DESCRIPTION
The M66307SP/FP is an integrated circuit consisting of a line buffer with static memory, manufactured by the silicon gate CMOS process, which satisfies A3-paper 400DPI requirements. It converts the stored data from the 16-bit MPU bus into serial data and outputs it at a transfer rate of up to 10Mbps synchronously with the external data request clock or an arbitrary continuous clock.

FEATURES
• 16-bit MPU bus compatible
• Writing data via DMAC is possible
• 320-word (5,120-bit) static RAM
• Data output rate of up to 10Mbps
• Built-in function to add fixed data of a specified length at the beginning of output data (Fixed data: Continuous High bit or Low bit data)
• The output format can be selected between FIFO or LIFO.
• The output method can be selected from two:
   (1) Synchronized with an arbitrary continuous clock (φ IN) on the system side; the frequency of clock output (CLK/φ OUT) can be divided by 1, 2, 4, 8, or 16.
   (2) Synchronized with the data request clock (CLK IN) on the peripheral equipment side.
• Up to two devices can be cascaded.
   (1) Toggle configuration
   (2) 32-bit bus configuration
• High fan-out outputs (CLK/φ OUT, DATA OUT). Io=±24mA
   (±4mA for INTR and DREQ ±8mA for BUSY/ORDY)
• The clock input (CLK/φ IN) contains a Schmitt trigger.
• The reset (RESET), Write (WR) and toggle input (TOG) contain negative noise reduction circuits.

APPLICATION
   Image-handling general OA equipment