Description
The LED6001 device is a LED driver that combines a boost controller and a high-side current sensing circuitry optimized for driving one string of high-brightness LEDs. The device is compatible with multiple topologies such as boost, SEPIC and floating load buck-boost. The brightness of the LEDs can be controlled through PWM dimming and analog dimming (10:1 ratio) by means of two independent pins. Enhanced PWM dimming can be obtained thanks to a MOSFET in series with the LED string and directly driven by a dedicated pin.

Features
• Switching controller section
    – 5.5 V to 36 V input voltage range
    – Very low shutdown current: ISHDN < 10 µA
    – Internal +5 V LDO for gate driver supply
    – Internal +3.3 V LDO for device supply
    – Fixed frequency peak current mode control
    – Adjustable (100 kHz to 1 MHz) switching frequency
    – External synchronization for multi-device applications
    – High performance external MOSFET driver
    – Cycle-by-cycle external MOSFET OCP
    – Fixed internal soft-start
    – Programmable output OVP
    – Boost, buck-boost and SEPIC topologies supported
    – Thermal shutdown with autorestart
    – Output short-circuit detection
• LED control section
    – Up to 60 V output voltage
    – Constant current control loop
    – High-side output current sensing circuitry
    – 30 to 300 mV differential sensing voltage
    – ± 4% output current reference accuracy
    – Output overcurrent protection
    – Sensing resistor failure protection
    – PWM dimming with auxiliary series switch
    – Analog dimming

Applications
• Indoor and architectural LED lighting
• Emergency LED lighting
• Off-grid LED street lighting
• White goods
• Gaming/gambling machines