GENERAL DESCRIPTION
The AMS112 series consists of positive fixed voltage regulators featuring an internal electronic switch controlled by TTL or CMOS logic levels. When the Control pin is pulled to a logic high level, the device is in the ON state. If the control function is not used, the control terminal should be connected to a logic high level or VIN, therefore allowing the regulator to be ON. The regulator will be ON when the control terminal voltage is grater than 1.8V. To lower the output noise level to 30mVrms, an external capacitor can be connected to the noise bypass pin. These devices feature very low quiescent current of 1mA when supplying 30mA loads (180mA at no load). This unique characteristic and the low standby current (typ. 100nA) make the AMS112 ideal to use for standby power systems. Like other regulators the AMS112 series also includes internal current limiting and thermal shutdown.
The AMS112 is offered in 3.3V and 5.0V output voltages, and is available in the 5-pin SOT-23 surface mount package.

FEATURES
● 3.3V and 5V Voltage Available*
● Active High On/Off Control
● Output Current of 150mA
● Very Low Quiescent Current
● Low Dropout Voltage of 80mV at 30mA
● Very Low Noise
● Short Circuit Protection
● Internal Thermal Shutdown
● Space Saving 5 Lead SOT-23 Package

APPLICATIONS
● Battery Powered Systems
● Portable Consumer Equipment
● Cordless Telephones
● Portable (Notebook) Computers
● Portable Instrumentation
● Radio Control Systems
● Personal Communication Equipment
● Toys
● Low Voltage Systems