| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty.
BuyNow |
Braemac Americas-Symmetry | SISPM1040-3166-L3-NA
| Lantronix Inc | Layer 3 Managed Hardened PoE+ Switch, (16) 10/100/1000Base-T PoE+, (4) 100/1000 SFP, (2) 1G/10G SFP+, with -NA power cord | | 1
 |
ASPI-104S-150N-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
ASPIAIG-F1040-6R5M-T
 | Abracon Corporation |
RoHS : Compliant | | 0
|
S4120-1048-BR
| Lantronix Inc | 10G BASE-T TO 10GE FIBER CONVERTER with BR power supply | | 0
|
ASPI-104S-101M-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
ASPIAIG-F1040-820M-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
TMCM-110-42-232
| Analog Devices Inc | 1-axis Controller/Driver, 1.1A | | 0
|
ADCC-S05R5SA104XB
| Abracon Corporation |
RoHS : Compliant | | 0
|
ABM10-48.000MHZ-D30-T3
 | Abracon Corporation | CRYSTAL 48.0000MHZ 10PF SMD
RoHS : Compliant | | 0
|
GGS0.510.4G.16G.E
| Grinn Global | (Grinn-GenioSom-510) | | 0
|
ASPIAIG-F1040-3R0M-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
AIUR-10-470K
 | Abracon Corporation |
RoHS : Compliant | | 0
|
ASPI-1040HI-R47M-T05
 | Abracon Corporation |
RoHS : Compliant | | 0
|
ASPI-104S-121M-T
| Abracon Corporation |
RoHS : Compliant | | 0
|
ASPI-2410-4R7M-T2
 | Abracon Corporation |
RoHS : Compliant | | 0
|
DB Roberts | 18551-04-2
| HeliCoil | | 1 : $110.142
11 : $110.142
|
| 11
|
104
| Essentra Components | | | 0
 |
E5-1-041-041
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
E5-1-041-040
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
53-10-406-24
| Southco | These screws and captive screws provide an attractive polished finish and ample shaft length to mate with threaded receptacle on frame throughout a range of panel thicknesses. They are available with spring ejection to retract the screw body when threads | | 0
|
57101-04005
| Avdel | NEOSPEED RIV 532 MH AL EXT L | | 0
|
E3-104-010
| Southco | E3-104-010 | | 0
|
E3-104-0506
| Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | | 0
|
E5-1-041-100
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
E5-1-191-041
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
E5-2-051-041
| Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | | 0
|
76003-20104
| Avdel | VACUUM SHUT-OFF NOZZLE | | 0
|
76003-20104
| Pop Rivets | VACUUM SHUT-OFF NOZZLE | | 0
|
110400030E
| Essentra Components | | | 0
|
104003300005
| Essentra Components | | | 0
|
Pasternack Enterprises US | PE3C10420
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm. Fire Rated TNC Male Right Angle to TNC Male Right Angle Low Loss Cable Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male right angle to TNC male right angle low loss cable using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male right angle to TNC male right angle low loss cable using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a TNC cable connection on one end and right angle a TNC cable connection on the other. Our low loss right angle a TNC to right angle a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10420 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10420 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10420 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. | | 91
|
PEWCA1049
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-137, Coax Connector Impedance: 50 Ohm, Coax Connector Series: N, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 5.85 GHz, Maximum Frequency: 8.2 GHz. WR-137 CMR-137 Flange to Type N Female Waveguide to Coax Adapter, 5.85 GHz to 8.2 GHz, C Band, Aluminum, Paint. PEWCA1049 WR-137 waveguide to coax adapter is also known as a WR-137 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR137 to N type connector and has a female gender. Our WR 137 to type N female waveguide adapter transition has a right angle design and has a CMR-137 flange. Pasternack right angle WR-137 to type N waveguide to coaxial cable transition / adapter has a minimum frequency of 5.85 GHz and a maximum frequency of 8.2 GHz. WR-137 waveguide to type N transition adapter to coax PEWCA1049 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-137 waveguide adapter transition with N type interface can ship worldwide the same day that it is purchased as with our other available RF parts. | 1 : $1,150.0
5 : $1,104.0
10 : $1,058.0
|
| 60
|
PE3C10410-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm. Fire Rated 7/16 DIN Male to 7/16 DIN Male Low Loss Cable Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 7/16 DIN male to 7/16 DIN male low loss cable using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated 7/16 DIN male to 7/16 DIN male low loss cable using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low loss a 7/16 DIN to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10410-48 can also be known as a low loss 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10410-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C10410-48 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low loss RF cable assembly as per your requirements. | 1 : $125.99
25 : $120.95
50 : $117.17
100 : $114.65
|
| 19
|
PE3C10412-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated BNC Male to BNC Male Low Loss Cable 48 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated BNC male to BNC male low loss cable 48 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated BNC male to BNC male low loss cable 48 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10412-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10412-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. BNC plug to BNC plug cable assembly PE3C10412-48 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. | 1 : $149.99
25 : $143.99
50 : $139.49
100 : $136.49
|
| 10
|
PE3C0104LF
| Pasternack Enterprises | | | 0
|
PE3C10409-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low Loss Cable 24 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low loss cable 24 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated 4.3-10 male to 4.3-10 male low loss cable 24 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low loss a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10409-24 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10409-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10409-24 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements. | 1 : $131.99
25 : $126.71
50 : $122.75
100 : $120.11
|
| 0
|
PE3C1040LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. HN Male to HN Male Right Angle Cable Using RG393 Coax, LF Solder, RoHS. PE3C1040LF is a HN male to HN male right angle cable using RG393 coax. This Pasternack HN male to HN male right angle cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm HN for connector 2. HN to HN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN to male HN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1040LF HN male to HN male right angle cable assembly is constructed with RG393 coax. | | 0
|
PE3C10418-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated TNC Male to TNC Male Low Loss Cable 60 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male to TNC male low loss cable 60 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male to TNC male low loss cable 60 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10418-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10418-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10418-60 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. | 1 : $153.99
25 : $147.83
50 : $143.21
100 : $140.13
|
| 0
|
PE3C10443-6
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Female to 1.85mm Female Bulkhead Cable 6 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 1.85mm female to 1.85mm female bulkhead cable 6 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm female to 1.85mm female bulkhead cable 6 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm bulkhead cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10443-6 can also be known as a 1.85mm jack to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. Our 1.85mm female to bulkhead 1.85mm female cable has a maximum VSWR of 1.4:1. 1.85mm jack to 1.85mm jack cable assembly PE3C10443-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10443-6 can also be used in the other direction and will be a 1.85mm female bulkhead to 1.85mm female cable assembly if the opposite connectivity is required. 1.85mm jack to 1.85mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm RF cable assembly as per your requirements. | 1 : $415.99
10 : $407.67
25 : $399.35
100 : $391.03
|
| 0
|
PE3C10454-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Female to 2.92mm Female Bulkhead Cable 24 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female to 2.92mm female bulkhead cable 24 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm female bulkhead cable 24 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10454-24 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm female to bulkhead 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10454-24 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10454-24 can also be used in the other direction and will be a 2.92mm female bulkhead to 2.92mm female cable assembly if the opposite connectivity is required. 2.92mm jack to 2.92mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. | 1 : $489.99
10 : $480.19
25 : $470.39
100 : $460.59
|
| 0
|
PE3W10453/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to TNC Female Cable Using LMR-400 Coax with HeatShrink. PE3W10453/HS is a reverse polarity TNC male to TNC female cable using LMR-400 coax. This Pasternack reverse polarity TNC male to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10453/HS TNC reverse polarity male to TNC female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W10466
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMB Jack to SMA Female Bulkhead Cable Using LMR-100 Coax. PE3W10466 is a SMB jack to SMA female bulkhead cable using LMR-100A coax. This Pasternack SMB jack to SMA female bulkhead cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. Our jack SMB to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10466 SMB jack to SMA female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W20104
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to Slide-On BMA Jack Bulkhead Cable Using PE-SR405FL Coax. PE3W20104 is a SMA male to BMA jack bulkhead cable using PE-SR405FL coax. This Pasternack SMA male to BMA jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. Our male SMA to jack BMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20104 SMA male to BMA jack bulkhead cable assembly is constructed with PE-SR405FL coax. | | 0
|
PE3W21040
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. 4.3-10 Male to 7/16 DIN Male Right Angle Cable Using 1/4 inch Superflexible Coax. PE3W21040 is a 4.3-10 male to 7/16 DIN male right angle cable using 1/4" Superflexible coax. This Pasternack 4.3-10 male to 7/16 DIN male right angle cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 4.3-10 to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 4.3-10 to male 7/16 DIN right angle cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W21040 4.3-10 male to 7/16 DIN male right angle cable assembly is constructed with 1/4" Superflexible coax. | | 0
|
PE44104
| Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: MHV, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Interface Type 1: RG174, Interface Type 2: RG316, Interface Type 3: RG188. MHV Female Connector Clamp/Solder Attachment For RG174, RG316, RG188. PE44104 MHV female coaxial connector has an interface type of RG174, RG316, RG188 and a 50 Ohm impedance. Pasternack MHV female connector uses shield/contact clamp/solder as an attachment method. The Pasternack MHV coaxial connector has a brass body with nickel plating. This MHV female coaxial RF connector is REACH compliant. This Pasternack female MHV connector will ship the same day as purchased. Our MHV female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom MHV connector cable assemblies that will ship the same day as well. | 1 : $49.39
25 : $46.92
50 : $44.45
100 : $42.48
|
| 0
|
Wuhan P&S | BFC233920104
| Vishay Intertechnologies | 0.1uF,��20%,310V(AC),630V(DC),Suppression Film Capacitors
RoHS : Compliant | 1 : $0.97
100 : $0.39
500 : $0.36
1,000 : $0.35
|
| 96,000
|
BFC233921104
| Vishay Intertechnologies | 0.1 ? F thin film capacitor��MKP 339 100NF ��20% 310VAC X2
RoHS : Compliant | 1 : $1.82
100 : $0.61
500 : $0.56
1,000 : $0.55
|
| 42,500
|
F339X131048MFP2B0
| Vishay Intertechnologies | Interference Suppression Film Capacitor - Class X1 Radial MKP 480 VAC, 10000pF, ��20%
RoHS : Compliant | 1 : $0.48
100 : $0.17
500 : $0.13
1,000 : $0.12
|
| 10,000
|
Korean ▼ 
English
Chinese
German
Japanese
Russian
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand