 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
10103CC02T-XCFPU 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
 Newark | MTMM-101-03-T-S-200 | Samtec Inc | Pin Header, Board-To-Board, 1 Rows; |Samtec, Inc. MTMM-101-03-T-S-200 RoHS : Compliant |
| 2,849 | |
| MTMM-101-03-T-S-163 | Samtec Inc | Pin Header, Board-To-Board, 1 Rows; |Samtec, Inc. MTMM-101-03-T-S-163 RoHS : Compliant |
| 2,849 | ||
| MTMM-101-03-G-D-125 | Samtec Inc | Pin Header, Board-To-Board, 2 Rows; |Samtec, Inc. MTMM-101-03-G-D-125 RoHS : Compliant |
| 2,493 | ||
| MTMM-101-03-G-D-170 | Samtec Inc | Pin Header, Board-To-Board, 2 Rows; |Samtec, Inc. MTMM-101-03-G-D-170 RoHS : Compliant |
| 2,493 | ||
| PT10MV10103A1010PMS | Amphenol Piher | Trimmer, 10K, 10%, Carbon, 0.15W; Trimmer Type:Single Turn; Element Material:Carbon; Adjustment Type:Top Adjust; Track Resistance:10Kohm; Potentiometer Mounting:Through Hole; No. Of Turns:1Turns; Product Range:Pt-10 Series Rohs Compliant: Yes RoHS : Compliant |
| 1,524 | ||
| PTC10LV10103A1010 | Amphenol Piher | Trimpot, 10K, 10%, Cermet, 0.33W; Trimmer Type:Single Turn; Element Material:Cermet; Adjustment Type:Top Adjust; Track Resistance:10Kohm; Potentiometer Mounting:Through Hole; No. Of Turns:1Turns; Product Range:Ptc-10 Series Rohs Compliant: Yes RoHS : Compliant |
| 992 | ||
| F10-10103045R | Harwin | Mezzanine Conn, Rcpt, 30Pos, 2Row, 0.5Mm; |Harwin F10-10103045R RoHS : Compliant |
| 210 | ||
| FMC1010315-36 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 36", 914.4Mm, Rg316; |Fairview Microwave FMC1010315-36 RoHS : Not Compliant |
| 161 | ||
| FMC1010315-60 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 5 Ft, 1.52M, Rg316; |Fairview Microwave FMC1010315-60 RoHS : Not Compliant |
| 161 | ||
| 95293-101-03LF | Amphenol Communications Solutions | Conn, Header, 3Pos, 1Row, 2.54Mm; Connector Systems:Board-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:3Contacts; Contact Termination Type:Through Hole Straight; Product Range:Bergstik 95293 Series Rohs Compliant: Yes RoHS : Compliant |
| 93 | ||
| 216010-1032 | Molex | Cable, 3P Sup Sabre Rcpt-Rcpt, 11.8"; Connector To Connector:Super Sabre Receptacle To Super Sabre Receptacle; No. Of Positions:3Positions; Connector Pitch:7.5Mm; No. Of Rows:1 Row; Cable Length - Metric:300Mm; Wire Gauge:10Awg Rohs Compliant: Yes RoHS : Compliant |
| 50 | ||
| P11H1F0GHFW10103KA | Vishay Intertechnologies | Rotary Pot, 10K, 1W, Panel Mount; |Vishay P11H1F0GHFW10103KA RoHS : Compliant |
| 9 | ||
| 96310103 | Bopla | Bocube Quick-Release Hinge Lock For Width 80 Mm 2-Pc Set. Ral 1023 Yellow Rohs Compliant: Yes |Bopla 96310103 RoHS : Compliant |
| 3 | ||
| 10103202SP | nVent Hoffman | Compe Cap 88 108 Mfd 250V; |Nvent Hoffman 10103202SP RoHS : Compliant |
| 1 | ||
| ESX10-103-DC24V-10A-E | E-T-A | Circuit Breaker, 1P, 10A, 24Vdc; |Eta ESX10-103-DC24V-10A-E RoHS : Compliant |
| 1 | ||
 RS | CAY10-103J4LF | Bourns Inc | RESISTOR, CHIP ARRAY,10 KILOHMS,32 MW @ DEGC,+ 5%,25 V (MAX.) RoHS : Compliant |
| 10,000 | |
| 111-0103-001 | Cinch Connectivity Solutions | INSULATED BINDING POST - BLACK, 111 SERIES RoHS : Compliant |
| 788 | ||
| SSX-75-A-4.9-G (101033-011-922) | Smiths Interconnect | SPRING CONTACT PROBE, CURRENT: 3 A, 2.4/4.9 OZ., RESISTANCE < 25 MO, MAX .050" |
| 200 | ||
| 149-71103A (14910FAGJSX10103KA) | Vishay Sfernice | POTENTIOMETER CERMET CERMET LINEAR RESISTANCE 10 KILOHMS POWER 1 W 149 SERIES |
| 200 | ||
| 1010308 | Phoenix Contact | THERMOMAGNETIC DEVICE CIRCUIT BREAKER NUMBER OF POSITIONS: 3 RoHS : Compliant |
| 24 | ||
DSPIC30F1010-30I/SP | Microchip Technology Inc | DSP, 16-BIT, 6KB FLASH, 256 RAM, 21 I/O, SMSP, SDIP-28 RoHS : Compliant |
| 11 | ||
| TESZ1102/S/35 (101030515) | Schmersal | HINGE SAFETY SWITCH, THERMOPLASTIC, 1)NO/2NC CONTACTS, 35 MM PROFILES |
| 8 | ||
| 1010302 | Phoenix Contact | CIRCUIT BREAKER, THERMOMAGNETIC, 50A, 3 POSITIONS, SCREW CONN, TMC 83C 50A RoHS : Compliant |
| 3 | ||
| 1010307 | Phoenix Contact | THERMOMAGNETIC DEVICE CIRCUIT BREAKER NUMBER OF POSITIONS: 3 RoHS : Compliant |
| 2 | ||
| 1.132.101.033 | Fritz Kuebler Gmbh | KUBLER, COUNTER, 7 DIGITS, 25HZ, 24VDC, NO RESET, DIN RAIL MOUNT |
| 2 | ||
| 1.01.0331.20000 | Hms Industrial Networks AB | CANBRIDGE NT200, 2 CAN, IXXAT SERIES |
| 2 | ||
| 1.01.0314.22011 | Hms Industrial Networks AB | IXXAT CAN-IB810/PMC - 2X CAN PORTS |
| 1 | ||
| 0181-01-037-048-0-0-990 | Murrplastik Systemtechnik GmbH | MP18.1 CABLE CARRIER 18HX37WX990L MM, 48MM BEND RADIUS 1M LONG NO END BRACKETS |
| 1 | ||
| TIM310-1030000 (1052627) | SICK AG | VISION SENSOR, 2D, 0-2M RANGE AT 10%, 4M MAX, 270 DEGREE, IP65 |
| 1 | ||
| 10103 | Gems Sensors & Controls | STRN RLF, NYL HEYCO 1147 BIG |
| 0 | ||
 Bisco Industries | 101-0375062-NT-50 | Parker-TexLoc | 950 | |||
| 1010-3-05-15-00-00-01-0 | Mill-Max Mfg Corp | RoHS : Compliant | 518 | |||
| 111-0103-001 | Cinch Connectivity Solutions | RoHS : Compliant | 499 | |||
| 10-103-4-01 | Staffall | 300 | ||||
| 10-103-2-05 | Staffall | 62 | ||||
| 100101036 | Misc. Rods and Studs | 40 | ||||
| 1110103 | Unbrako Group | 30 | ||||
| 101010342 | MISCELLANEOUS | 25 | ||||
| 09-3010-1-0310 | Staffall | 23 | ||||
| 051-010-3196220 | ITT Interconnect Solutions | RoHS : Not Compliant | 16 | |||
| 10103-SS-0440-7 | Amatom Electronic Hardware | 15 | ||||
| 09-3010-1-0312 | Staffall | 8 | ||||
| 02-10-103-20 | Southco | 4 | ||||
| 10-103-3-01 | Staffall | 3 | ||||
| 051-010-3850220 | ITT Interconnect Solutions | 1 | ||||
 TME | AK-310103-030-S | Digitus | Cable; D-Sub 15pin HD plug,both sides; shielded twofold; black |
| 64 | |
| 10103 | HELUKABEL | Wire; JZ-500; JZ; 12G1.5mm2; unshielded; 300V,500V; Cu; stranded RoHS : Compliant |
| 36 | ||
| 1520-0101-03 | Encitech AB | Enclosure for connectors: D-Sub; straight; Locking: screws; ABS |
| 25 | ||
| 10103 | ProLinear/PONTECH Inc | Screwdriver: standard; slot; SL 5; SOFT-TOUCH; 200mm |
| 12 | ||
| 1310-1033-01 | Encitech AB | Adapter; HDMI socket,HDMI plug; 1310; straight; IP67 |
| 4 | ||
| 10103 | Wiha Quality Tools | Socket: 6-angles; insulated,socket spanner; HEX 7mm; 1/4" |
| 2 | ||
| DMG10600C101_03WTC | Dwin Technology | Display: TFT; 10.1"; 1024x600; Illumin: LED; 16MBFLASH; RGB; 8pin,SD |
| 1 | ||
| 10103906 | Essentra Components | Stopper; H: 12mm; push-in; Flange dia: 36mm; black; LDPE |
| 0 | ||
| 111010-31 | LED2WORK GmbH | Lamp: machine light; 4W; 24VDC; L: 180mm; 0.17A; 60000h; 120°; IP54 |
| 0 | ||
| 1310-1036-02 | Encitech AB | Adapter cable; 1310; USB 3.0,with protective cap; 1m; IP67 |
| 0 | ||
| 2101-0300-12 | Encitech AB | Connector: D-Sub HD; PIN: 26; plug; female; data transfer; straight |
| 0 | ||
| 017-1-010-3-H5STF-LT0 | MPE-Garry GmbH | Socket: integrated circuits; DIP10; Pitch: 2.54mm; precision; SMT RoHS : Compliant |
| 0 | ||
| 111010-32 | LED2WORK GmbH | Lamp: machine light; 6W; 24VDC; L: 260mm; 0.25A; 60000h; 120°; IP54 |
| 0 | ||
| 1310-1036-03 | Encitech AB | Adapter cable; 1310; USB 3.0,with protective cap; 1.5m; IP67 |
| 0 | ||
| 2101-0300-13 | Encitech AB | Connector: D-Sub HD; PIN: 44; plug; female; data transfer; black |
| 0 | ||
 ComSIT USA | CR10103JK | ASJ Holdings Limited | GENERAL PURPOSE THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 10000ohm, 50V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 50,000 | ||
| BFC233810103 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount RoHS : Not Compliant | 5,500 | |||
| PT10LV10103A2020PMS | Amphenol Piher | TRIMMPOTENTIOMETER, 10K, 0.15W, 1GANG RoHS : Compliant | 5,000 | |||
| PTC10LV10103A2020 | Amphenol Piher | 10 MM CERMET POTENTIOMETER Trimmer, Cermet, 0.33W, 10000ohm, 20% +/-Tol, 1 Turn(s) RoHS : Compliant | 400 | |||
| 31010320 | Schurter Electronic Components | Fuse Holder Holder Cartridge 16A Panel Mount RoHS : Compliant | 100 | |||
| JM3851010304BGA | National Semiconductor Corporation | VOLTAGE COMPARATOR Comparator, 1 Func, 3000uV Offset-Max, 640ns Response Time, BIPolar, MBCY8 RoHS : Not Compliant | 15 | |||
 Interstate Connecting Components | VX1010300000G | Amphenol Anytek | VX- 3.5- 25P ORANGE C0110 PIN | 0 | ||
| K1010388 | TE Connectivity | TOGGLE SWITCH 07-1-2-12 933 RoHS : Not Compliant | 0 | |||
| 101-0334-002 | ITT Interconnect Solutions | 1010334002 | 0 | |||
| 10103269-003LF | Amphenol FCi | HEADER JUMPER-10103269-003LF | 0 | |||
| 1010351-F | TE Connectivity | LMEM012UB6S;PRES;0-1250PA;0,5- RoHS : Compliant | 0 | |||
| 1010388-F | TE Connectivity | LMIS100UB3S; PRES;0...100PA;I2 RoHS : Compliant | 0 | |||
| OQ1271010300G | Amphenol Anytek | OQ-5.0- 12P BLACK CONTACT WIT | 0 | |||
| 891-010-37PA2-BSST-513 | Glenair Inc | 0 | ||||
| 95293-101-03LF | Amphenol FCi | HDR STR SR.100 DP SMT RoHS : Compliant |
| 0 | ||
| 101-0333-000 | ITT Interconnect Solutions | INSULATOR MS-R 18-4P | 0 | |||
| M85049/10-103W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| 51722-10103600AALF | Amphenol FCi | PWRBLADE RAH-51722-10103600AAL RoHS : Compliant | 0 | |||
| 101-0335-000 | ITT Interconnect Solutions | 1010335000 | 0 | |||
| 10103120-00 | TE Connectivity | NTC TEMPERATURE SENSOR |
| 0 | ||
| 2CMA101030R1000 | Amphenol Sine Systems | 232BS6B WALL MOUNTED INLET | 0 | |||
 NexGen Digital | CAT10-103J4LF | Bourns Inc | RoHS : Compliant | 4,614 | ||
| CR10-103J | MERITEK Electronics Corporation | 2,354 | ||||
| PT-10LV10103A2020 | Amphenol Piher | 1,960 | ||||
| JM38510/10304BGC | Texas Instruments | 22 | ||||
| S1210-103K | API Delevan | RoHS : Not Compliant | 18 | |||
| 010-10302-00 | Garmin Ltd | 8 | ||||
 Rutronik | CR10-103-JN | ASJ Holdings Limited | RC0402 10K 5% 0,063W TK100 RoHS : Compliant |
| 7,400,000 | |
| CR10-103-JK | ASJ Holdings Limited | RC0402 10K 5% 0,063W TK100 RoHS : Compliant |
| 980,000 | ||
| 10103594-0001LF | Amphenol Communications Solutions | Micro-USB Type-B 2.0 05P R/A SMT RoHS : Compliant |
| 40,500 | ||
| BFC233810103 | Vishay Intertechnologies | FF 10nF 440Vac 20% X1 P15 MKP RoHS : Compliant |
| 2,000 | ||
 Avnet Silica | M38510/10301BGA | Teledyne HiRel | E2VM3851010301BGA (Alt: M38510/10301BGA) RoHS : Not Compliant | 0 | ||
| M38510/10301BGA | Teledyne HiRel | E2VM3851010301BGA (Alt: M38510/10301BGA) RoHS : Not Compliant | 0 | |||
| M38510/10304BGX | Teledyne HiRel | Quad operational amplifier medium power (Alt: M38510/10304BGX) RoHS : Compliant | 0 | |||
| DSPIC30F1010-30I/SP | Microchip Technology Inc | (Alt: DSPIC30F1010-30I/SP) RoHS : Compliant | 0 | |||
| R7F7010103AFP-C#AA4 | Renesas Electronics Corporation | IC MCU 32BIT 512KB FLASH 48LQFP (Alt: R7F7010103AFP-C#AA4) RoHS : Compliant | 0 | |||
DSPIC30F1010-30I/SO | Microchip Technology Inc | (Alt: DSPIC30F1010-30I/SO) RoHS : Compliant | 0 | |||
DSPIC30F1010-30I/MM | Microchip Technology Inc | (Alt: DSPIC30F1010-30I/MM) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ASPI-F1010-3R3M-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| EV_MOD_CH101-03-01 | TDK Invensense | Eval Unit for Chirp - Low-Power, MEMS Ultrasonic Time-of-Flight Sensor in 3.5mm x 3.5mm Package with Wide FoV (180?) Cap |
| 0 | ||
ASPIAIG-Q1010-3R3M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 DB Roberts | B4-10-103-12 | Southco |
| 89 | ||
| 10103 | Essentra Components | 0 | ||||
| 8310-1032-SS | RAF Electronic Hardware | 0 | ||||
| B4-10-103-75 | Southco | 0 | ||||
| 57-10-103-10 | Southco | 0 | ||||
| R4-10-10-301-10 | Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | 0 | |||
| 4710-1032-A | RAF Electronic Hardware | 0 | ||||
| AEOS10-1032-130 | PennEngineering (PEM) | Features a low-profile.Allows near-flush installations with no need for special hole preparations such as countersinking or dimpling.Additional thread sizes and grip ranges available. | 0 | |||
| 47-10-103-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 01810-10375 | Avdel | BRIV RIV 18 CK ST | 0 | |||
| 1010360000VR | Essentra Components | 0 | ||||
| 2110-1032-S-12 | RAF Electronic Hardware | HEX FEMALE STANDOFF 1/4 HEX X 7/8 LENGTH ZINC CLEAR CHROMATE | 0 | |||
| AEOS10-1032-130-NYPA | PennEngineering (PEM) | 0 | ||||
| 47-10-103-14 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 57101-03204 | Avdel | NEOSPEED RIV 18 MH AL EXT L | 0 | |||
 EBV Elektronik | DSPIC30F1010-30I/SP | Microchip Technology Inc | (Alt: DSPIC30F1010-30I/SP) RoHS : Compliant | 0 | ||
| DSPIC30F1010-30I/SO | Microchip Technology Inc | (Alt: DSPIC30F1010-30I/SO) RoHS : Compliant | 0 | |||
 Maritex | GPHA101-0301A001A1BA | Greenconn Corp | Pin Header; pitch 2.54mm; 1x3 pins; assembly: THT; male; straight; single row |
| 4,260 | |
| 3101.0315 | Schurter Electronic Components | Fuse holder; 5x20mm; panel mount; Fingergrip; 4.8x0.5mm quick-connect; 250VAC; 10A; IP67 RoHS : Compliant |
| 1,000 | ||
| 3101.0310 | Schurter Electronic Components | Fuse holder; 5x20mm; panel mount; slotted; 4.8x0.5mm quick-connect; 250VAC; 10A; IP67 RoHS : Compliant |
| 991 | ||
| RNP18-PK1010-103K | RDA Microelectronics | Inductor: wire; THT; 10000uH; 0.25A; 14.6R; 11.5x11.5mm; 10% |
| 100 | ||
| RNP18-PK1010-331K | RDA Microelectronics | Inductor: wire; THT; 330uH; 1.4A; 0.51R; 11.5x11.5mm; 10% |
| 100 | ||
| RNP18-PK1010-332K | RDA Microelectronics | Inductor: wire; THT; 3300uH; 0.5A; 4.65R; 11.5x11.5mm; 10% |
| 100 | ||
| NC-24CW108-XP (DK110103) | PCB-TECH | MCPCB, thermal conductivity 2W/(m*K), thickness: 1.6mm, number of layers - 1, copper layer thickness 35um, white soldermask, legend color: gold, size: diameter 108mm, pad cover: gold; for XP/XT LEDs, /24 |
| 73 | ||
| A11-0103 | POKOJ | Installation terminal block; 1-level; 2-contacts; for wire 0,5-4,0mm2; screw terminal; black; Din rail; 1000V/32A |
| 20 | ||
| L-RNP18-PK1010-332M | RDA Microelectronics | Choke Coil |
| 10 | ||
 Neutron USA | 3101.0331 | Schurter Electronic Components | Fuse Holder FPG3 FUSEHOLDER 5X20 IP 40 RoHS : Compliant |
| 50 | |
| 1010300000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks WPE 10,WM,GN/YL RoHS : Compliant |
| 50 | ||
| 3101.0325 | Schurter Electronic Components | Fuse Holder FPG2 FUSEHOLDER 5X20 IP 67 RoHS : Compliant |
| 50 | ||
| 3101.0310 | Schurter Electronic Components | Fuse Holder FPG1 STANDARD KNOB IP67 PROTECTION RoHS : Compliant |
| 50 | ||
| 1010308 | Phoenix Contact | Circuit Breakers TMC 83B 40A RoHS : Compliant |
| 24 | ||
| 1010301 | Phoenix Contact | Circuit Breakers TMC 83C 60A RoHS : Compliant |
| 21 | ||
| FN2660-10-103-C0909 | Schaffner | Power Line Filters FN2660-10-103-C0909 RoHS : Compliant |
| 14 | ||
| 1.01.0331.20000 | Hms Industrial Networks AB | Interface Modules CANbridge NT200, 2 CAN |
| 3 | ||
| 1010302 | Phoenix Contact | Circuit Breakers TMC 83C 50A RoHS : Compliant |
| 3 | ||
| A1-101-03 | OTTO Engineering Inc | Switch Actuators Lever Left-hand Left-hand |
| 2 | ||
| JAC-10-103 | Cosel USA Inc | Power Line Filters AC 3 Phase 500 10A EMI/EMC Filter RoHS : Compliant |
| 1 | ||
| TIM310-1030000 | SICK AG | 2D Laser Scanner; 0-2M Range @ 10%; 4M MAX; 270 Degree; IP65 |
| 0 | ||
| ESX10-103-DC24V-10A-E | E-T-A | Circuit Breakers 508, 1P, PL, 24VDC, N/O, RF, SF, 10A ATEX RoHS : Compliant |
| 0 | ||
| 1.01.0351.12001 | Hms Industrial Networks AB | Interface Modules USB-to-CAN FD isolated; SUB-D9 |
| 0 | ||
| C2110-1039 | Transition Networks Inc | Transition Networks Fast Ethernet Media Converter 100BASE-TX to 100BASE-FX |
| 0 | ||
 Pasternack Enterprises US | PE910103 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 6 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Gold, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Gold. Commercial Grade RP-SMA Female to RP-SMA Female Adapter., The commercial grade SMA adapter PE910103 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.35:1. This RF adapter has a female to female gender configuration, which provides easier connections in tighter spaces. Our reverse polarity SMA to reverse polarity SMA adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 6 GHz. This SMA reverse polarity female to SMA reverse polarity female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910103 female SMA to female SMA adapter has a straight body. This Pasternack SMA to SMA coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. This commercial grade RF adapter has a 0.6-inch length, 0.69-inch width, and 0.05 lbs weight. The PE910103 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our SMA reverse polarity female to SMA reverse polarity female radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This commercial grade RF adapter has an operating temperature range of -65 to 165 degrees C. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of reverse polarity SMA to reverse polarity SMA radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 6 GHz RF adapter that meets your requirements. |
| 61 | |
| PEWAT1010-3 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-15, Attenuation, Typical: 3 dB, Flange Size: UG-385/U, VSWR: 1.15:1, Minimum Frequency: 50 GHz, Maximum Frequency: 75 GHz, Maximum Power: 2 W. WR-15 Waveguide Fixed Attenuator, 3 dB, from 50 GHz to 75 GHz, UG-385/U Round Cover Flange, 2W Power., WR-15 Pasternack waveguide fixed attenuator PEWAT1010-3 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-15 gold-plated waveguide attenuators function up to 75 GHz maximum frequency rating. This 50 GHz to 75 GHz fixed waveguide attenuator PEWAT1010-3 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-15 with aluminum round cover flanges from Pasternack has a high-quality rating of 3 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 50 GHz to 75 GHz 3 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-385/U gold plated flanged WR-15 waveguide fixed attenuators around the globe. PEWAT1010-3 medium power waveguide fixed attenuator at 75 GHz max frequency and 50 GHz minimum frequency is able to achieve amazing RF performance with 2 watts of peak input power. These 2W WR-15 waveguide attenuators at 3 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-15 waveguide gold plated fixed attenuator that operates in the 50 GHz to 75 GHz range is 0.148 inches in width. 0.148 inch wide 2W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 75 GHz 0.148 by 2-inch gold-plated waveguide 3 dB attenuators that have round cover UG-385/U flanges. Precise CAD drawings are accessible for these WR-15 3 dB PEWAT1010-3 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 2W 0.148 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 2 watt 3 dB attenuation WR-15 fixed attenuator at 50 GHz to 75 GHz. |
| 1 | ||
| PEWAT1010-30 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-15, Attenuation, Typical: 30 dB, Flange Size: UG-385/U, VSWR: 1.15:1, Minimum Frequency: 50 GHz, Maximum Frequency: 75 GHz, Maximum Power: 2 W. WR-15 Waveguide Fixed Attenuator, 30 dB, from 50 GHz to 75 GHz, UG-385/U Round Cover Flange, 2W Power., WR-15 Pasternack waveguide fixed attenuator PEWAT1010-30 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-15 gold-plated waveguide attenuators function up to 75 GHz maximum frequency rating. This 50 GHz to 75 GHz fixed waveguide attenuator PEWAT1010-30 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-15 with aluminum round cover flanges from Pasternack has a high-quality rating of 30 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 50 GHz to 75 GHz 30 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-385/U gold plated flanged WR-15 waveguide fixed attenuators around the globe. PEWAT1010-30 medium power waveguide fixed attenuator at 75 GHz max frequency and 50 GHz minimum frequency is able to achieve amazing RF performance with 2 watts of peak input power. These 2W WR-15 waveguide attenuators at 30 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-15 waveguide gold plated fixed attenuator that operates in the 50 GHz to 75 GHz range is 0.148 inches in width. 0.148 inch wide 2W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 75 GHz 0.148 by 2-inch gold-plated waveguide 30 dB attenuators that have round cover UG-385/U flanges. Precise CAD drawings are accessible for these WR-15 30 dB PEWAT1010-30 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 2W 0.148 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 2 watt 30 dB attenuation WR-15 fixed attenuator at 50 GHz to 75 GHz. |
| 1 | ||
| PE3C10103-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to N Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-18 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-18 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10103-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to N Female Bulkhead Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-24 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-24 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10103-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to N Female Bulkhead Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-6 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-6 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10103 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 2.92mm Male to N Female Bulkhead Cable Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. | 0 | |||
| PE3C10103-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 2.92mm Male to N Female Bulkhead Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-9 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-9 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10103-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to N Female Bulkhead Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10103-12 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N jack cable assembly PE3C10103-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10103-12 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | T1510103000-000 | TE Connectivity | H10B-AD-LB Hood & Base Connector Product Type: Base Housing Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1510103000-000 | Internal Number: T1510103000-000 | TE Connectivity RoHS : Compliant |
| 4 | |
 Teledyne HiRel | M38510/10301B2A | Teledyne HiRel | VOLT. COMPARATOR, DIFFERENTIAL RoHS : Not Compliant | 0 | ||
M38510/10304BCA | Teledyne HiRel | VOLT. COMPARATOR/BUFFER, PRECISION RoHS : Not Compliant | 0 | |||
M38510/10103BHA | Teledyne HiRel | OP AMP, GENERAL PURPOSE RoHS : Not Compliant | 0 | |||
M38510/10103BPA | Teledyne HiRel | OP AMP, GENERAL PURPOSE RoHS : Not Compliant | 0 | |||
| M38510/10301BCA | Teledyne HiRel | VOLT. COMPARATOR, DIFFERENTIAL RoHS : Not Compliant | 0 | |||
| M38510/10103BGA | Teledyne HiRel | OP AMP, GENERAL PURPOSE RoHS : Not Compliant | 0 | |||
| M38510/10103B2A | Teledyne HiRel | OP AMP, GENERAL PURPOSE RoHS : Not Compliant | 0 | |||
M38510/10305BFA | Teledyne HiRel | VOLT. COMPARATOR, DUAL RoHS : Not Compliant | 0 | |||
| M38510/10304B2A | Teledyne HiRel | VOLT. COMPARATOR/BUFFER, PRECISION RoHS : Not Compliant | 0 | |||
| M38510/10301BGA | Teledyne HiRel | VOLT. COMPARATOR, DIFFERENTIAL RoHS : Not Compliant | 0 | |||
| M38510/10301BHA | Teledyne HiRel | VOLT. COMPARATOR, DIFFERENTIAL RoHS : Not Compliant | 0 | |||
| M38510/10103BCA | Teledyne HiRel | OP AMP, GENERAL PURPOSE RoHS : Not Compliant | 0 | |||
| M38510/10304BGA | Teledyne HiRel | VOLT. COMPARATOR/BUFFER, PRECISION RoHS : Not Compliant | 0 | |||
M38510/10304BHA | Teledyne HiRel | VOLT. COMPARATOR/BUFFER, PRECISION RoHS : Not Compliant | 0 | |||
| M38510/10304BPA | Teledyne HiRel | VOLT. COMPARATOR/BUFFER, PRECISION RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | TRCR1210-103MT | VENKEL LTD | Trimmable CR;1210;10K;�20% RoHS : Compliant | 0 | ||
 Vyrian | 14910A0BHSX10103KA | Vishay Intertechnologies | Potentiometer, Cermet, 1W, 10000ohm, 10% +/-Tol, 150ppm/Cel, 1 Turn(s) RoHS : Compliant | 18,413 | ||
| CAY10-103J4AS | Bourns Inc | Array/Network Resistor, Isolated, Metal Glaze/thick Film, 10000ohm, 50V, 5% +/-Tol, 250ppm/Cel, Surface Mount, 0408 RoHS : Unknown | 14,370 | |||
| DSPIC30F1010-30I/SP | Microchip Technology Inc | 16-Bit Size, 0-Ext Bit, 15MHz, CMOS, PDIP28 RoHS : Compliant | 12,723 | |||
| 2153101031 | Molex | Cable Assembly RoHS : Compliant | 12,523 | |||
| 10-10-1033 | Molex | Rectangular Power Connector, 3 Contact(s), Female, Solder Terminal, Plug RoHS : Compliant | 11,404 | |||
| 2160101031 | Molex | Cable Assembly RoHS : Compliant | 10,791 | |||
| M38510/10304BCA | National Semiconductor Corporation | Comparator, 1 Func, 4000uV Offset-Max, 200ns Response Time, BIPolar, CDIP14 | 8,969 | |||
| 5961-01-039-0333 | Texas Instruments | Silicon Controlled Rectifier, 12A I(T), 50V V(DRM) RoHS : Not Compliant | 8,067 | |||
JM38510/10103BPA | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar RoHS : Not Compliant | 7,577 | |||
| M38510/10307SHA | Analog Devices Inc | Comparator, 2 Func, 2000uV Offset-Max, CDFP10 RoHS : Not Compliant | 5,335 | |||
JM38510/10304BGA | Texas Instruments | Comparator, 1 Func, 3000uV Offset-Max, 640ns Response Time, BIPolar, MBCY8 RoHS : Compliant | 5,163 | |||
| JM38510/10306BCA | Texas Instruments | Comparator, 2 Func, 7000uV Offset-Max, 80ns Response Time, BIPolar, CDIP14 | 4,604 | |||
| JM38510/10103SPA | Texas Instruments | Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, CDIP8 | 3,451 | |||
| JM38510/10304BGX | STMicroelectronics | 704 | ||||
| R7F7010103AFP | Renesas Electronics Corporation | Microcontroller, 32-Bit, FLASH, RH850G3K CPU, 80MHz, CMOS, PQFP48 | 425 | |||
 Waytek, Inc. | 10103MT | Hillsdale Terminal & Tool Inc | Non-Insulated 16-14 Ga, Ring Terminal, 3/8" Stud, Reel (1,000 pcs = 1 Reel) |
| 2,000 | |
| 10103 | Hillsdale Terminal & Tool Inc | Uninsulated Ring Terminal 16-14 Gauge, 3/8" Stud |
| 714 | ||
 Win Source Electronics | 10103594-0001LF | Amphenol FCi | CONN RCPT STD MICRO USB TYPE B RoHS : Compliant |
| 21,450 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼ 
English
Chinese
German
Japanese
Russian
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand