Features
• AEC-Q100 qualified
• General
– Single channel smart high-side driver with MultiSense analog feedback
– Very low standby current
– Compatible with 3 V and 5 V CMOS outputs
• MultiSense diagnostic functions
– Multiplexed analog feedback of: load current with high precision
proportional current mirror, VCC supply voltage and TCHIP device
temperature
– Overload and short to ground (power limitation) indication
– Thermal shutdown indication
– OFF-state open-load detection
– Output short to VCC detection
– Sense enable/disable
• Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Configurable latch-off on overtemperature or power limitation with
dedicated fault reset pin
– Loss of ground and loss of VCC
– Reverse battery with external components
– Electrostatic discharge protection