1 Features
1• Distributes One Differential Clock Input Pair
LVPECL to 10 Differential LVPECL
• Fully Compatible With LVECL and LVPECL
• Supports a Wide Supply Voltage Range from
2.375 V to 3.8 V
• Selectable Clock Input Through CLK_SEL
• Low-Output Skew (Typical 15 ps) for Clock-
Distribution Applications
– Additive Jitter Less Than 1 ps
– Propagation Delay Less Than 350 ps
– Open Input Default State single–
LVDS, CML, SSTL Input Compatible
• VBB Reference Voltage Output for Single-Ended
Clocking
• Available in a 32-Pin LQFP and QFN Package
• Frequency Range From DC to 3.5 GHz
• Pin-to-Pin Compatible With MC100 Series EP111,
ES6111, LVEP111, PTN1111

2 Applications
• Designed for Driving 50-Ω Transmission Lines
• High Performance Clock Distribution

3 Description
The CDCLVP111 clock driver distributes one
differential clock pair of LVPECL input, (CLK0, CLK1)
to ten pairs of differential LVPECL clock (Q0, Q9)
outputs with minimum skew for clock distribution. The
CDCLVP111 can accept two clock sources into an
input multiplexer. The CDCLVP111 is specifically
designed for driving 50-Ω transmission lines. When
an output pin is not used, leaving it open is
recommended to reduce power consumption. If only
one of the output pins from a differential pair is used,
the other output pin must be identically terminated to
50 Ω.
The VBB reference voltage output is used if single–
ended input operation is required. In this case, the VBB pin should be connected to CLK0 and bypassed
to GND through a 10-nF capacitor.
However, for high-speed performance up to 3.5 GHz, the differential mode is strongly recommended.
The CDCLVP111 device is characterized for operation from –40°C to 85°C.