10007290-R0046CULF Price, 판매업체, Stock

Ntc Thermistor; Product Range:Sl22 Series; Disc Size:22Mm; Resistance (25°C):10Ohm; Approvals:Ul; Maximum Energy Rating At 25°C:90J; Maximum Steady State Current At 25°C:7A; Dissipation Constant:32.4Mw/°C; No. Of Pins:2 Rohs Compliant: Yes
RoHS : Compliant

1 : $5.11
10 : $3.93
25 : $3.9
50 : $3.33
100 : $3.02
250 : $2.98
500 : $2.49
1,000 : $2.33

615

4411.0007

Schurter Electronic Components

T13 Circuit Breaker 15A/Carton Box; |Schurter 4411.0007
RoHS : Compliant

20 : $32.17
40 : $30.61

120

SS-73100-073

Stewart Connector

Connector, Rj45, Jack, 8P8C, 8Port, Th; |Stewart Connector SS-73100-073
RoHS : Compliant

1 : $15.65
50 : $14.2
100 : $13.01
250 : $12.08
500 : $11.29

09110007112

HARTING Technology Group

Han Tc100 M-Contact 16Mm² Protected Rohs Compliant: Yes |Harting 09110007112
RoHS : Compliant

1 : $22.52
5 : $20.83
10 : $19.13
25 : $18.1
50 : $17.07
100 : $15.94

691243310007

Wurth Elektronik

3.81 Mm Terminal Block, Horizontal Entry; |Würth Elektronik 691243310007
RoHS : Compliant

1 : $2.62
10 : $2.48
25 : $2.33
50 : $2.16
100 : $2.07
500 : $1.94

99 9475 100 07

Franz Binder GmbH & Co

Plug, Free, 7Way; |Binder 99 9475 100 07
RoHS : Compliant

1 : $18.69
15 : $17.24
50 : $16.26
100 : $15.47
250 : $14.91

X1G006221000711

Seiko Epson Corporation

Osc, 156.25Mhz, Hcsl, Smd, 2Mm X 1.6Mm; |Epson X1G006221000711
RoHS : Compliant

1 : $21.8
5 : $20.83
10 : $19.84
25 : $18.84
50 : $17.76
100 : $17.44
250 : $16.97

110007

Wera

Screwdriver, Slot, 125X5.5Mm; |Wera 110007 (Alternate Part Number: 4013288003331
RoHS : Not Compliant

1 : $13.27
5 : $13.0

AX100079

Belden Inc

Splice Organizer Tray 8; |Belden AX100079
RoHS : Not Compliant

1 : $69.49
5 : $66.81
10 : $64.5

74441-0007

Molex

I/O Conn, Xfp, 30Pos, 1 X 1 (Single); |Molex 74441-0007
RoHS : Compliant

1 : $7.33
10 : $5.9
25 : $5.42
50 : $5.11
100 : $4.84
250 : $4.7
500 : $4.49
1,000 : $4.24

74441-0007

Molex

I/O Conn, Xfp, 30Pos, 1 X 1 (Single); |Molex 74441-0007
RoHS : Compliant

10 : $5.9
25 : $5.42
50 : $5.11
100 : $4.84
250 : $4.7
500 : $4.49
1,000 : $4.24

9311-00078

Amphenol SV Microwave

Mini-D Smpm Rf Male Pcb Surface Mount Co; |Amphenol Sv Microwave 9311-00078
RoHS : Not Compliant

1 : $501.26001
2 : $491.23001
5 : $481.20999

210007

Idem Safety Switches Limited

Gate Bolt, Safety Interlock Switch, Left; |Idem 210007
RoHS : Compliant

1 : $170.41
5 : $157.27
10 : $149.99001
25 : $141.2

085.613.100.070.001

ODU Steckverbindungssysteme Gmbh & Co Kg

Extraction Tool, Tweezer; |Odu-Usa 085.613.100.070.001
RoHS : Compliant

1 : $390.20001
5 : $382.39999
10 : $374.59

10007

3M Interconnect

|3M 10007
RoHS : Not Compliant

10 : $19.45
50 : $17.65
100 : $16.17
250 : $15.02
500 : $14.04

43031-0007 (430310007)

Molex

MICRO-FIT 3.0 CRIMP TERMINAL PIN W/TIN (SN) PLATED TIN/BRASS ALLOY CONTACT 20-

1 : $0.24
100 : $0.199
250 : $0.188
500 : $0.178
1,000 : $0.169

77,895

28910007

RS Pro

FAN CORD, 45DEG PLUG, NEMA 1-15 PLUG, 2 CONDUCTORS, SPT-1 72" CABLE, 18 AWG, UL

1 : $1.45

299

691345510007

Wurth Elektronik

TERMINAL BLOCK, 5.08MM, HOTIZONTAL FLANGES, HOOK ON BACK SIDE, 7 PINS
RoHS : Compliant

1 : $3.87

02810007H

Littelfuse Inc

HLDR, FUSE, 125 V, 5 A, PCB MOUNT, SUPPLEMENTARY PROTECTION, UL LISTED
RoHS : Compliant

1 : $3.94
5 : $3.82
10 : $3.74

05110007001 (110007)

Wera Werk Hermann Werner GmbH & Co. KG

1.0 X 5.5 X 125MM SLOTTED DRIVER FOR SLOTTED SCREWS, KRAFTFORM PLUS,300 SERIES

1 : $9.84
25 : $9.35
50 : $9.06

46-290F.1000.7P8

EAO AG

KEY SELECTOR SWITCH, 29 MM, 3-POSITION, K95 KEY, CAM O, KEY REMOVAL I-0-II
RoHS : Compliant

1 : $17.92

46-290H.1000.7PD

EAO AG

KEY SELECTOR SWITCH, 29 MM, 2-POSITION, K95 KEY, CAM A, KEY REMOVAL I-II

1 : $17.92

46-290J.1000.7PD

EAO AG

KEY SELECTOR SWITCH, 29 MM, 2-POSITION, K95 KEY, CAM A, KEY REMOVAL I

1 : $17.92

S1101SGAF-KT (7100079186)

SAFETY GLASSES KIT, FOAM, STRAP, CLEAR ANTI-FOG LENS, SOLUS 1000 SERIES

1 : $9.6

2455006 (25532521) (SSCIA-100075-100RS)

RS Pro

SCREW, 10/24 X 3/4 SOCKET SET SCREW-CUP POINT PLAIN FINISH

1 : $4.61

HS35R1000758701

Dynapar

ENCODER, HEAVY DUTY, HOLLOW SHAFT, 1000 PPR, 1/2" BORE, 10 PIN + MATE

1 : $1,076.56

07100/07210X (1347514)

The Timken Company

TAPER ROLLER BEARING 25.40X50.80X15.01MM

1 : $17.0

2453925 (25534365) (HCI510007500-005RS)

RS Pro

1-8 X 7 1/2 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, COARSE

1 : $20.23

100070

Lapp Group

EPIC H-B 6 SURFACE MOUNT BASE, PG16, SINGLE LEVER, 1 ENTRY W/COVER

1 : $36.15

BC10-S30-Y1X 7M (M2010007)

TURCK Inc

SENSOR, M30 CAPACITIVE, 10-15MM RANGE, 2 WIRE, 8.2VDC, NAMUR, M2010007

1 : $363.1
5 : $326.79

Microchip Technology Inc

LSZ1000-79C

Microchip Technology Inc

Si Schottky Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing

090-04710-007

Microchip Technology Inc

1x GridTime 3000, VCTCXO, 1x HV PSU, 1x LV PSU - Fixed Config 3, Projected EOL: 2051-02-27 - Contact for Pricing

121-00072-000

Microchip Technology Inc

CON, HEADER, 2MM, 2X22, SHROUDED, THRU-HOLE, 3MM TAIL, Projected EOL: - Contact for Pricing

161-30100-07-2

Microchip Technology Inc

CABLE POWER INTERNATIONAL 7.5 FT BLACK, Projected EOL: 2051-01-13 - Contact for Pricing

Sager

800-10-007-10-007000

Mill-Max Mfg Corp

Headers & Wire Housings SolderCup Head Single Row, T/H, 7P
RoHS : Compliant

50 : $20.01
100 : $14.01
250 : $9.01
500 : $6.71
1,000 : $5.31
2,500 : $4.55

2100074

Phoenix Contact

Terminals AI-GB 1,5-8 BK-1000
RoHS : Compliant

1,000 : $0.36

1553210007

Molex

Multi-Conductor Cables
RoHS : Compliant

3,000 : $16.48

399-10-150-10-007000

Mill-Max Mfg Corp

Headers & Wire Housings STANDARD PIN HEADER
RoHS : Compliant

50 : $29.74
100 : $21.16
250 : $16.26
500 : $13.64
1,000 : $11.75
2,500 : $10.23

2455RC-01000788

Honeywell Sensing and Control

Thermostats COMMERCIAL THERMAL
RoHS : Compliant

0397510007

Molex

Pluggable Terminal Blocks PLUGGABLE HEADER VERT 3.5MM 7C BLACK

4,800 : $0.5053
14,400 : $0.4281

NRAS2100-0.75A-AA

IDEC Corporation

Circuit Breakers Circuit Protector 750mA
RoHS : Compliant

1 : $42.82
10 : $40.92
20 : $39.75
39 : $38.65

1552100076

Molex

Multi-Conductor Cables

1302100079

Molex

Multi-Conductor Cables #22-4 YELLOW TPE ITC/PLTC CABLE

R10007RR03Q

C&K Switches

Rotary Switches Rotary
RoHS : Compliant

420 : $6.26

0397610007

Molex

Pluggable Terminal Blocks PIN HDR BRKBLE VERT 5.0MM 1.3D 7C GRN

4,800 : $0.5053
14,400 : $0.4281

P9-100074

OTTO Engineering Inc

Pushbutton Switches FLUSH, FASTONS, N.O.STD SNAP ACT,GRN BTN

1552210007

Molex

Multi-Conductor Cables

10410-00718

OMRON Electronic Components

Omron CA ASSY,ARM SIG,8M

0685610007

Molex

TME

01-0007.00X 1.0 ORING 70NBR

Oring Uszczelnienia Techniczne

O-ring gasket; NBR caoutchouc; Thk: 1mm; Øint: 7mm; black

1,000 : $0.0408
100 : $0.0509
10 : $0.102

2,602

10007

HELUKABEL

Wire; OZ-500; OZ; 5x0.5mm2; unshielded; 300V,500V; Cu; stranded
RoHS : Compliant

100 : $0.87
50 : $0.99
25 : $1.1
10 : $1.28
1 : $1.44

356

100.07.14.10

Fixtest Pruefmittelbau GmBH

Test probe: ICT/FCT; 3A,4A; Ø: 1.4mm; series 100; CuBe; 1N; 20mΩ

25 : $1.05
5 : $1.19
1 : $1.35

137

01-0007.00X1.5 ORING 80FPM BROWN

Oring Uszczelnienia Techniczne

O-ring gasket; FPM; Thk: 1.5mm; Øint: 7mm; brown; -20÷200°C

1,000 : $0.066
100 : $0.081
10 : $0.162

130

0010007

Lapp Group

Wire; ÖLFLEX® CLASSIC 100; 10G0.5mm2; unshielded; 300V,500V; Cu
RoHS : Compliant

100 : $1.97
50 : $2.23
25 : $2.5
10 : $2.92
1 : $3.32

103

3610 0075 12

Eaton Corporation

Wire; BETAtherm® 145; 1x0.75mm2; stranded; Cu; black; -55÷145°C

100 : $0.88
50 : $1.05
25 : $1.35
1 : $1.76

0060100070100

ALPS MAYKESTAG GmbH

Drill bit; for metal; Ø: 0.7mm; high speed steel; bulk,industrial

10 : $1.94
3 : $2.16
1 : $2.24

1100-072-1240

Amphenol Corporation

1100-072-1240

10 : $39.12
2 : $43.47

1.622.1000.70

HUMMEL AG

Cable gland; NPT1"; IP68; brass; HSK-M-Ex-d

1 : $69.37

46-290H.1000.7P8

EAO AG

Switch: rotary with key; 22mm; Stabl.pos: 2; none; IP65; prominent

100 : $21.59
25 : $24.67
5 : $27.76
1 : $30.84

1100-072-1322

Amphenol Corporation

1100-072-1322

3 : $118.39
1 : $131.55

1.209.1000.70

HUMMEL AG

Cable gland; NPT1"; IP68; polyamide; light grey; UL94V-0; HSK-K

100 : $2.26
50 : $2.57
1 : $2.83

1450.100.075.0

igus Inc

Cable chain; 1450; Bend.rad: 75mm; L: 999mm; Int.height: 21mm

10 : $86.15
5 : $92.3
1 : $98.46

55.33.9.110.0070

FINDER SpA

Relay: electromagnetic; 110VDC; 3PDT; Icontacts max: 10A; socket
RoHS : Compliant

50 : $11.25
20 : $12.8
10 : $13.58
1 : $14.36

68100075

Lapp Group

Straight terminal connector; PG13,5; Thread: PG; polyamide; IP66

30 : $1.14
10 : $1.22
1 : $1.26

ComSIT USA

4981SMBA1I10007

ims

Electronic Component
RoHS : Compliant

5,750

81000782

Sumitomo Wiring Systems LTD

Terminal contact for Rectangular Connector
RoHS : Compliant

2,000

4989SMBA1D10007

ims

Conn SMB 6GHz 50Ohm Solder ST SMD RCP Gold Over Palladium Nickel
RoHS : Compliant

685

UPD42100070

NEC Electronics Group

Electronic Component
RoHS : Not Compliant

115

PEI Genesis

CPA100-0750-BLK-SP100

DSG-Canusa

1 : $196.64
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

WPTV-06ZN25-1000-7PNC

Amphenol Corporation

RoHS : Compliant

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

WPTV-00ZN25-1000-7PEB

Amphenol Corporation

RoHS : Compliant

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

120110-0075

ITT Interconnect Solutions

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

710007-11

SOURIAU-SUNBANK

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

710007-2

SOURIAU-SUNBANK

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

001101045100070

Amphenol PCD

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

WPTV-06ZN25-1000-7SBC

Amphenol Corporation

RoHS : Compliant

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

710007-5

SOURIAU-SUNBANK

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

158510-0071

SOURIAU-SUNBANK

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

10-824810-007

Amphenol Corporation

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

010-007777-0001

Amphenol Corporation

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

WPTV-00ZN25-1000-7PBB

Amphenol Corporation

RoHS : Compliant

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

158510-0072

SOURIAU-SUNBANK

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

CPA100-0750-BLK

DSG-Canusa

1 : $0.0
10 : $0.0
25 : $0.0
50 : $0.0
100 : $0.0

Chip 1 Exchange

1MM0100076NDJGS

NIH

INSTOCK

11,200

1AB127810007

INSTOCK

2,980

99 0621 00 07

Binder UK Ltd

INSTOCK

1,562

110-0071-024

INSTOCK

1,000

W3118-Q678-A100-07

OMRON Corporation

INSTOCK

262

543-110-007

INSTOCK

UPD421000-70

NECEL

INSTOCK

Avnet Abacus

430310007

Molex

Contact PIN Crimp ST Cable Mount (Alt: 430310007)
RoHS : Compliant

180,000

10007274

Fischer Elektronik GmbH & Co KG

Heatsink Accessories (Alt: 10007274)
RoHS : Compliant

4411.0007

Schurter Electronic Components

(Alt: 4411.0007)
RoHS : Compliant

6051.0007

Schurter Electronic Components

SRT60510007 (Alt: 6051.0007)
RoHS : Compliant

416710007

Molex

(Alt: 416710007)
RoHS : Compliant

416710007

Molex

(Alt: 416710007)
RoHS : Compliant

621000700

Molex

(Alt: 621000700)
RoHS : Compliant

RDC9010007

Alpine Electronics (Asia) Ltd

(Alt: RDC9010007)
RoHS : Compliant

120110-0075

ITT Interconnect Solutions

Connector Backshell Endbell APD 51way Series Circular Connectors (Alt: 120110-0075)
RoHS : Compliant

SS-73100-073

Bel Fuse

(Alt: SS-73100-073)
RoHS : Compliant

E20711000700G

Amphenol Corporation

(Alt: E20711000700G)
RoHS : Compliant

FW-08-03-G-D-100-075

Samtec Inc

Conn Board Stacker HDR 16 POS 127mm Solder ST SMD Tube (Alt: FW-08-03-G-D-100-075)
RoHS : Compliant

800-10-007-20-101101

PRECI-DIP SSA

Conn Unshrouded Header HDR 7 POS 508mm Solder RA ThruHole Bulk (Alt: 800-10-007-20-101101)
RoHS : Compliant

850-10-007-40-251101

PRECI-DIP SSA

(Alt: 850-10-007-40-251101)
RoHS : Not Compliant

800-10-007-65-001101

PRECI-DIP SSA

Conn Unshrouded Header HDR 7 POS 254mm Press Fit ST ThruHole (Alt: 800-10-007-65-001101)
RoHS : Compliant

Avnet Asia

X1G004481000712

Epson Electronics America Inc

(Alt: X1G004481000712)
RoHS : Compliant

12,500 : $0.94118
6,250 : $0.96386
2,500 : $0.98765
1,250 : $1.01266
750 : $1.02564
500 : $1.03896
250 : $1.05263

1,250

SS-73100-073

Bel Fuse

(Alt: SS-73100-073)
RoHS : Compliant

X1G005221000711

Epson Electronics America Inc

(Alt: X1G005221000711)
RoHS : Compliant

X1G004451000700

Epson Electronics America Inc

SG5032CAN 48.000MHZ TJGA (Alt: X1G004451000700)
RoHS : Compliant

ADF6-100-07.5-L-4-0-A-TR

Samtec Inc

(Alt: ADF6-100-07.5-L-4-0-A-TR)
RoHS : Compliant

7300-8110-00700

Amphenol Corporation

(Alt: 7300-8110-00700)
RoHS : Compliant

X1G004131000712

Epson Electronics America Inc

Temperature Compensated Crystal Oscillator (TCXO) 16.368MHz ?0.5ppm Clipped Sinewave 4-Pin SMD T/R (Alt: X1G004131000712)
RoHS : Compliant

610-0070-03

Qnity Laird

(Alt: 610-0070-03)
RoHS : Compliant

X1G005221000700

Epson Electronics America Inc

SG3225EEN 156.253906MHZ CDGA (Alt: X1G005221000700)
RoHS : Compliant

100073861

Qnity Laird

TGON 805,A1 (Alt: 100073861)
RoHS : Compliant

610-0070-11

Qnity Laird

TPCM 5200 (Alt: 610-0070-11)
RoHS : Compliant

X1G004451000712

Epson Electronics America Inc

SMD Clock Oscillator 48MHz 1.6V to 3.63V 15pF 4-Pin CSMD T/R (Alt: X1G004451000712)
RoHS : Compliant

100073862

Qnity Laird

TGON 805,A1 (Alt: 100073862)
RoHS : Compliant

Q13MC3061000700

Epson Electronics America Inc

MC-306 32.768000 KHZ 8.2 +10.0-10.0 (Alt: Q13MC3061000700)
RoHS : Compliant

A610-0070-10RC

Qnity Laird

(Alt: A610-0070-10RC)
RoHS : Compliant

Avnet Silica

910007

MaxLinear Inc

6Port Gigabit Ethernet Switch 313 V to 347 V 105 Pins LGA (Alt: 910007)
RoHS : Compliant

BAT1000-7-F

Diodes Incorporated

(Alt: BAT1000-7-F)
RoHS : Compliant

R7S910007CBG#AC0

Renesas Electronics Corporation

ARM MCU 32bit ARM CortexR4F ARM CortexM3 600 MHz 153125 MB 320 Pins FBGA (Alt: R7S910007CBG#AC0)
RoHS : Compliant

TX-801-0007-24M576

Microchip Technology Inc

TX801000724M576 (Alt: TX-801-0007-24M576)
RoHS : Compliant

Component Electronics, Inc

2710007

Radio Shack

IN STOCK SHIP TODAY

1,000 : $1.0
100 : $1.15
1 : $1.54

24,760

SCC1000-7X12

IN STOCK SHIP TODAY

1,000 : $0.33
100 : $0.38
1 : $0.5

22,680

0252110007

Weidmüller Interface GmbH & Co. KG

IN STOCK SHIP TODAY

1,000 : $0.03
100 : $0.03
1 : $0.04

4,000

0252610007

Weidmüller Interface GmbH & Co. KG

IN STOCK SHIP TODAY

1,000 : $0.13
100 : $0.14
1 : $0.19

248

90331-0007

Molex

IN STOCK SHIP TODAY
RoHS : Compliant

1,000 : $0.5
100 : $0.58
1 : $0.77

129

02810007H

Littelfuse Inc

IN STOCK SHIP TODAY
RoHS : Compliant

1,000 : $1.5
100 : $1.73
1 : $2.31

JANM38510/00701BCB

Texas Instruments

IN STOCK SHIP TODAY

AX100078

Nordex

IN STOCK SHIP TODAY

1,000 : $120.0
100 : $138.46
1 : $184.62

143110007

International Rectifier

IN STOCK SHIP TODAY

MJ10007

Motorola Semiconductor Products

IN STOCK SHIP TODAY
RoHS : Not Compliant

896-1000-7

Consolidated Electronics Inc

IN STOCK SHIP TODAY

802-10-010-10-007000

Mill-Max Mfg Corp

IN STOCK SHIP TODAY
RoHS : Compliant

1,000 : $4.0
100 : $4.62
1 : $6.15

EBV Elektronik

FJ8068904310007S RGKF

Intel Corporation

Intel Core i31005G1 Processor 4M Cache up to 340 GHz FCBGA16F Tray (Alt: 999K24)
RoHS : Compliant

ECCO

10-824810-007

Amphenol Industrial Operations

50 : $4.91

1,790

Master Electronics

2100074

Phoenix Contact

AI-GB 1 5-8 BK-1000
RoHS : Compliant

1,000 : $0.4378
500 : $0.4988
30 : $0.7099

200

1041000745

OMRON Industrial Automation

CA 24V 4.5M
RoHS : Compliant

5 : $368.49
3 : $373.61
1 : $378.87

51000798

RECOM Power GmbH

20W DC-DC Converter - Medical Grade - Input: 18 to 75 VDC - Output: 15 VDC - 1.6 x1 - Through Hole
RoHS : Compliant

10 : $77.47
8 : $79.05
5 : $90.35
3 : $100.39
1 : $100.63

SGE-1510-0-0700A00300C-003

OMRON Industrial Automation

RoHS : Compliant

50 : $145.53
25 : $149.66
10 : $154.03
5 : $161.07
1 : $177.98

SGE-1510-0-0700A00700C-050

OMRON Industrial Automation

RoHS : Compliant

10 : $118.55
5 : $126.45
1 : $135.48

SGE151000700A5000C5000

OMRON Industrial Automation

RoHS : Compliant

10 : $118.55
5 : $126.45
1 : $135.48

FW-02-03-H-D-100-077

Samtec Inc

RoHS : Compliant

7,500 : $0.883
5,000 : $0.907
2,500 : $1.151
1,000 : $1.3
500 : $1.71
250 : $1.761
100 : $1.844
25 : $2.269

FW-04-03-G-D-100-070

Samtec Inc

RoHS : Compliant

7,500 : $0.87
5,000 : $0.893
2,500 : $1.151
1,000 : $1.3
500 : $1.696
250 : $1.746
100 : $1.828
25 : $2.25

FW-10-04-G-D-100-070

Samtec Inc

RoHS : Compliant

5,000 : $1.29
2,500 : $1.76
1,000 : $2.26
500 : $2.54
250 : $3.33
100 : $3.58
50 : $3.59
10 : $4.42

020410-0071

ITT Interconnect Solutions

BFH2220P002; Hermetics; Hermetics
RoHS : Not Compliant

25 : $3,160.72
19 : $3,225.22
13 : $4,616.6
7 : $8,393.18

MW-08-03-L-D-100-075

Samtec Inc

RoHS : Compliant

5,000 : $1.19
2,500 : $1.69
1,000 : $2.25
500 : $2.56
250 : $3.43
100 : $3.69
50 : $3.7
10 : $4.56

MW-13-03-F-D-100-075

Samtec Inc

RoHS : Compliant

5,000 : $1.44
2,500 : $2.12
1,000 : $2.81
500 : $3.07
250 : $4.29
100 : $4.42
50 : $4.62
5 : $5.69

NRAS2100-0.75A-AA

IDEC Corporation

CIRCUIT PROTECTOR 750MA
RoHS : Compliant

250 : $33.59
100 : $34.04
50 : $34.97
25 : $37.0
10 : $38.1
5 : $39.28
1 : $44.02

10007478

RECOM Power GmbH

Regulated DC-DC Converter - 3W - Input: 9 to 36VDC - Output: 12VDC - 6kV Isolation - CTRL Pin - DIP24
RoHS : Compliant

255 : $22.94
105 : $23.96
60 : $24.61
30 : $25.41
15 : $26.21
5 : $27.48
1 : $29.34

R10007RR03Q

C&K Switches

ROTA-SLIDE® Rotary Switch
RoHS : Compliant

2,100 : $4.37
1,575 : $4.46
1,050 : $6.49
525 : $12.29

Pasternack Enterprises US

PE3C100070

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Female Low Loss Test Cable Using PE-TC154A Coax., Pasternack’s PE3C100070 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100070 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100070 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100070 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. PE3C100070 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

150

PE3C100079

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Female Low Loss Test Cable Using PE-TC177A Coax., Pasternack’s PE3C100079 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100079 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100079 RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.45:1. This PE3C100079 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. PE3C100079 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

120

PE3C100078

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Low Loss Test Cable Using PE-TC177A Coax., Pasternack’s PE3C100078 low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100078 can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100078 RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.45:1. This PE3C100078 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

PE3C100070-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 100 CM Length Using PE-TC154A Coax., Pasternack’s PE3C100070-100CM low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100070-100CM can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100070-100CM RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100070-100CM 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100070-100CM can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $877.36
5 : $842.27
10 : $807.17
25 : $772.08

PE3C100070-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 24 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100070-24 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100070-24 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100070-24 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100070-24 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100070-24 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $767.2
5 : $736.51
10 : $705.82
25 : $675.14

PE3C100070-150CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 59.0551 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 150 CM Length Using PE-TC154A Coax., Pasternack’s PE3C100070-150CM low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100070-150CM can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100070-150CM RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100070-150CM 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 59.06-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100070-150CM can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $1,018.43
5 : $977.69
10 : $936.96
25 : $896.22

PE3C100079-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 36 Inch Length Using PE-TC177A Coax., Pasternack’s PE3C100079-36 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100079-36 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100079-36 RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.45:1. This PE3C100079-36 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100079-36 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $933.64
5 : $896.29
10 : $858.95
25 : $821.6

PE3C100079-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 12 Inch Length Using PE-TC177A Coax., Pasternack’s PE3C100079-12 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100079-12 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100079-12 RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.45:1. This PE3C100079-12 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100079-12 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $755.85
5 : $725.62
10 : $695.38
25 : $665.15

PE3C100079-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 24 Inch Length Using PE-TC177A Coax., Pasternack’s PE3C100079-24 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100079-24 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100079-24 RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.45:1. This PE3C100079-24 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100079-24 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $844.75
5 : $810.96
10 : $777.17
25 : $743.38

PE3C100079-150CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm, Length, Max: 59.0551 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 150 CM Length Using PE-TC177A Coax., Pasternack’s PE3C100079-150CM low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100079-150CM can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100079-150CM RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.45:1. This PE3C100079-150CM 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 59.06-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100079-150CM can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $1,104.43
5 : $1,060.25
10 : $1,016.08
25 : $971.9

PE3C100079-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 100 CM Length Using PE-TC177A Coax., Pasternack’s PE3C100079-100CM low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100079-100CM can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100079-100CM RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.45:1. This PE3C100079-100CM 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100079-100CM can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $958.61
5 : $920.27
10 : $881.92
25 : $843.58

PE3C100071-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.4mm Female to 2.4mm Female Low Loss Test Cable 100 CM Length Using PE-TC154A Coax., Pasternack’s PE3C100071-100CM low loss test 2.4mm female to 2.4mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm female to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a female gender on end 1 and a female on end 2. PE3C100071-100CM can also be known as a low loss test 2.4mm jack to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100071-100CM RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm female to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100071-100CM 2.4mm jack to 2.4mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm jack to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $884.11
5 : $848.75
10 : $813.38
25 : $778.02

PE3C100078-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.4mm Male to 2.4mm Male Low Loss Test Cable 100 CM Length Using PE-TC177A Coax., Pasternack’s PE3C100078-100CM low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100078-100CM can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100078-100CM RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.45:1. This PE3C100078-100CM 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $956.21
5 : $917.96
10 : $879.71
25 : $841.46

PE3C100078-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.4mm Male to 2.4mm Male Low Loss Test Cable 36 Inch Length Using PE-TC177A Coax., Pasternack’s PE3C100078-36 low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100078-36 can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100078-36 RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.45:1. This PE3C100078-36 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $931.24
5 : $893.99
10 : $856.74
25 : $819.49

PE3C10007/HS

Pasternack Enterprises