Intelligent Stepping Motor Driver

The TA8068F is a stepping motor driver with a current capacity of 1.5A. Inputs INA and INB are combined to control the four outputs.
Since the inputs are TTL-compatible, this IC can be controlled directly from a CPU or other control system.
The IC also incorporates various protective functions as well as a self-diagnostic function for diagnostic function for diagnostic output.

FEATURES
• Output current capacity : 1.5 A (max)
• Low standby current : 0.1 mA (max)
• Built−in Protective Functions : Over-Voltage Protection/ Short-Circuit Protection(latch) / Thermal-Shutdown
• Self−diagnostic Output : On Short-Circuit Detection
• Recommended operating supply voltage range : VCC = 8~16 V
• Separate GND for output and logic control sections
• HSOP20-Pin Power Flat Pakage