DEVICE OVERVIEW
This document contains device-specific information for the following devices:

   • PIC24FJ64GB106   • PIC24FJ192GB108
   • PIC24FJ128GB106 • PIC24FJ256GB108
   • PIC24FJ192GB106 • PIC24FJ64GB110
   • PIC24FJ256GB106 • PIC24FJ128GB110
   • PIC24FJ64GB108   • PIC24FJ192GB110
   • PIC24FJ128GB108 • PIC24FJ256GB110
  
This expands on the existing line of Microchip‘s 16-bit microcontrollers, combining an expanded peripheral feature set and enhanced computational performance with a new connectivity option: USB On-The-Go. The PIC24FJ256GB110 family provides a new platform for high-performance USB applications, which may need more than an 8-bit platform, but don’t require the power of a digital signal processor.

Power Management:
• On-Chip 2.5V Voltage Regulator
• Switch between Clock Sources in Real Time
• Idle, Sleep and Doze modes with Fast Wake-up and
   Two-Speed Start-up
• Run mode: 1 mA/MIPS, 2.0V Typical
• Sleep mode Current Down to 100 nA Typical
• Standby Current with 32 kHz Oscillator: 2.5 A,
   2.0V typical
  
Universal Serial Bus Features:
• USB v2.0 On-The-Go (OTG) Compliant
• Dual Role Capable – can act as either Host or Peripheral
• Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB
   Operation in Host mode
• Full-Speed USB Operation in Device mode
• High-Precision PLL for USB
• Internal Voltage Boost Assist for USB Bus Voltage
   Generation
• Interface for Off-Chip Charge Pump for USB Bus
   Voltage Generation
• Supports up to 32 Endpoints (16 bidirectional):
   - USB Module can use any RAM location on the
      device as USB endpoint buffers
• On-Chip USB Transceiver with On-Chip Voltage Regulator
• Interface for Off-Chip USB Transceiver
• Supports Control, Interrupt, Isochronous and Bulk Transfers
• On-Chip Pull-up and Pull-Down Resistors

High-Performance CPU:
• Modified Harvard Architecture
• Up to 16 MIPS Operation at 32 MHz
• 8 MHz Internal Oscillator
• 17-Bit x 17-Bit Single-Cycle Hardware Multiplier
• 32-Bit by 16-Bit Hardware Divider
• 16 x 16-Bit Working Register Array
• C Compiler Optimized Instruction Set Architecture with
   Flexible Addressing modes
• Linear Program Memory Addressing, Up to 12 Mbytes
• Linear Data Memory Addressing, Up to 64 Kbytes
• Two Address Generation Units for Separate Read and
   Write Addressing of Data Memory

Analog Features:
• 10-Bit, Up to 16-Channel Analog-to-Digital (A/D)
   Converter at 500 ksps:
   - Conversions available in Sleep mode
• Three Analog Comparators with Programmable Input/
   Output Configuration
• Charge Time Measurement Unit (CTMU) (Continue ...)