|
Features
• LS1012A contains one 64-bit Arm® Cortex®-A53
core processor with the following capabilities:
– 256 kB L2 cache w/ECC
– Neon SIMD Co-processor
– Arm v8 Cryptography Extensions
– Single-threaded cores with 32 KB L1 data cache and
32 KB L1 instruction cache, and both Neon and
Precision Floating Point module support
• One 16-bit DDR3L SDRAM memory controller
– Up to 1.0 GT/s
– Supports 16-bit operation (no ECC support)
– Support for x8 and x16 devices
• Packet Forwarding Engine (PFE)
• Cryptography acceleration (SEC)
• Three SerDes lanes
– Two SerDes PLLs supported for usage by any
SerDes data lane
– Support for up to 6 Gbit/s operation
• Ethernet Interfaces supported by PFE
– Two quad-speed Ethernet MACs supporting 2.5G,
1G, 100M, 10M
– Support for RGMII, SGMII, 2.5G SGMII
– Energy efficient Ethernet support (802.3 az)
• High-speed peripheral interfaces
– One PCIe 2.0 controller, supporting x1 operation
– One Serial ATA (SATA 3.0) controller
– One USB 3.0/2.0 controller with integrated PHY
– One USB 2.0 controller with ULPI interface
• Additional peripheral interfaces
– One Quad Serial Peripheral Interface (QSPI)
controller for serial Flash
– One Serial Peripheral Interface (SPI) controller
– Two enhanced secure digital host controllers (SD,
SDIO, eMMC)
– Two I2C controllers
– One 16550 compliant DUART (two UART
interfaces)
– General Purpose IO (GPIO)
– Two Flextimers
– Five Synchronous Audio Interfaces (SAI)
• QorIQ Platform’s Trust Architecture
• Debug supporting run control, data acquisition, highspeed
trace, and performance/event monitoring
• Pre-boot loader (PBL) provides pre-boot initialization
and RCW loading capabilities
• Single-source clocking solution enabling generation of
core, platform, DDR, SerDes, and USB clocks from a
single external crystal and internal crystal oscillator
• 211 FC-LGA package, 9.6 mm x 9.6 mm
|