| 전자부품 데이터시트 검색엔진 |
|
1085DT-R 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
![]() TME | 1108534-1 | TE Connectivity | Enclosure for connectors: HDC |
| 55 | |
| 55501085 | Lapp Group | Straight terminal connector; Thread: metric,outside; IP68,IP69 |
| 2 | ||
| 108 516 E | RUKO GmbH | Drill: for metal; core; Ø: 16mm; L: 88mm; weldon; 3/4" |
| 0 | ||
| 108 520 E | RUKO GmbH | Drill: for metal; core; Ø: 20mm; L: 88mm; weldon; 3/4" |
| 0 | ||
| 108 529 F | RUKO GmbH | Drill: for metal; core; Ø: 29mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 533 F | RUKO GmbH | Drill: for metal; core; Ø: 33mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 536 | RUKO GmbH | Drill: for metal; core; Ø: 36mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 540 | RUKO GmbH | Drill: for metal; core; Ø: 40mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 557 E | RUKO GmbH | Drill: for metal; core; Ø: 57mm; L: 88mm; weldon; 3/4" |
| 0 | ||
| 1085 SL001 | Alpha Wire | Wire; Alpha Essential C&C; 25x16AWG; unshielded; 600V; 305m; Cu |
| 0 | ||
| 1891085 | Phoenix Contact | Connector: PCB terminal block; power supply; 4A; 250V; PIN: 4 RoHS : Compliant |
| 0 | ||
| 281 085 E | RUKO GmbH | Drill: for metal; Ø: 8.5mm; L: 117mm; Working part len: 75mm; C; H8 |
| 0 | ||
| 31-085 | NEO TOOLS | Cutters; for cutting iron, copper or aluminium sheet metal |
| 0 | ||
| 1010850075 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M12; PIN: 4; male; shielded,straight; plug; IE RoHS : Compliant |
| 0 | ||
| 1010850200 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; M12; PIN: 4; shielded,straight; plug; IP67 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | LD1085D2M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator, 6.3V to 30V, 1.3V drop, 3.3V/3A out, TO-263AA-3 - Tape and Reel (Alt: LD1085D2M33R) RoHS : Compliant |
| 11,000 | |
| 26-48-1085 | Molex | Pin Header, 8 Contacts, 1 Row, 3.96mm, Matte Tin, 5A, Straight, Partially Shrouded, Brass, THT, PET - Bulk (Alt: 0026481085) RoHS : Compliant |
| 10,800 | ||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator, 3V to 30V, 1.3V drop, 1.8V to 28V/3A out, TO-263-3 - Tape and Reel (Alt: LD1085D2T-R) RoHS : Compliant | 2,000 | |||
| ATS-PCBT1085 | Advanced Thermal Solutions Inc | BOARD LEVEL HEAT SINK - Bulk (Alt: ATS-PCBT1085) RoHS : Compliant |
| 1,000 | ||
| TMS-108-58-L-S | Samtec Inc | Pin Header, Board-to-Board, 5 A, 1 Rows, 8 Contacts, Through Hole, TMS Series, Unshrouded - Rail/Tube (Alt: TMS-108-58-L-S) RoHS : Compliant |
| 0 | ||
| DW-09-14-L-D-1085 | Samtec Inc | - Bulk (Alt: DW-09-14-L-D-1085) RoHS : Compliant |
| 0 | ||
| DW-10-14-T-T-1085 | Samtec Inc | Board Stackers & Spacers, Pin Header, 27.56 mm, 30 Contacts, Solder, 3 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-10-14-T-T-1085) RoHS : Compliant |
| 0 | ||
| AWHH001611085N6H00 | Pulse Electronics Corporation | - Tape and Reel (Alt: AWHH001611085N6H00) RoHS : Compliant |
| 0 | ||
| TMS-108-54-F-S | Samtec Inc | - Rail/Tube (Alt: TMS-108-54-F-S) RoHS : Compliant |
| 0 | ||
| 10127721-085GTLF | Amphenol Corporation | - Tape and Reel (Alt: 10127721-085GTLF) RoHS : Not Compliant |
| 0 | ||
| 2810850000 | Weidmüller Interface GmbH & Co. KG | ZQV 4N/20 BL - Bulk (Alt: 2810850000) RoHS : Not Compliant |
| 0 | ||
| EB1085-10-000 | Amphenol Corporation | B43724A4828M608 - Bulk (Alt: EB1085-10-000) RoHS : Compliant |
| 0 | ||
| FFSD-25-D-10.85-01-N | Samtec Inc | Ribbon Cable, IDC Receptacle to IDC Receptacle, 50 Ways, 10.85 ", 275.6 mm, 1.27 mm - Bulk (Alt: FFSD-25-D-10.85-01-N) RoHS : Compliant |
| 0 | ||
| FTR-108-51-S-D | Samtec Inc | - Rail/Tube (Alt: FTR-108-51-S-D) RoHS : Compliant |
| 0 | ||
| FTR-108-52-T-S-P | Samtec Inc | - Rail/Tube (Alt: FTR-108-52-T-S-P) RoHS : Compliant |
| 0 | ||
![]() Newark | FMCN1085 | Fairview Microwave Inc | Rf/Coaxial Connector, Sma Coaxial; |Fairview Microwave FMCN1085 RoHS : Not Compliant |
| 2,266 | |
| DW-08-14-G-D-1085 | Samtec Inc | Conn Stack Brd, 2.54Mm, 16Pos, Hdr; |Samtec, Inc. DW-08-14-G-D-1085 RoHS : Compliant |
| 201 | ||
| MTMS-108-51-T-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. MTMS-108-51-T-S-185 RoHS : Compliant |
| 187 | ||
| TMS-108-58-L-S | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. TMS-108-58-L-S RoHS : Compliant |
| 170 | ||
| DW-09-14-L-D-1085 | Samtec Inc | Conn Stack Brd, 2.54Mm, 18Pos, Hdr; |Samtec, Inc. DW-09-14-L-D-1085 RoHS : Compliant |
| 167 | ||
| DW-10-14-T-T-1085 | Samtec Inc | Conn Stack Brd, 2.54Mm, 30Pos, Hdr; |Samtec, Inc. DW-10-14-T-T-1085 RoHS : Compliant |
| 148 | ||
| HW-16-14-S-D-1085-130 | Samtec Inc | Conn Stack Brd, 2.54Mm, 32Pos, Hdr; |Samtec, Inc. HW-16-14-S-D-1085-130 RoHS : Compliant |
| 145 | ||
| 1085 | Weller Hand Tools GmbH | Baffle Kit; |Weller (Apex Tool Group) 1085 RoHS : Not Compliant |
| 144 | ||
| DS1085LZ-5+ | Analog Devices Inc | Freq Synthesizer, 48.58Mhz, Nsoic-8; Available Until Stocks Are Exhausted |Analog Devices, Inc. DS1085LZ-5+ RoHS : Compliant |
| 100 | ||
| PTT-11085-C | BUD Industries Inc | Plastic Enclosure, Junction Box, Abs; |Bud Industries PTT-11085-C RoHS : Compliant |
| 42 | ||
| 1671085 | Phoenix Contact | Sensor Cable, 3Pos, M8 R/A Socket, 5M; |Phoenix Contact 1671085 RoHS : Compliant |
| 7 | ||
| FMWCP1085S-30 | Fairview Microwave Inc | 30 Db Wr-75 Waveguide Crossguide Coupler; |Fairview Microwave FMWCP1085S-30 RoHS : Not Compliant |
| 7 | ||
| FMWCP1085N-40 | Fairview Microwave Inc | 40 Db Wr-75 Waveguide Crossguide Coupler; |Fairview Microwave FMWCP1085N-40 RoHS : Not Compliant |
| 1 | ||
| 1085 | Adafruit Industries | Ads1115 16-Bit Adc - 4 Channel With Programmable Gain Amplifier - Stemma Qt/Qwiic Rohs Compliant: Yes |Adafruit 1085 RoHS : Compliant |
| 0 | ||
| 1085 | Pelican Products Inc | 1085 Hardback Case; |Pelican Products 1085 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | DS1085Z-50+ | Analog Devices Inc | EconOscillator Frequency Synth RoHS : Compliant |
| 6,314 | |
| DS1085LZ-5+ | Analog Devices Inc | 3.3V EconOscillator Frequency RoHS : Compliant |
| 5,979 | ||
| DS1085LZ-25+ | Analog Devices Inc | 3.3V EconOscillator Frequency RoHS : Compliant |
| 5,902 | ||
| LT1085CM-3.6#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 2,410 | ||
| DS1085Z-25+ | Analog Devices Inc | EconOscillator Frequency Synth RoHS : Compliant |
| 2,183 | ||
| LT1085IT-5#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 1,311 | ||
| LT1085CT#PBF | Analog Devices Inc | 7.5A, 5A, 3A L Drop Pos Adj Re RoHS : Compliant |
| 918 | ||
| LT1085CT-3.3#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 55 | ||
| 108537-HMC499LC4 | Analog Devices Inc | HMC499LC4 Evaluation PCB |
| 22 | ||
| 108537-HMC498LC4 | Analog Devices Inc | HMC498LC4 Evaluation PCB |
| 19 | ||
| LT1085IT-12#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 11 | ||
| LT1085IM-3.6#TRPBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 0 | ||
| LT1085CM-3.3#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 0 | ||
| LT1085CM-3.6#TRPBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 0 | ||
| MAX1085BCSA+T | Analog Devices Inc | 400ksps/300ksps, Single-Supply RoHS : Compliant |
| 0 | ||
![]() RS | 97-3101A-14S(621)(0850 | Amphenol Industrial Operations | CABLE RECEPTACLE SOCKET, SOLID BACKSHELL 14S-55 C, MIL-5015 TYPE, 97 SERIES |
| 638 | |
| 97-3102A-16S(621)(0850) | Amphenol Industrial Operations | BOX RECEPTACLE SOLID BACKSHELL 16S, 13AMIL-5015 TYPE, 97 SERIES |
| 181 | ||
| 1085219 (FL SWITCH 1116N) | Phoenix Contact | UNMANAGED SWITCH 16 X RJ45 PORTS, 10/100/1000 MBPS |
| 65 | ||
| 97-3106A-16(621)(0850) | Amphenol Industrial Operations | PLUG CONNECTOR, STRAIGHT, SOLID BACKSHELL 16 -55C, MIL-5015 TYPE, 97 SERIES |
| 41 | ||
| 1.15.108.551/0000 | RAFI GmbH & Co Kg | PUSHBUTTON SWITCH, LUMOTAST 75,1NC+1NO, RND, LATCHING,16.2MM, LED,4A,250V, IP40,SLDR RoHS : Compliant |
| 8 | ||
| 56108 (56108-5) | Klein Tools Inc | POLY PULL LINE WITH ORANGE TRACER 500-FEET |
| 3 | ||
| 1085488 | Phoenix Contact | PANEL-MOUNTING ACCESSORY FOR 5/8 PORT SWITCHES, FL PANEL ADAPTER 22.5 RoHS : Compliant |
| 2 | ||
| 601.0853.002 | Altech Corporation | LIMIT SWITCH, REMOTE RESET, SGS-SA2Z W F3 24V, 24V RESET |
| 2 | ||
| ICN1P32N35I (913710852301) | Advance by Signify | ELECTRONIC BALLAST, ICN1P32N35I, T8 1 LAMP INSTANT START 120-277 VOLT |
| 2 | ||
| R021M10852 | Bosch Rexroth | LINEAR GUIDE BALL RAIL SZ 15, LENGTH = 460MM, N ACCURACY, TOP MOUNT, R160510431 |
| 1 | ||
| ALBP1010 (8592383) | FIBOX | 10 INCH WIDE X 10 INCH HIGH ALUMINIUM PANEL FOR 10 INCH WIDE X 10 INCH HIGH ENCL |
| 1 | ||
| AR1085CHFSSL (8561664) | FIBOX | PC ENCLOSURE, 8" WIDE X 5" DEEP X 10" HIGH, HINGED FLAT COVER, SS LOCKABLE LATCH |
| 1 | ||
| 97-3102A-36(621)(0850) | Amphenol Industrial Operations | BOX RECEPTACLE SOLID BACKSHELL, 36 -55C, +125MIL-5015 TYPE, 97 SERIES |
| 1 | ||
| 1085 | Apex Tool Group LLC | WELLER, 3-PIECE BAFFLE KIT FOR THE 6970, 1095 HEAT GUNS |
| 0 | ||
| 1085 | Adafruit Industries | ADS1115 16-BIT ADC - 4 CHANNEL WITH PROGRAMMABLE GAIN AMPLIFIER |
| 0 | ||
![]() STMicroelectronics | LD1085D2M33R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 9,814 | |
LD1085D2M-R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 6,710 | ||
LD1085V50![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 6,543 | ||
LD1085D2T33R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 5,478 | ||
LD1085V![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 2,201 | ||
LD1085D2M18R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 1,660 | ||
LD1085D2T-R![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 614 | ||
LD1085P![]() | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 15 | ||
| STA1085POA3TR | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EOA | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EOATR | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085POA | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EUA3 | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | GC1610-85 | Microchip Technology Inc | Si TVAR Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | ||
TC1108-5.0VDBTR![]() | Microchip Technology Inc | 300mA LDO, SOT-223, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070 | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070T | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| OH-2010-DEX-1085-10M0000000 | Microchip Technology Inc | OH-2010-DEX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
| OH-1710-DAE-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAE-1085-10M0000000, Projected EOL: 2051-08-02 - Contact for Pricing | 0 | |||
| OH-1710-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
| OH-1730-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1730-DAX-1085-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
| OX-1740-BEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-BEE-1085-10M0000000, Projected EOL: 2051-03-16 - Contact for Pricing RoHS : Unknown | 0 | |||
| OX-1740-DEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-DEE-1085-10M0000000, Projected EOL: 2051-08-12 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Bisco Industries | 10850-SS-1032-7 | Amatom Electronic Hardware | 300 | |||
| 1110858 | Unbrako Group | 250 | ||||
| 5710-85-16 | Seastrom Mfg | 153 | ||||
| FT1085-8-1-2 | Fastener Technology Corp | 150 | ||||
| 10854-1 | MISC. SPACERS/STANDOFFS/HANDLES | 108 | ||||
| 10856-A-0832-2 | Amatom Electronic Hardware | 25 | ||||
| 10858-SS-1032-0 | Amatom Electronic Hardware | 24 | ||||
| 10854-A-1032-0 | Amatom Electronic Hardware | 12 | ||||
| 10857 | MISC. CHEMICALS | 12 | ||||
| 10856-B-1032-4 | Amatom Electronic Hardware | 8 | ||||
| 10856-A-1032-0 | Amatom Electronic Hardware | 7 | ||||
| 1110-8599-6218 | MISC. INDUSTRIAL CONNECTORS | 7 | ||||
| 10859-SS-1032-6B | Amatom Electronic Hardware | 6 | ||||
| MS20253-1-085 | MS Pins | 5 | ||||
| 10853-A-1032-0 | Amatom Electronic Hardware | 2 | ||||
![]() Rochester Electronics | DS1085LZ-5+ | Analog Devices Inc | DS1085 - 3.3V EconOscillator Frequency Synthesizer RoHS : Compliant |
| 5,739 | |
| LT1085CT-5#PBF | Analog Devices Inc | IC VOLT REG Fixed 1 REG 5V 3A TO-220-3 Tube RoHS : Compliant |
| 229 | ||
| LT1085CT-12#PBF | Analog Devices Inc | IC VOLT REG Fixed 1 REG 12V 3A TO-220-3 Tube RoHS : Compliant |
| 2 | ||
TPS61085TPWR![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP T/R RoHS : Compliant |
| 12,984 | ||
LM1085ISX-3.3![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 3A TO-263-4 T/R RoHS : Not Compliant |
| 3,597 | ||
TPS61085PW![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP Tube RoHS : Compliant |
| 43 | ||
LT1085CT-5#PBF![]() | Linear Technology | IC VOLT REG Fixed 1 REG 5V 3A TO-220-3 Tube RoHS : Compliant |
| 43 | ||
LT1085IT![]() | Linear Technology | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 9 | ||
DS1085LZ-25+![]() | Maxim Integrated Products | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant |
| 5,067 | ||
DS1085Z-50+![]() | Maxim Integrated Products | Clock Generator, 133MHz, CMOS, PDSO8 RoHS : Compliant |
| 5,520 | ||
| LM1085IS-12/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 12V 3A TO-263-4 Tube RoHS : Compliant |
| 214 | ||
| LM1085ISX-3.3 | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 3.3V 3A TO-263-4 T/R RoHS : Not Compliant |
| 2,195 | ||
| LM1085IT-12/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 12V 3A TO-220-3 Tube RoHS : Compliant |
| 118 | ||
| RAA2108502GLG#AG0 | Renesas Electronics Corporation | DC/DC CONVERTER 1 OUT 600mV to 5V 50A 250W 58-SMD Tray RoHS : Compliant |
| 1,435 | ||
LD1085D2T33R![]() | STMicroelectronics | IC VOLT REG Fixed 1 REG 3.3V 3A TO-263-3 T/R RoHS : Compliant |
| 3,000 | ||
![]() Sager | TMS-108-58-L-S | Samtec Inc | Headers & Wire Housings Through-hole Micro Header, 0.050 x 0.100 Pitch RoHS : Compliant |
| 170 | |
| DW-09-14-L-D-1085 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 167 | ||
| DW-10-14-T-T-1085 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 148 | ||
| 1085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| TMS-108-54-F-S | Samtec Inc | Headers & Wire Housings Through-hole Micro Header, 0.050 x 0.100 Pitch RoHS : Compliant |
| 0 | ||
| 0982671085 | Molex | FFC / FPC Jumper Cables PREMO-FLEX 1.00 JMPR LGT 152 TYPEA 37CKT RoHS : Compliant | 0 | |||
| 1671085 | Phoenix Contact | Sensor Cables / Actuator Cables SENSOR CABLE RoHS : Compliant |
| 0 | ||
| 1300061085 | Molex | Sensor Cables / Actuator Cables MC 4P MP 3' 90D 16/4 PVC SS | 0 | |||
| 1108567-1 | TE Connectivity | Heavy Duty Power Connectors HIP-K.6/16.AG.M6 OB RoHS : Compliant |
| 0 | ||
| 11108543-00 | TE Connectivity | AST4530I00069H1X9353:CTO-13000000-02 | 0 | |||
| 1201085001 | Molex | M12-4P(D)-M/M-ST/ST-0.5M-PVC | 0 | |||
| 2-2151085-2 | TE Connectivity | Crimpers / Crimping Tools OC-PA-S-FA-046F 067F-001-0092 | 0 | |||
| ESQ-108-58-L-S | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| DW-15-14-F-S-1085 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 511-91-085-13-081003 | Mill-Max Mfg Corp | Circuit Board Hardware - PCB STANDRD SOLDER TAIL PGA SOCKET | 0 | |||
![]() Ameya Holding Limited | ADM1085AKSZ-REEL7![]() | Analog Devices Inc | ADM1085AKSZ-REEL7 电压监控器, 0.56V, 用于简单序列发生器, 6针 SC-70封装 RoHS : Compliant | 2,171 | ||
LD1085D2M-R![]() | STMicroelectronics | LD1085 Series 3 A Adjustable Output Positive Voltage LDO Regulator - D2PAK RoHS : Compliant | 1,313 | |||
LM1085IS-5.0/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,305 | |||
LM1085IT-ADJ/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,050 | |||
LM1085IS-12/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,000 | |||
LM1085ISX-5.0/NOPB![]() | Texas Instruments | RoHS : Compliant | 1,000 | |||
TPS61085DGKT![]() | Texas Instruments | MSOP 8/I°/18.5V, 2A, 650KHZ, 1.2MHZ STEP-UP DC-DC CONVERTER RoHS : Compliant | 42 | |||
LM1085IT-3.3/NOPB![]() | Texas Instruments | IC: voltage regulator; LDO,fixed; 3.3V; 3A; TO220-3; THT; tube; ±4% RoHS : Compliant | 40 | |||
| DS1085LZ-25+ | Analog Devices Inc | 3.3V EconOscillator Frequency Synthesizer RoHS : Compliant | 21 | |||
| LT1085CT#PBF | Analog Devices Inc | IC: voltage regulator; LDO,adjustable; 1.25÷28.5V; 3A; TO220; THT RoHS : Compliant | 14 | |||
![]() ComSIT USA | BI20001085 | IMESA | AVAILABLE EU | 23 | ||
| 1085880000 | Weidmüller Interface GmbH & Co. KG | AVAILABLE EU RoHS : Compliant | 1,897 | |||
| BI30001085 | AVED ELECTRONICS | AVAILABLE EU | 26 | |||
![]() ComSIT USA | BUK10850DL | NXP Semiconductors | POWERMOS TRANSISTOR LOGIC LEVEL TOPFET Buffer/Inverter Based Peripheral Driver, PSSO2 RoHS : Compliant | 52,295 | ||
| LD1085D2MR | STMicroelectronics | Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 7,000 | |||
LD1085D2M18R![]() | STMicroelectronics | 3 AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 3,000 | |||
LD1085P![]() | STMicroelectronics | 3 AMP LOW DROP POSITIVE ADJUSTABLE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar RoHS : Compliant | 2,134 | |||
| ASP11085907 | Samtec Inc | Connector, Samtec ASP11085907, board-to-board, high-speed, 50 positions RoHS : Not Compliant | 1,250 | |||
| LM1085ISX33NOPB | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 745 | |||
EZ1085CMTR![]() | Semtech Corporation | 3 AMP POSITIVE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.3V Min, 5.7V Max, 1.35V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 505 | |||
| LM1085ISADJ | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 472 | |||
| LD1085V | SGS Semiconductor Ltd | 3 AMP LOW DROP POSITIVE ADJUSTABLE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar RoHS : Compliant | 350 | |||
| LM1085IT33 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 209 | |||
| LH1085 | Siemens | Electronic Component RoHS : Not Compliant | 200 | |||
| LM1085ISADJNOPB | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 154 | |||
| AZ1085S18EI | Diodes-BCD | Electronic Component RoHS : Compliant | 125 | |||
| LM1085IT12 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 109 | |||
| MRF21085 | Freescale Semiconductor | THE RF MOSFET LINE N-CHANNEL ENHANCEMENT-MODE LATERAL RF POWER MOSFET RF Power Field-Effect Transistor, 1-Element, S Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 12 | |||
![]() GLYN GmbH & Co. KG | ES51085FLW | Emerging Display Technolgies | LCD 128 x 64, FSTN positive, white LED Sitronix S | 17 | ||
![]() Interstate Connecting Components | 97-3106A-12S(621)(0850 | Amphenol Industrial Operations | SHELL |
| 1 | |
| 10127721-085GTLF | Amphenol FCi | 10127721-085GTLF-MTK 3.0 08P D | 0 | |||
| 1108567-1 | TE Connectivity | HIP-K.6/16.AG.M6 OB RoHS : Compliant |
| 0 | ||
| 11108543-00 | TE Connectivity | AST4530I00069H1X9353:CTO-13000 | 0 | |||
| 42-10851 | Conec Corporation | SAL-8S-RK4-2G3 RoHS : Compliant | 0 | |||
| 710-858NF282820BT | Glenair Inc | 0 | ||||
| C09131T1051085U | Amphenol Sine Systems | FEMALE RECEPTACLE FLANGE FRONT | 0 | |||
| 710-858M403240BT | Glenair Inc | 0 | ||||
| 97-3100A-8S(621)(0850) | Amphenol Industrial Operations | 5015 WALL MNT RECP SHL#8S |
| 0 | ||
| 97-3101A-28(621)(0850) | Amphenol Industrial Operations |
| 0 | |||
| 97-3102A-32(621)(0850) | Amphenol Industrial Operations | SHELL |
| 0 | ||
| 710-857 | Glenair Inc | GTK CONDUIT FITTING | 0 | |||
| 710-858M404040 | Glenair Inc | GTK CONDUIT FITTING | 0 | |||
| 710-859NF24162416B | Glenair Inc | S72 CONVO TUBING X2-Y TRANS A-SZ24, B-SZ16, C-SZ24, D-SZ16 | 0 | |||
| 8-2108517-1 | TE Connectivity | 2108517-2 ANTENNA WITH EVB ASS RoHS : Compliant | 0 | |||
![]() NexGen Digital | LT1085CT-3.3![]() | Linear Technology | RoHS : Not Compliant | 15 | ||
![]() PEI Genesis | C10-117931-085 | Amphenol Corporation |
| 0 | ||
| C10-123011-085 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | DW-05-14-T-D-1085 | Samtec Inc | Flexible Board Stacking Header, 0.100 Pi RoHS : Compliant |
| 166 | |
| DW-08-14-G-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 133 | ||
| MTMS-108-51-T-S-185 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-53-S-S-285 | Samtec Inc | .050 x .100 Variable Post Height Micro T RoHS : Compliant |
| 123 | ||
| HTMS-108-54-G-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 123 | ||
| MTMS-108-53-S-S-270 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| HTMS-108-53-G-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 114 | ||
| TMS-108-58-L-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 112 | ||
| MTMS-108-58-S-S-471 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 112 | ||
| DW-09-14-L-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 110 | ||
| DW-10-14-T-T-1085 | Samtec Inc | .100 Flex Stack RoHS : Compliant |
| 98 | ||
| HW-16-14-S-D-1085-130 | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 96 | ||
| DW-12-14-L-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 94 | ||
| 97-3106A20(621)(0850) | Amphenol Corporation | Connector |
| 57 | ||
| 5-2110852-0 | TE Connectivity | Connectors |
| 7 | ||
![]() Chip 1 Exchange | 12110853 | INSTOCK | 14,000 | |||
| LT1085CM | LTECH | INSTOCK | 2,414 | |||
| L1085DG | Niko Semicondutor Co Ltd | INSTOCK | 2,059 | |||
| L6410854 | LSI Corporation | INSTOCK | 1,056 | |||
| 1928301085 | Bosch Sensortec | INSTOCK | 785 | |||
| LT1085CM | INSTOCK | 531 | ||||
| LD1085D2T33R | Intel Corporation | INSTOCK | 464 | |||
TJA1085HN,118![]() | NXP Semiconductors | INSTOCK RoHS : Compliant | 365 | |||
| LT1085CT#PBF | INSTOCK | 300 | ||||
| 6043B0108501 | INSTOCK | 195 | ||||
| SR130/1085A | Advanced-Connectek Inc | INSTOCK | 146 | |||
| LM1085ISX-5.0 | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 142 | |||
| LTA-1085 | INSTOCK | 116 | ||||
| LM1085IT-ADJ | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 17 | |||
| VSMG10850 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 10 | |||
![]() Avnet Abacus | 522071085 | Molex | FFC FPC Board Connector Right Angle 1 mm 10 Contacts Receptacle EasyOn 52207 Surface Mount - Tape and Reel (Alt: 522071085) RoHS : Compliant | 4,000 | ||
| VC121085S151DP | Kyocera AVX Components | TVS Varistor 60 V 85 V 150 V 1210 3225 Metric Multilayer Varistor MLV (Alt: VC121085S151DP) RoHS : Compliant | 4,000 | |||
| 3KYY1108-554 | Grayhill Inc | CAN Keypad custom (Alt: 3KYY1108-554) RoHS : Compliant | 103 | |||
| 1108500 | Phoenix Contact | FKIC 25 4STGF508 FKIC254STGF508 (Alt: 1108500) RoHS : Compliant | 0 | |||
| D110853 | ITT Interconnect Solutions | 90 DEG BRACKET MOUNTING DADBDC DE (Alt: 110853-0000) RoHS : Not Compliant | 0 | |||
| 562108-5 | TE Connectivity | (Alt: 562108-5) RoHS : Compliant | 0 | |||
| 1108567-1 | TE Connectivity | (Alt: 1108567-1) RoHS : Compliant | 0 | |||
| CV1085-000 | TE Connectivity | (Alt: CV1085-000) RoHS : Compliant | 0 | |||
| 651085-000 | TE Connectivity | (Alt: 651085-000) RoHS : Not Compliant | 0 | |||
| 39-28-1085 | Molex | (Alt: 39281085) RoHS : Compliant | 0 | |||
| 1011-085-0405 | TE Connectivity | (Alt: 1011-085-0405) RoHS : Compliant | 0 | |||
| TMS-108-58-L-S | Samtec Inc | Pin Header BoardtoBoard 5 A 1 Rows 8 Contacts Through Hole TMS Series Unshrouded (Alt: TMS-108-58-L-S) RoHS : Compliant | 0 | |||
| FTR-108-55-L-S | Samtec Inc | Conn Unshrouded Header HDR 8 POS 127mm Solder ST SMD (Alt: FTR-108-55-L-S) RoHS : Compliant | 0 | |||
| 008261243310852 | Kyocera AVX Components | Shunt Connector 254mm pitch (Alt: 008261243310852) RoHS : Not Compliant | 0 | |||
| DW-04-14-G-D-1085 | Samtec Inc | Stacking Board Connector DW Series 8 Contacts Header 254 mm Through Hole 2 Rows (Alt: DW-04-14-G-D-1085) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10127721-085SLF | Amphenol Corporation | (Alt: 10127721-085SLF) RoHS : Compliant |
| 3,375 | |
| BPMI0011085075NK0E | Pulse Electronics Corporation | (Alt: BPMI0011085075NK0E) RoHS : Compliant |
| 1,000 | ||
| 0522071085 | Molex | FFC / FPC Board Connector, 10 Contacts, 1 Row, 1mm, Top, Tin-Bismuth Plated, SMT, Right Angle, 0.3mm (Alt: 0522071085) RoHS : Compliant | 0 | |||
| 1-2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-2) RoHS : Compliant | 0 | |||
| 10127721-085GRLF | Amphenol Corporation | (Alt: 10127721-085GRLF) RoHS : Compliant | 0 | |||
| 1-2410850-1 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-1) RoHS : Compliant | 0 | |||
| VSMA1085250 | Vishay Intertechnologies | HiPow IR Emitting Diode 850nm -e3 (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
| X1E000021085300 | Epson Electronics America Inc | (Alt: X1E000021085300) RoHS : Compliant | 0 | |||
| 095-900-10852-1 | Amphenol Corporation | (Alt: 095-900-10852-1) RoHS : Compliant |
| 0 | ||
| 301085589 | Qnity Laird | MEC FOAM LOSSY 9X6X3.17MM (Alt: 301085589) RoHS : Compliant | 0 | |||
| 2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, W/STOPPER (Alt: 2410850-2) RoHS : Compliant | 0 | |||
| 0417910852 | Molex | Pin Header, 5 Contacts, 1 Row, 3.96mm, Gold, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0417910852) RoHS : Compliant | 0 | |||
| 811085-000 | TE Connectivity | (Alt: 811085-000) RoHS : Compliant | 0 | |||
| 2-1419108-5 | TE Connectivity | (Alt: 2-1419108-5) RoHS : Compliant | 0 | |||
| 2108517-2 | TE Connectivity | Stamped Antenna, Dual Band, 2.4 GHz to 2.5 GHz, 5.15 GHz to 5.875 GHz, Surface Mount (Alt: 2108517-2) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LD1085D2M25R![]() | STMicroelectronics | LDO Regulator Pos 25V 3A 4Pin3Tab D2PAKA TR (Alt: LD1085D2M25R) RoHS : Compliant | 274,000 | ||
LD1085D2M18R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 425V to 30V 13V drop 18V3A out TO263AA3 (Alt: LD1085D2M18R) RoHS : Compliant | 105,000 | |||
LD1085D2M-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 76,000 | |||
LD1085D2M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 63V to 30V 13V drop 33V3A out TO263AA3 (Alt: LD1085D2M33R) RoHS : Compliant | 76,000 | |||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2T-R) RoHS : Compliant | 58,000 | |||
LD1085D2T33R![]() | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
| P3T1085UKAZ | NXP Semiconductors | (Alt: P3T1085UKAZ) RoHS : Compliant | 0 | |||
ZXCT1085E5TA![]() | Diodes Incorporated | Current Sensor Unidirectional 1 SOT25 5 Pins (Alt: ZXCT1085E5TA) RoHS : Compliant | 0 | |||
| STA1085EOA3TR | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA TR (Alt: STA1085EOA3TR) RoHS : Compliant | 0 | |||
| STA1085ELA3S1 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3S1) RoHS : Compliant | 0 | |||
TJA1085HN,118![]() | NXP Semiconductors | FlexRay Transceiver 4TX 4RX 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085HN,118) RoHS : Compliant | 0 | |||
TC1108-5.0VDBTR![]() | Microchip Technology Inc | LDO Regulator Pos 5V 03A 4Pin3Tab SOT223 TR (Alt: TC1108-5.0VDBTR) RoHS : Compliant | 0 | |||
| LG01-0856N1RLTR | Halo Electronics Inc | COMMON MODE CHOKE (Alt: LG01-0856N1RLTR) RoHS : Compliant | 0 | |||
| OX-1740-DEE-1085-10M0000000 | Microchip Technology Inc | (Alt: OX-1740-DEE-1085-10M0000000) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | WH-PS710-850 | Nipron Co | Peripheral cable |
| 1 | |
| WH-PP610-850 | Nipron Co | RoHS : Compliant |
| 0 | ||
| CAB.01085 | Taoglas Antenna Solutions | IPEX MHFI(U.FL) to 200mm 1.37mm Black SMA(F)BKST |
| 0 | ||
![]() Component Electronics, Inc | TMS-108-52-T-S | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | |
| VC121085S151DP | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 250 | ||
| 3-1419108-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 219 | ||
LT1085CM-3.3#TRPBF![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 54 | ||
| 10-85-0208 | IN STOCK SHIP TODAY | 50 | ||||
| AV108-59 | Alpha Industries | IN STOCK SHIP TODAY |
| 40 | ||
| AME1085DCDT-3 | AME Inc | IN STOCK SHIP TODAY |
| 40 | ||
EZ1085CM![]() | Semtech Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 30 | ||
| 0522071085 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
LT1085CM![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant | 21 | |||
| MB100H-10.855275MHZ | MMD | IN STOCK SHIP TODAY | 16 | |||
| LM1085IT-ADJ/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
LT1085CM-3.3#PBF![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 006-1085057 | NCR Corporation | IN STOCK SHIP TODAY | 7 | |||
| LM1085IS-3.3/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
![]() DB Roberts | E5-1-085-051 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | ||
| OPT2-610-8.5B | SHEREX FASTENING SO | 0 | ||||
| E5-1-085-050 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-131 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 10852 | Heyco | HCPS-18 NATURAL | 0 | |||
| E5-1-085-011 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-061 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 20571085 | Essentra Components | 44.5MM-49MM HOLE BLANKING PLUG | 0 | |||
| 167108569902 | Essentra Components | FINNED RIVET A8.7 B19.1 | 0 | |||
| 135010859902 | Essentra Components | 0 | ||||
| 07900-01085 | Avdel | GUIDE TUBE | 0 | |||
| E3-1411-085 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E5-1-085-081 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-100 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E3-1251-085 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
![]() EBV Elektronik | LD1085V![]() | STMicroelectronics | LDO Regulator Pos 125V to 28V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V) RoHS : Compliant | 1,100 | ||
LD1085D2M-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 1,000 | |||
LD1085D2T33R![]() | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| VSMA1085600 | Vishay Intertechnologies | (Alt: VSMA1085600) RoHS : Compliant | 600 | |||
| FP11085_LISA2-RS-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11085_LISA2-RS-CLIP) RoHS : Compliant | 100 | |||
| SIM7912G-M2 S2-1085F-Z306Z | SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085F-Z306Z) RoHS : Compliant | 2 | |||
| P3T1085UKZ | NXP Semiconductors | Temperature Sensor IC Digital 05C 40 C 125 C WLCSP 6 Pins (Alt: P3T1085UKZ) RoHS : Compliant | 0 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
| VSMA1085250 | Vishay Intertechnologies | (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
LD1085D2T-R![]() | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2T-R) RoHS : Compliant | 0 | |||
| VSMA1085400 | Vishay Intertechnologies | IR Emitter 860nm 1350mWsr 15A 355V 2Pin SMD TR (Alt: VSMA1085400) RoHS : Compliant | 0 | |||
TJA1085HN,118![]() | NXP Semiconductors | FlexRay Transceiver 4TX 4RX 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085HN,118) RoHS : Compliant | 0 | |||
| VSMA1085750X02 | Vishay Intertechnologies | HiPow IR Emitting Diode 850nm e3 (Alt: VSMA1085750X02) RoHS : Compliant | 0 | |||
| SIM7906E-PCIE S2-1085H | SIMCom | Cellular Module DL CA LTEFDD LTETDD WCDMA 33V to 43V 30mm x 51mm x 43mm (Alt: SIM7906E-PCIE S2-1085H) RoHS : Compliant | 0 | |||
| SIM7906E-PCIE S2-1085C | SIMCom | MultiBand LTEFDDLTETDDWCDMA GNSS (Alt: SIM7906E-PCIE S2-1085C) RoHS : Compliant | 0 | |||
![]() Flip Electronics | NCP81085MTTXG | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,324 | |
| SI1085-A-GMR | Silicon Laboratories Inc | Stock, Ship Today |
| 1,568 | ||
![]() Master Electronics | TMS-108-54-F-S | Samtec Inc | Through-Hole Micro Header Rohs Compliant: Yes |Samtec Inc. TMS-108-54-F-S RoHS : Compliant |
| 0 | |
| TMS-108-58-L-S | Samtec Inc | Pin Header Board-to-Board 1.27 mm 1 Rows 8 Contacts Through Hole TMS Series RoHS : Compliant |
| 0 | ||
| 1671085 | Phoenix Contact | Sensor/actuator cable - 3-position - PUR halogen-free - black-gray RAL 7021 - free cable end - on Socket angled M8 - with 2 LEDs - cable length: 5 m RoHS : Compliant |
| 0 | ||
| 121571-0853 | ITT Interconnect Solutions | Circular Connector - Box Mount - Contact Arrangement: 36-3 - Sockets - Threaded Coupling - Endbell w/Clamp & Bushing RoHS : Compliant |
| 0 | ||
| 132041-0851 | ITT Interconnect Solutions | Circular Plastic Push Pull Inline Receptacle Gray 7 Pin 5 A PLC Series | ITT Cannon PLC1G422H07 RoHS : Compliant |
| 0 | ||
| 132041-1085 | ITT Interconnect Solutions | Circular Plastic Push Pull Inline Receptacle Gray 9 Pin 3 A PLC Series | ITT Cannon PLC1G623J09 RoHS : Compliant |
| 0 | ||
| 1108567-1 | TE Connectivity | HIP-K.6/16.AG.M6 OB MOQ Reduction RoHS : Compliant |
| 0 | ||
| 11108543-00 | TE Connectivity | AST4530I00069H1X9353:CTO-13000000-02 MOQ Reduction RoHS : Compliant |
| 0 | ||
| ESQ-108-58-L-S | Samtec Inc | Conn Elevated Socket SKT 8 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| DW-08-14-F-Q-1085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-09-14-L-D-1085 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-10-14-T-T-1085 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-15-14-F-S-1085 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-24-14-L-S-1085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-28-14-F-Q-1085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1085 | Adafruit Industries | Data Conversion IC Development Tools ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT / Qwiic |
| 50 | |
| 1085776 | Phoenix Contact | I/O Modules Plug for cold junction compensation for thermocouples in combination with MACX MCR(-EX)-TC... temperature transducers RoHS : Compliant |
| 50 | ||
| BPSX 1-08-50 | Bias Power Inc | Switching Power Supply 1W 8V, 5V DUAL, 85-265VACin, Extreme Temp |
| 50 | ||
| 1085169 | Phoenix Contact | Ethernet Modules FL SWITCH 1004NT-SFX RoHS : Compliant |
| 50 | ||
| 2810850000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories ZQV 4N/20 BL RoHS : Compliant |
| 43 | ||
| 1085488 | Phoenix Contact | Mounting Hardware FL Panel Adapter 22.5 RoHS : Compliant |
| 39 | ||
| 116210-85 | AMETEK Inc | Vacuum Motor, Ametek Lamb, 120V, 5.7", 2-stage, tangential, 9A |
| 1 | ||
| 1085163 | Phoenix Contact | Ethernet Modules FL SWITCH 1105NT RoHS : Compliant |
| 0 | ||
| 601.0853.002 | Altech Corporation | LIMIT SWITCH, REMOTE RESET,SGS-SA2Z W F3 24V, 24V RESET |
| 0 | ||
| 126-1085 | Eaton Corporation | Connector mini hex basic female solder cup termination 5 socket contact |
| 0 | ||
| 1010850030 | Weidmüller Interface GmbH & Co. KG | Sensor Cables / Actuator Cables IE-C5DB4RE0030MCSMCS-E RoHS : Compliant |
| 0 | ||
| 1085604 | Phoenix Contact | DC charging cable, EV charg Conn to free end, GB/T Mode 4, 3pwr 6sig, 250/20/2A, 4m, EV-GBG4C-DC250A-4,0M70ESBK01 |
| 0 | ||
| 1085260 | Phoenix Contact | Thermal Transfer Printer, incl. Euro/US power cable and USB cable, THERMOMARK ROLL 2.0 |
| 0 | ||
| 1085162 | Phoenix Contact | Industrial Ethernet Switch, 8 RJ45 ports with 10/100/1000 Mbps on all ports, FL SWITCH 1108NT RoHS : Compliant |
| 0 | ||
| 1085243 | Phoenix Contact | Industrial Gigabit Ethernet Switch, 8 Port 10/100/1000 Mbps, Unmanaged, FL SWITCH 1108N RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C10858 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm. SMA Male to SMP Female Non-Magnetic Cable Using PE-SR405-NM Coax., Pasternack’s PE3C10858 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. | 50 | ||
| PE3C10858-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMP Female Non-Magnetic Cable 36 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10858-36 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858-36 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858-36 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858-36 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 10 | ||
| PE3C10858-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMP Female Non-Magnetic Cable 18 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10858-18 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858-18 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858-18 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858-18 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 10 | ||
| PE3C10850-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female to SMP Female Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-9 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-9 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 9 | ||
| PE3C10859-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female to SMP Female Non-Magnetic Cable 6 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10859-6 non-magnetic SMP female to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10859-6 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10859-6 SMP jack to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 5 | ||
| PE3C10855-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 12 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-12 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-12 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-12 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10855-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 24 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-24 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-24 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-24 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-24 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10851-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-12 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-12 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-12 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10851LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. C Female to N Female Cable Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. | 0 | |||
| PE3W10855 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMC Jack Cable Using RG316 Coax. PE3W10855 is a BNC male to SMC jack cable using RG316 coax. This Pasternack BNC male to SMC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. Our male BNC to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10855 BNC male to SMC jack cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C10853-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-6 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-6 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-6 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-6 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W21085LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to SMA Male Cable Using PE-P086HF Coax with HeatShrink, LF Solder. PE3W21085LF/HS is a SMP male bulkhead to SMA male cable using PE-P086HF coax. This Pasternack SMP male bulkhead to SMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. Our male SMP bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21085LF/HS SMP male bulkhead to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3C10852-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMP Female Right Angle Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10852-18 non-magnetic SMA male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10852-18 can also be known as a non-magnetic SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10852-18 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10852-18 can also be used in the other direction and will be a right angle SMP jack to SMA plug cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1085 | Pasternack Enterprises | 0 | ||||
| PE3C10854 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Non-Magnetic Cable Using PE-SR047-NM Coax., Pasternack’s PE3C10854 non-magnetic right angle SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10854 can also be known as a non-magnetic right angle SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to SMP female cable has a maximum VSWR of 1.7:1. This PE3C10854 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10854 can also be used in the other direction and will be an SMP jack to right angle SMP jack cable assembly if the opposite connectivity is required. This non-magnetic SMP right angle jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. | 0 | |||
![]() Vyrian | DS1085LZ-12+ | Analog Devices Inc | 6,400 | |||
| DS1085LZ-5+ | Analog Devices Inc | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant | 6,400 | |||
| DS1085LZ5B2 | Analog Devices Inc | 5,300 | ||||
| LM1085IS-3-3-NOPB | Texas Instruments | 5,050 | ||||
| 1085488 | Phoenix Contact | RoHS : Compliant | 3,850 | |||
| 1671085 | Phoenix Contact | Interconnection Device RoHS : Compliant | 2,750 | |||
| LT1085CT-3.3#PBF | Analog Devices Inc | Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Compliant | 1,900 | |||
| LT1085CM-3-6-TRPBF | Analog Devices Inc | 1,700 | ||||
| LT1085IT-12#PBF | Analog Devices Inc | Fixed Positive LDO Regulator, 12V, 1.2V Dropout, PSFM3 RoHS : Compliant | 1,350 | |||
| MTC8C1085S1VC72BF1 | Micron Technology Inc | 730 | ||||
| MTC8C1085S1AC64BB1 | Micron Technology Inc | 710 | ||||
| MRF21085LSR3 | NXP Semiconductors | RoHS : Compliant | 48 | |||
| RH1085K | Analog Devices Inc | Regulator, 1 Output, BIPolar RoHS : Not Compliant | 32 | |||
| RH1085MK | Analog Devices Inc | Adjustable Positive LDO Regulator, 1.5V Dropout, MBFM2 RoHS : Not Compliant | 17 | |||
MAX1085BCSA-T![]() | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, BICMOS, PDSO8 RoHS : Not Compliant | 6 | |||
![]() Waytek, Inc. | 12110853-L | Aptiv PLC | Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece |
| 5,543 | |
![]() Win Source Electronics | CLA4611-085LF | Skyworks Solutions Inc | 2 X 2 QFN PIN LIMITER DIODE RoHS : Compliant |
| 50,000 | |
TPS61085PWR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP RoHS : Compliant |
| 32,215 | ||
TPS61085TPWR![]() | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP / Boost Switching Regulator IC Positive Adjustable 2.8V 1 Output 2A (Switch) 8-TSSOP (0.173", 4.40mm Width) RoHS : Compliant |
| 22,000 | ||
| ADM1085AKS | Analog Devices Inc | Supervisory Circuit 1-Channel SC-70 |
| 15,000 | ||
TPS61085PW![]() | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP RoHS : Compliant |
| 13,446 | ||
LM1085IT-ADJ![]() | Texas Instruments | IC REG LDO ADJ 3A TO220-3 RoHS : Not Compliant |
| 10,800 | ||
LM1085ISX-3.3![]() | Texas Instruments | IC REG LDO 3.3V 3A DDPAK RoHS : Not Compliant |
| 9,000 | ||
LM1085IS-3.3/NOPB![]() | Texas Instruments | IC REG LDO 3.3V 3A DDPAK RoHS : Compliant |
| 8,590 | ||
LM1085ISX-3.3/NOPB![]() | Texas Instruments | LDO Regulator Pos 3.3V 3A 4-Pin(3+Tab) DDPAK T/R / IC REG LDO 3.3V 3A DDPAK RoHS : Compliant |
| 8,230 | ||
LM1085IT-ADJ/NOPB![]() | Texas Instruments | LM1085 3A Low Dropout Positive Regulators RoHS : Compliant |
| 5,740 | ||
LT1085CM-3.3![]() | Linear Technology | 3A, 5A, 7.5A Low Dropout Positive Fixed Regulators RoHS : Not Compliant |
| 1,250 | ||
LM1085IS-12/NOPB![]() | Texas Instruments | LM1085 3A Low Dropout Positive Regulators RoHS : Compliant |
| 1,230 | ||
LT1085CM-3.3#TRPBF![]() | Linear Technology | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 1,027 | ||
LT1085CM-3.3#PBF![]() | Linear Technology | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 530 | ||
LT1085CT#PBF![]() | Linear Technology | IC REG LDO ADJ 3A TO220-3 RoHS : Compliant |
| 180 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |