB) ■ A/D converter: 6 bit, 4 channel, conversion time: 240 µs ■ Amplifier for LPF: 5.5 V output max. (Tout, Tin) ■ DC/DC converter of VT: 2 stage (0.75 V, 1.0 V) voltage detected (VDET) 15 kinds of doubler clock, 2 types of doubler clock output (CMOS output: DDCK2, N-ch output: DDCK1) Weight: 0.32 g (typ.)
|