1008C-R62M Price, 판매업체, Stock

Southcos 56 Spring-Loaded Plungers provide convenient installation and removal of components. Activated with a simple pull these plungers offer simplified positioning of sliding component and quick-release for easy removal. The 56 series provides design

56-321-1-008

Southco

56-321-1-008

56-370-1-008

Southco

56-370-1-008

010080R025B

Essentra Components

080 X 14 ROUND HD SLOTTED BLK

02241-00813

Avdel

STRUCTURAL RIVET NUT ALUMINUM / ALUMINUM

E3-1010-081

Southco

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

5747-N-310-080-141

RAF Electronic Hardware

FDH Electronics

M1008-078-7408

Amphenol Aerospace

Connector 83723

801-008-16NF7-10SC

Glenair Inc

Connector Misc
RoHS : Not Compliant

801-008-16M10-2SA

Glenair Inc

Circular Conn
RoHS : Compliant

1 : $447.836
5 : $417.475
10 : $373.197
25 : $367.627
50 : $367.627
100 : $362.221
250 : $351.871
500 : $342.097
1,000 : $337.411
2,500 : $337.411
10,000 : $337.411

801-008-16M9-210PA

Glenair Inc

Circular Conn
RoHS : Compliant

1 : $236.982
5 : $220.915
10 : $197.485
25 : $194.537
50 : $194.537
100 : $191.676
250 : $186.2
500 : $181.028
1,000 : $178.548
2,500 : $178.548
10,000 : $178.548

202K163-100/86-0

TE Connectivity

Harness Mgmt
RoHS : Compliant

1 : $46.05
5 : $46.05
10 : $46.05
25 : $46.05
50 : $46.05
100 : $46.05
250 : $46.05
500 : $40.933
1,000 : $39.191
2,500 : $39.191
10,000 : $31.759

370MS038M1008-10N

Glenair Inc

Connector
RoHS : Compliant

1 : $641.309
5 : $597.831
10 : $534.424
25 : $526.448
50 : $526.448
100 : $518.706
250 : $503.886
500 : $489.889
1,000 : $483.178
2,500 : $483.178
10,000 : $483.178

301A022-100/86-0

TE Connectivity

Harness Mgmt

1 : $60.7
5 : $60.7
10 : $60.7
25 : $60.7
50 : $60.7
100 : $60.7
250 : $60.7
500 : $53.956
1,000 : $51.66
2,500 : $51.66
10,000 : $41.862

801-008-16M13-37SB

Glenair Inc

Connector
RoHS : Compliant

1 : $1,849.345
5 : $1,723.966
10 : $1,541.121
25 : $1,518.119
50 : $1,518.119
100 : $1,495.794
250 : $1,453.057
500 : $1,412.694
1,000 : $1,393.342
2,500 : $1,393.342
10,000 : $1,393.342

801-008-16NF13-37SA

Glenair Inc

Circular Conn
RoHS : Not Compliant

1 : $1,875.218
5 : $1,748.085
10 : $1,562.682
25 : $1,539.358
50 : $1,539.358
100 : $1,516.721
250 : $1,473.386
500 : $1,432.458
1,000 : $1,412.836
2,500 : $1,412.836
10,000 : $1,412.836

801-008-16ZN7-10PB

Glenair Inc

Connector
RoHS : Not Compliant

1 : $846.745
5 : $789.339
10 : $705.621
25 : $695.09
50 : $695.09
100 : $684.868
250 : $665.3
500 : $646.819
1,000 : $637.959
2,500 : $637.959
10,000 : $637.959

801-008-16ZN9-19PA

Glenair Inc

Connector
RoHS : Not Compliant

1 : $1,123.182
5 : $1,047.034
10 : $935.985
25 : $922.015
50 : $922.015
100 : $908.456
250 : $882.5
500 : $857.986
1,000 : $846.233
2,500 : $846.233
10,000 : $846.233

801-008-16ZNU6-4PA

Glenair Inc

Connector
RoHS : Not Compliant

1 : $684.273
5 : $637.881
10 : $570.227
25 : $561.716
50 : $561.716
100 : $553.456
250 : $537.643
500 : $522.708
1,000 : $515.548
2,500 : $515.548
10,000 : $515.548

801-008-16ZNU8-13PC

Glenair Inc

Connector
RoHS : Not Compliant

1 : $960.345
5 : $895.237
10 : $800.288
25 : $788.343
50 : $788.343
100 : $776.75
250 : $754.557
500 : $733.597
1,000 : $723.548
2,500 : $723.548
10,000 : $723.548

801-008-26M17-3PA

Glenair Inc

Connector
RoHS : Compliant

1 : $1,380.345
5 : $1,286.763
10 : $1,150.288
25 : $1,133.119
50 : $1,133.119
100 : $1,116.456
250 : $1,084.557
500 : $1,054.431
1,000 : $1,039.986
2,500 : $1,039.986
10,000 : $1,039.986

801-008-26M6-23PA

Glenair Inc

Circular Conn
RoHS : Compliant

Maritex

1008C-1R2J-LRH (1200NH) 2K/REEL ROHS

Prosperity Dielectrics Co Ltd

Chip inductor; SMD; 1008; 1200nH; 310mA; 5%

2,000 : $0.036
1,000 : $0.037
500 : $0.038
100 : $0.043
1 : $0.094

18,350

US1008FL_R1_00001

PanJit Semiconductor

Rectifier Diodes & Bridges; US1008FL_R1_00001; PANJIT
RoHS : Compliant

3,000 : $0.036
1 : $0.052

12,000

1008C-R39J (390NH) 2K/REEL ROHS

Prosperity Dielectrics Co Ltd

Chip inductor; SMD; 1008; 390nH; 470mA; 5%

2,000 : $0.032
1,000 : $0.036
500 : $0.039
100 : $0.043
1 : $0.046

10,986

T4011008031-000

TE Connectivity

Circular Connectors; T4011008031-000; TE CONNECTIVITY; 3; 3; Plug
RoHS : Compliant

500 : $10.021
100 : $11.148
50 : $11.916
10 : $13.462
1 : $15.725

4,103

1008CP-10NJ-LRH

Prosperity Dielectrics Co Ltd

Chip inductor; SMD; 1008; 10nH; 1000mA; 5%

1 : $0.105

4,000

1008C-12NJ (12NH) 2K/REEL ROHS

Prosperity Dielectrics Co Ltd

Chip inductor; SMD; 1008; 12nH; 1000mA; 5%

1,000 : $0.036
500 : $0.04
100 : $0.05
1 : $0.105

2,560

JWI1008C-39NJ

Jantek Electronics Co.

Chip inductor SMD; 1206; 39nH; Imax=1A; RDC=120mR; 5%

2,500 : $0.074
1,000 : $0.107
100 : $0.13
1 : $0.208

2,000

KSC1008CYTA

onsemi

Bipolar Transistors (BJT); KSC1008CYTA; ON SEMICONDUCTOR; NPN; 3; 60 V; 700 mA
RoHS : Compliant

1,000 : $0.076
500 : $0.084
100 : $0.102
30 : $0.118
5 : $0.144
1 : $0.452

1,998

STAR-XP1-2.0MM DK100825

PCB-TECH

MCPCB, thermal conductivity 2W/(m*K), thickness: 2mm, number of layers - 1, black soldermask, legend color: gold, size: star 22mm, pad cover: gold; for XP/XT LEDs, /24

480 : $0.408
120 : $0.431
24 : $0.48
1 : $0.515

1,854

1008C-1R8J (1800NH) 2K/REEL ROHS

Prosperity Dielectrics Co Ltd

Chip inductor; SMD; 1008; 1800nH; 300mA; 5%

2,000 : $0.064
1,000 : $0.074
500 : $0.08
100 : $0.087
1 : $0.094

1,692

1008C-33NJ (33NH) 2K/REEL ROHS

Prosperity Dielectrics Co Ltd

Chip inductor; SMD; 1008; 33nH; 1000mA; 5%

2,000 : $0.072
1,000 : $0.083
500 : $0.09
100 : $0.098
1 : $0.105

1,532

511100856

Molex

Rectangular Connector Housings; 511100856; MOLEX; 2; 8; Straight

10,000 : $0.08
5,000 : $0.085
100 : $0.1
30 : $0.11
10 : $0.147
1 : $0.1941

1,048

C1XP WHITE, 14MM (DK100801)

PCB-TECH

MCPCB, thermal conductivity 2W/(m*K), thickness: 2mm, number of layers - 1, white soldermask, legend color: gold, size: diameter 14mm, pad cover: gold; for XP/XT LEDs, /30

480 : $0.61
120 : $0.666
30 : $0.727
1 : $0.806

299

1010080000006

BEISIT

Floating connector for energy storage; crimp;female; power and signal; 4 pin(13mm2) + 2 pin(4mm2) + 12 pin(0.5mm2);1000V/70A (4 pin);380V/20A(2 pin) 60V/5A (12pin); black

1 : $3.061

1010080000005

BEISIT

Floating connector for energy storage; crimp;male; power and signal; 4 pin(13mm2) + 2 pin(4mm2) + 12 pin(0.5mm2);1000V/70A (4 pin);380V/20A(2 pin) 60V/5A (12pin); black

1 : $3.061

Pasternack Enterprises US

PE910086

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Commercial Grade BNC Male to SMA Female Adapter., The commercial grade BNC to SMA adapter PE910086 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a male to female gender configuration, which provides easier connections in tighter spaces. This BNC male to SMA female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910086 male BNC to female SMA adapter has a straight body. This Pasternack BNC to SMA coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 1.11-inch length, 0.62-inch width, and 0.9 lbs weight. The PE910086 adapter from Pasternack is made from a brass connector body and has a copper alloy center contact. Our BNC male to SMA female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. Additional dimensions and specifications for this between series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of BNC to SMA radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF adapter that meets your requirements.

1 : $19.29
5 : $18.9
10 : $18.52
25 : $18.13

797

PEANRBD1008

Pasternack Enterprises

Key Specifications, Antenna Type: Rubber Duck, Polarization: Vertical, Minimum Frequency: 136 MHz, Maximum Frequency: 174 MHz, Connector Series: BNC-J, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. 1.8 dBi, VHF Rubber Duck Antenna, 136-174 MHz, BNC-J Connector, Vertical Polarization. The PEANRBD1008 rubber duck antenna from Pasternack is part of our extensive line of directional antennas that we offer with global same-day shipping from our facilities certified to ISO 9001:2015. Pasternack’s high-quality single-band rubber duck antenna has a 1.8 dBi nominal gain and can be procured with no order limit. This rubber duck single-band 1.8 dBi antenna has a frequency range of 136 MHz to 174 MHz, We lead the industry in supplying products like this 136 MHz to 174 MHz single-band antenna, along with other RF, microwave, and millimeter wave components. This rubber duck antenna from Pasternack uses a BNC-J connector and has a maximum input power of 20 watts. Use our single-band rubber duck antenna with vertical polarization for fixed and mobile services, public safety or emergency services, trunking for two-way radio communications, marine or rail road communications, land mobile radio (LMR), PtP or PtMP, and P-25 applications, Pasternack’s rubber duck antenna with 1.8 dBi gain has a BNC-J-type connector. This BNC-J-series connectorized omnidirectional antenna is 0.5 inches tall, 0.5 inches wide, and 5.9 inches long. The PEANRBD1008 VHF antenna has 360-degrees of horizontal and 90-degrees of vertical HPBW. Our high-quality antenna has a maximum input VSWR (voltage standing wave ratio) of 2:1, Pasternack’s 50 Ohms impedance antenna can operate at temperatures ranging from -40 °C to 60 °C. This single-band rubber duck antenna is offered with expert technical support, PDF datasheets, and CAD drawings with dimensions and specifications. Order your 1.8 dBi VHF rubber duck antennas now and enjoy our international or domestic same-day shipping.

1 : $13.69
25 : $13.01
50 : $12.32
100 : $11.77

130

PEMAROM1008

Pasternack Enterprises

Key Specifications. Antenna Type Marine Polarization Vertical Minimum Frequency 136 MHz Maximum Frequency 174 MHz Connector Series UHF Connector Gender Female Impedance 50 Ohm Maximum Input VSWR 1.5:1. 136 to 174 MHz, Omni Marine Antenna, 3.5 dBi, UHF Female (SO239) Connector, White, Stainless Steel Radome, Vertical Polarization. The Pasternack PEMAROM1008 is a single band omni marine antenna that ships on the same day as ordered. Our vertical polarized antenna with 136 to 174 MHz frequency range has a UHF female connector. This antenna with a white radome made of stainless steel has an overall length of 53.15 inch, a width of 1.5 inch, and a weight of 0.88 lbs. Pasternack’s PEMAROM1008 is a single band antenna operating from 136 to 174 MHz with 3.5 dBi gain. The omni directional antenna has a maximum input VSWR of 1.5:1. Pasternack has one of the largest in-stock collections of omni directional antennas with our wide selection of superior quality RF parts, that ship same day. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal single band omni antenna as per your requirement.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PEWCP1008

Pasternack Enterprises

1 : $1,770.0
5 : $1,699.2
10 : $1,628.4

PE2CP1008

Pasternack Enterprises

Key Specifications, Directionality: Dual Directional, Connector Series: N, Connector Gender: Female, Design: Coupler, Minimum Frequency: 80 MHz, Maximum Frequency: 1,000 MHz, Maximum Input Power: 1,000 Watt, Coupling Value: 50 dB. Dual Directional 50 dB N Coupler From 80 MHz to 1,000 MHz Rated To 1000 Watts. RF coupler part number PE2CP1008 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is dual directional and is manufactured with N ports. Our dual directional coupler design uses N ports that are female gender and 50 Ohm impedance. The Pasternack dual directional coupler design is rated for a minimum frequency of 80 MHz and a maximum frequency of 1,000 MHz. Dual directional coupler part # PE2CP1008 is constructed with a coupling value of 50 dB and a coupler directivity of 20 dB. This female N dual directional coupler is built with a maximum insertion loss of 0.25 dB and a maximum input power of 1000 watts. Our dual directional coupler design with N connector is rated for a maximum insertion loss of 0.25 dB and a maximum VSWR of 1.3. Additional female N coupler specs for this RF component can be found on its radio frequency dual directional coupler PDF specifications datasheet above. PE2CP1008 dual directional 50 dB N coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $4,380.0
5 : $4,204.8
10 : $4,029.6

PE87FL1008

Pasternack Enterprises

Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 17.2 GHz, Bandpass Max Frequency: 18.2 GHz, RF Filter Design: Combline, Impedance: 50 Ohm, Maximum Insertion Loss: 1.5 dB, Maximum Power: 2 Watts. 6 Section Bandpass Filter With SMA Female Connectors Operating From 17.2 GHz to 18.2 GHz With a 1,000 MHz Passband. Bandpass filter PE87FL1008 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female and in a 6 section design. This 6 section SMA bandpass filter for has an insertion loss of 1.5 dB and a maximum power of 2 Watts. Frequency range of this band pass filter is 17.2 GHz to 18.2 GHz and the passband is 1 GHz. PE87FL1008 bandpass filter for band is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our 6 section bandpass filter can be bought and shipped worldwide the same-day as with our other in-stock RF parts.

1 : $630.0
10 : $604.8
25 : $579.6

PE3CA1008

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50. N Female Bulkhead to UMCX 2.5 Plug Cable Using 0.81mm Coax, RoHS. PE3CA1008 is a N type female bulkhead to UMCX 2.5 plug cable using 0.81mm coax. This Pasternack N type female bulkhead to UMCX 2.5 plug cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm UMCX 2.5 for connector 2. Our female type N bulkhead to plug UMCX 2.5 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3CA1008 type N female bulkhead to UMCX 2.5 plug cable assembly is constructed with 0.81mm coax and the maximum VSWR is 1.35:1.

PE3C10083-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Female to TNC Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC female bulkhead cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC female bulkhead cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10083-18 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10083-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10083-18 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $233.99
25 : $222.29
50 : $210.59
100 : $201.23

PE3C10084-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 3.5mm Female Bulkhead to TNC Male Right Angle Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC male right angle cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC male right angle cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and right angle a TNC cable connection on the other. Our a 3.5mm to right angle a TNC cable assembly has female gender on end 1 and male on end 2. PE3C10084-6 can also be known as a 3.5mm jack to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC plug cable assembly PE3C10084-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to right angle TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10084-6 can also be used in the other direction and will be right angle TNC male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $513.99
25 : $488.29
50 : $462.59
100 : $442.03

PE3C10086-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Female Bulkhead to TNC Female Bulkhead Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC female bulkhead cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC female bulkhead cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10086-24 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10086-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10086-24 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $528.99
25 : $502.54
50 : $476.09
100 : $454.93

PE3C10088-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Male to N Male Right Angle Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N male right angle cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N male right angle cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and right angle a type N cable connection on the other. Our a 3.5mm to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10088-12 can also be known as a 3.5mm plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N plug cable assembly PE3C10088-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to right angle type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10088-12 can also be used in the other direction and will be right angle type N male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

1 : $233.99
25 : $222.29
50 : $210.59
100 : $201.23

PE3W01008/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Female Bulkhead to Reverse Polarity TNC Male Cable Using LMR-400 Coax with HeatShrink. PE3W01008/HS is a N female bulkhead to reverse polarity TNC male cable using LMR-400 coax. This Pasternack N female bulkhead to reverse polarity TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N bulkhead to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01008/HS N female bulkhead to TNC reverse polarity male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C10085-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Female Bulkhead to TNC Female Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC female cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC female cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10085-9 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10085-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10085-9 can also be used in the other direction and will be TNC female to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $511.99
25 : $486.39
50 : $460.79
100 : $440.31

PE3C10087-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Male to N Male Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N male cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N male cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10087-18 can also be known as a 3.5mm plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N plug cable assembly PE3C10087-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10087-18 can also be used in the other direction and will be type N male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

1 : $239.99
25 : $227.99
50 : $215.99
100 : $206.39

PE3C10086-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 3.5mm Female Bulkhead to TNC Female Bulkhead Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC female bulkhead cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC female bulkhead cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10086-6 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10086-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10086-6 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $511.99
25 : $486.39
50 : $460.79
100 : $440.31

Relay Specialties

SMS1010-08H04 LF

Bestar Electric

Speakers; Magnetic -; 8 Ohms Square; Solder Pads

1 : $4.52
10 : $3.84
25 : $3.46
50 : $3.11
100 : $2.8

700

410-10/08

BlockMaster Blocks

PCB Terminal Block; 8-position 5.00mm; PCB Mount; Vertical Black

1 : $0.94
10 : $0.92
25 : $0.91
50 : $0.9
100 : $0.89

518

511008

Johnson Electric Group

T-H ACTUATOR (TH511008000)

1 : $27.12
5 : $26.11
10 : $24.31
25 : $22.74
50 : $21.36

155

31137110-08

METZ CONNECT USA

RIA SCREW TYPE TERMINAL BLOCK,

1 : $7.23
5 : $6.96
10 : $6.48
25 : $6.06
50 : $5.7

100

5100-822

Visual Communications Company

Incandescent Indicator; 125 V 0.688" Tab Terminals (Quick Connect)
RoHS : Compliant

1 : $11.35
10 : $10.95
25 : $10.58
50 : $10.23
100 : $9.9

5100-824

Visual Communications Company

Incandescent Indicator; 125 V 0.688" Tab Terminals (Quick Connect)
RoHS : Compliant

1 : $11.35
10 : $10.95
25 : $10.58
50 : $10.23
100 : $9.9

TH551008000

Johnson Electric Group

T-H ACTUATOR (TH36F-020)

1 : $15.77
5 : $15.19
10 : $14.14

CM5100-832

Visual Communications Company

CML INDICATOR LIGHT HOUSING

1 : $14.41
10 : $13.9

TE Connectivity

66100-8

TE Connectivity

III+ SKT,18-16,15AU/FL,STRIP Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 18 – 16 AWG Wire Size: .8 – 1.4 mm² Gold (Au) Socket Tin 18 – 16 AWG | TE Connectivity
RoHS : Compliant

2,500 : $1.69
1,000 : $1.74
500 : $1.78
250 : $1.83
100 : $1.87
50 : $1.92
25 : $1.96
10 : $2.01
1 : $2.05

20,779

1734100-8

TE Connectivity

Champ050 series,80pos,Au over PdNi PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 80 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $5.37
500 : $5.52
250 : $5.69
100 : $5.88
50 : $6.05
1 : $6.64

1,936

T2070011008-000

TE Connectivity

DAM-08 Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Gold Wire Size: 28 – 24 AWG Wire Size: .08 – .21 mm² Gold (Au) Pin 28 – 24 AWG | TE Connectivity
RoHS : Compliant

1,000 : $2.78
500 : $2.87
250 : $2.95
100 : $3.03
50 : $3.12
25 : $3.2
10 : $3.29
1 : $3.37

1,511

HSC1008R0J

TE Connectivity

HSC100 8R0 5% Resistance Value: 8 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 8 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

10 : $23.59
1 : $26.21

196

2-1445100-8

TE Connectivity

MICRO MNL HDR ASSY S/ROW LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 8 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 8 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $2.36
100 : $2.93
25 : $3.09
10 : $3.58
1 : $3.99

146

T2020011008-000

TE Connectivity

DDM-0.75 Contact Mating Area Plating Material: Gold (Au) Contact Type: Pin Wire Contact Termination Area Plating Material: Gold Wire Size: 18 AWG Wire Size: .75 mm² Gold (Au) Pin 18 AWG | TE Connectivity
RoHS : Compliant

1,000 : $3.23
500 : $3.33
250 : $3.42
100 : $3.52
50 : $3.62
25 : $3.72
10 : $3.81
1 : $3.91

114

202K142-100/86-0

TE Connectivity

202K142-100/86-0 Body Orientation: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 100 Material Systems Code: 100 Straight 202 100 | TE Connectivity
RoHS : Compliant

1 : $47.98

100

T2030001008-000

TE Connectivity

CEM-0.75 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 18 AWG Operating Voltage: 250 VAC Silver (Ag) Pin 18 AWG | TE Connectivity
RoHS : Compliant

1,000 : $0.9
500 : $0.92
250 : $0.95
100 : $0.98
50 : $1.01
25 : $1.03
10 : $1.06
1 : $1.09

202K163-100/86-0

TE Connectivity

202K163-100/86-0 Body Orientation: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 100 Material Systems Code: 100 Straight 202 100 | TE Connectivity
RoHS : Compliant

1 : $36.71

FN2060-10-08

TE Connectivity

FN2060-10-08 Current Rating: 10 A Input Termination Type: Threaded Stud Output Termination Type: Threaded Stud Leakage Current (Max) (120VAC, 60Hz): .38 mA Leakage Current (Max) (250VAC, 50Hz): .66 mA 10 A Threaded Stud .38 mA | TE Connectivity
RoHS : Compliant

25 : $87.06
10 : $93.76
1 : $100.46

T2020001008-000

TE Connectivity

CDM-0.75 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 18 AWG Wire Size: .75 mm² Silver (Ag) Pin 18 AWG | TE Connectivity
RoHS : Compliant

1,000 : $0.92
500 : $0.95
250 : $0.97
100 : $1.0
50 : $1.03
25 : $1.06
10 : $1.09
1 : $1.11

HSC1008R2J

TE Connectivity

HSC100 8R2 5% Resistance Value: 8.2 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 8.2 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

10 : $23.58
1 : $26.2

FN2070-10-08

TE Connectivity

FN2070-10-08 Current Rating: 10 A Input Termination Type: Threaded Stud Output Termination Type: Threaded Stud Leakage Current (Max) (120VAC, 60Hz): .38 mA Leakage Current (Max) (250VAC, 50Hz): .66 mA 10 A Threaded Stud .38 mA | TE Connectivity
RoHS : Compliant

10 : $180.87
1 : $200.97

3650/1008LABKIT

TE Connectivity

3650 1008 LAB KIT Inductor Type: High Frequency Package Size Code: 1008 Element Type: Wire Wound High Frequency 1008 Wire Wound | TE Connectivity
RoHS : Compliant

1 : $1,665.88

STXR40AZ00-1008BI

TE Connectivity

STXR40AZ00-1008BI Connector Backshell Product Style: Ruggedized Connector Backshell Product Type: Backshell Cable Entry Diameter: .01 – .5 in Cable Entry Diameter: .2 – 12.7 mm Primary Product Material: Aluminum Ruggedized Backshell .01 – .5" .2 – 12.7 mm | Aluminum | TE Connectivity
RoHS : Compliant

1 : $68.71

Venkel Ltd.

C0201HQN100-8R4CNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;8.4pF;�0.25pF
RoHS : Compliant

WRFI1008-S-39NJT

VENKEL LTD

Wirewound RF Inductor;1008;39nH;�5%
RoHS : Not Compliant

WRFI1008-S-4R7GT

VENKEL LTD

Wirewound RF Inductor;1008;4.7uH;�2%
RoHS : Not Compliant

WRFI1008-S-56NKT

VENKEL LTD

Wirewound RF Inductor;1008;56nH;�10%
RoHS : Not Compliant

WRFI1008-S-R10GT

VENKEL LTD

Wirewound RF Inductor;1008;100nH;�2%
RoHS : Not Compliant

WRFI1008-S-R47GT

VENKEL LTD

Wirewound RF Inductor;1008;470nH;�2%
RoHS : Not Compliant

WRFI1008-S-123KT

VENKEL LTD

Wirewound RF Inductor;1008;12uH;�10%
RoHS : Not Compliant

WRFI1008-S-24NKT

VENKEL LTD

Wirewound RF Inductor;1008;24nH;�10%
RoHS : Not Compliant

WRFI1008-S-91NGT

VENKEL LTD

Wirewound RF Inductor;1008;91nH;�2%
RoHS : Not Compliant

WRFI1008-S-R15GT

VENKEL LTD

Wirewound RF Inductor;1008;150nH;�2%
RoHS : Not Compliant

WRFI1008-S-R39KT

VENKEL LTD

Wirewound RF Inductor;1008;390nH;�10%
RoHS : Not Compliant

C0201X7R100-822JNP

VENKEL LTD

Chip Capacitor;0201;X7R;10V;8200pF;�5%
RoHS : Compliant

CTL1008DRD1T

VENKEL LTD

Chip Type LED;1008;Dome Lens;Red
RoHS : Compliant

WRFI1008-S-15NJT

VENKEL LTD

Wirewound RF Inductor;1008;15nH;�5%
RoHS : Not Compliant

WRFI1008-S-3R9JT

VENKEL LTD

Wirewound RF Inductor;1008;3.9uH;�5%
RoHS : Not Compliant

Vyrian

MYRBP410080B21RD

Murata Manufacturing

Switching Regulator, 2.3A, 3600kHz Switching Freq-Max, PDSO6

9,192

MT5C1008SJ-45AT

Micron Technology Inc

Standard SRAM, 128KX8, 45ns, CMOS, PDSO32
RoHS : Not Compliant

6,745

MT5C1008EC55L

Micron Technology Inc

Standard SRAM, 128KX8, 55ns, CMOS, CDSO32
RoHS : Not Compliant

6,616

MT5LC1008DJ-25LPXTTR

Micron Technology Inc

Standard SRAM, 128KX8, 25ns, CMOS, PDSO32
RoHS : Not Compliant

5,743

MT5C1008-55IT

Micron Technology Inc

Memory IC

5,235

MT5LC1008W-15LP

Micron Technology Inc

Standard SRAM, 128KX8, 15ns, CMOS, PDIP32
RoHS : Not Compliant

4,586

MT5C1008XDM3-25

Micron Technology Inc

Memory IC

4,538

MT5C1008SJ-20LP

Micron Technology Inc

Standard SRAM, 128KX8, 20ns, CMOS, PDSO32
RoHS : Not Compliant

4,132

202K163-100/86-0

TE Connectivity

HEAT SHRINK BOOT, Adhesive, 43 ID Before Shrink
RoHS : Compliant

4,038

MT5C1008DJ-15AT

Micron Technology Inc

Standard SRAM, 128KX8, 15ns, CMOS, PDSO32
RoHS : Not Compliant

3,942

MT5C1008F25/883C

Micron Technology Inc

Standard SRAM, 128KX8, 25ns, CMOS, CDFP32
RoHS : Not Compliant

3,552

MT5LC1008DJ-20LAT

Micron Technology Inc

Standard SRAM, 128KX8, 20ns, CMOS, PDSO32
RoHS : Not Compliant

3,219

MT5LC1008-25LP

Micron Technology Inc

Standard SRAM, 128KX8, 25ns, CMOS, PDIP32
RoHS : Not Compliant

3,178

MT5C1008SJ-20LXT

Micron Technology Inc

Standard SRAM, 128KX8, 20ns, CMOS, PDSO32
RoHS : Not Compliant

2,617

MT5C1008C-45LIT

Micron Technology Inc

Standard SRAM, 128KX8, 45ns, CMOS, CDIP32
RoHS : Not Compliant

2,549

Waytek, Inc.

10080

Hillsdale Terminal & Tool Inc

22-18 GA Butt Connectors NON-INSULATED

100 : $0.0552
200 : $0.0501
500 : $0.0448
1,000 : $0.0406
5,000 : $0.0388

137,567

19141-0085

Molex

12-10 GA #10 Spade Terminal Non-Insulated
RoHS : Compliant

100 : $0.1707
200 : $0.1551
500 : $0.1379
1,000 : $0.1253
5,000 : $0.1195

18,746

OS110-08

NSPA

12-10GA Ring #8 Connector Yellow Stripe Heat Shrink Clear 3280132508 32708

10 : $1.1347
50 : $1.0112
100 : $0.9176
200 : $0.8876
500 : $0.8576
1,000 : $0.824

1,302

57080 OR 611-008

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #8 Band 1/2" 7/16 TO 1 IN

10 : $1.378
50 : $1.2299
100 : $1.116
200 : $1.0819
500 : $1.0421
1,000 : $1.0022

1,131

13510085

Aptiv PLC

2 Way Female GT 150 Sealed Connector DELPHI 13510085

10 : $0.9708
50 : $0.9347
100 : $0.8384
200 : $0.7982
500 : $0.7703
1,000 : $0.7421

372

14100853

Sargent Quality Tools

Crimp Tool Ratchet Assembly Delphi GM 08913440 Formally MFG PN 3182 LCT

1 : $212.23
10 : $199.34

14100855

Sargent Quality Tools

Metri-Pack Crimping Tool DELPHI # 12070947 (Formally PN SP2740/3184LCT)

1 : $212.23
10 : $199.34

14100859

Sargent Quality Tools

Crimp Tool 8 Ga - 2 Ga (Formally PN SP2747 / 6220 CT)

1 : $179.83
10 : $168.9

1008C-R62M 판매업체

링크 URL