1.1 Features 1
• Intel VR13 Serial VID (SVID) Compliant
• Full VR13 Server Feature Set Including Digital
Input Power Monitor
• Programmable Loop Compensations
• Configurable with Non-Volatile Memory (NVM) for
Low External Component Counts
• Individual Phase Current Calibrations and Reports
• Dynamic Phase Shedding with Programmable
Current Threshold for Optimizing Efficiency at Light
and Heavy Loads
• Fast Phase-Adding for Undershoot Reduction
(USR)
• Backward VR12.0 and VR12.5 Compatible
• 8-Bit DAC with Selectable 5 mV or 10 mV
Resolution and Output Ranges from 0.25 V to
1.52 V or 0.5 to 2.8125 V for Dual Channels
• Driverless Configuration for Efficient High-
Frequency Switching
• Fully Compatible with TI NextFET™ Power Stage
for High-Density Solutions
• Accurate, Adjustable Voltage Positioning
• Patented AutoBalance™ Phase Balancing
• Selectable, 16-level Per-Phase Current Limit
• PMBus™ System Interface for Telemetry of
Voltage, Current, Power, Temperature, and Fault
Conditions
• Dynamic Output Voltage Transitions with
Programmable Slew Rates via SVID or PMBus
Interface
• Conversion Voltage Range: 4.5 V to 17 V
• Low Quiescent Current

1.2 Applications
• ASIC Needs Dual Power Rails
• High-Performance Processor Power

1.3 Description
The TPS53679 is a fully VR13 SVID compliant step-down controller with dual channels, built-in nonvolatile
memory (NVM), and PMBus™ interface, and is fully compatible with TI NexFET ™power stage.
Advanced control features such as D-CAP+™ architecture with undershoot reduction (USR) provide fast
transient response, low output capacitance, and good current sharing. The device also provides novel
phase interleaving strategy and dynamic phase shedding for efficiency improvement at different loads.
Adjustable control of VCORE slew rate and voltage positioning round out the Intel® VR13™ features. In
addition, the device supports the PMBus communication interface for reporting the telemetry of voltage,
current, power, temperature, and fault conditions to the systems. All programmable parameters can be
configured by the PMBus interface and can be stored in NVM as the new default values to minimize the
external component count.
The TPS53679 device if offered in a thermally enhanced -pin QFN packaged and is rated to operate from
–40°C to 125°C.