INTRODUCTION
The SMP9210, -11, -12 trio are serial input, voltage output, dual 10-Bit digital to analog converters. They can operate from a single 2.7V to 5.5V supply. Internal precision buffers swing rail-to-rail with an input reference range from ground to the positive supply.

FEATURES
● Two 10-Bit Nonvolatile DACs
    ♦ INL ±1LSB
    ♦ DNL ±1LSB
● Programmable Configuration
● Programmable Power On Reset Options
    ♦ Recall Full Scale Value
    ♦ Recall Zero Scale Value
    ♦ Recall Mid-Scale Value
    ♦ Recall NV Register Value
● Tandem or Independent Operation of DACs
● Programmable Power Down Mode (Short VOUT to GND or Float VOUT)
● I2C Interface
● Low Noise Outputs
● 2.7V to 5.5V Operation
● –40ºC to 85ºC Temperature Range

APPLICATIONS
● ATE Set and Forget Calibration
● Laser Biasing
● RFPA Biasing