1FEATURES
23· Total Power Output (Bridge Tied Load)
– 2 ´ 100 W at 10% THD+N Into 4 Ω
– 2 ´ 80 W at 10% THD+N Into 6 Ω
– 2 ´ 65 W at 10% THD+N Into 8 Ω
· Total Power Output (Single Ended)
– 4 ´ 40 W at 10% THD+N Into 3 Ω
– 4 ´ 30 W at 10% THD+N Into 4 Ω
· Total Power Output (Parallel Mode)
– 1 ´ 200 W at 10% THD+N Into 2 Ω
– 1 ´ 160 W at 10% THD+N Into 3 Ω
· >110 dB SNR (A-Weighted With TAS5518
Modulator)
· <0.1% THD+N (1 W, 1 kHz)
· Supports PWM Frame Rates of 192 kHz to
432 kHz
· Resistor-Programmable Current Limit
· Integrated Self-Protection Circuitry, Including:
– Under Voltage Protection
– Overtemperature Warning and Error
– Overload Protection
– Short-Circuit Protection
– PWM Activity Detector
· Standalone Protection Recovery
· Power-On Reset (POR) to Eliminate System
Power-Supply Sequencing
· High-Efficiency Power Stage (>90%) With
110-mΩ Output MOSFETs
· Thermally Enhanced Package 44-Pin HTSSOP
(DDV)
· Error Reporting, 3.3-V and 5.0-V Compliant
· EMI Compliant When Used With
Recommended System Design

APPLICATIONS
· Mini/Micro Audio System
· DVD Receiver
· Home Theater

DESCRIPTION
The TAS5342L is a high-performance, integrated
stereo digital amplifier power stage designed to drive
a 4-Ω bridge-tied load (BTL) at up to 100 W per
channel with low harmonic distortion, low integrated
noise, and low idle current.
The TAS5342L has a complete protection system
integrated on-chip, safeguarding the device against a
wide range of fault conditions that could damage the
system. These protection features are short-circuit
protection, over-current protection, under voltage
protection, over temperature protection, and a loss of
PWM signal (PWM activity detector).
A power-on-reset (POR) circuit is used to eliminate
power-supply sequencing that is required for most
power-stage designs.