1110BACE-R Price, 판매업체, Stock

1 : $646.511
5 : $646.511
10 : $593.735
25 : $510.404
50 : $510.404
100 : $493.102
250 : $476.934
500 : $476.934
1,000 : $476.934
2,500 : $476.934
10,000 : $476.934

1305-041-1102

Amphenol Aerospace

Cable Assembly

1110-1-J-W8

HellermannTyton

Harness Mgmt

M22759/11-10-4

Harbour Industries

Wire and Cable

1110-2-B7-W21

HellermannTyton

Harness Mgmt

1110-4-J-WM250

HellermannTyton

Harness Mgmt

M85049/111-10KZ01-6

Glenair Inc

Connector
RoHS : Compliant

380HS115NF1110M8

Glenair Inc

Connector Acc
RoHS : Not Compliant

390GS013NF1110H6

Glenair Inc

Connector
RoHS : Not Compliant

390HS052XM1110C

Glenair Inc

Connector

MWDM1L-25SCBRR1-.110

Glenair Inc

Connector
RoHS : Not Compliant

M22759/11-10-9

Harbour Industries

Hook-Up Wire

M85049/111-08TZ01-6D

Glenair Inc

Connector
RoHS : Compliant

Flip Electronics

SJA1110AEL/0Y

NXP Semiconductors

Stock

212,140

SJA1110CEL/0Y

NXP Semiconductors

Stock
RoHS : Compliant

60,000

LPC1110FD20,529

NXP Semiconductors

Stock
RoHS : Compliant

6,460

Maritex

1110-188-002

Avalue Technology

Metal terminal; female; for FPC housings

5,000 : $0.049
2,000 : $0.057
500 : $0.063
1 : $0.07

30,000

MF11-103K4000JA LEAD FREE

Shenzhen Ampron Technology Corp

Thermistor NTC; 10kOhm; 10%; B=4000; D=6.5mm

1,000 : $0.064
100 : $0.072
1 : $0.08

16,578

10104111-0001LF

Amphenol Corporation

USB/DVI/HDMI Connectors; 10104111-0001LF; AMPHENOL; 5; Receptacle; Right Angle; Gold

1,000 : $0.329
500 : $0.344
100 : $0.436
30 : $0.484
10 : $0.527
1 : $0.6359

9,331

ULO-TB51-306/5.0-03P-1110A

ULO

PCB terminal block; pitch 5.00mm; 3-ways; vertical; wire range 1.5mm2 (AWG 22-14); with screws for a cross screwdriver; brass cage; grey color; UL 300V/10A, TUV 250V/15A

1,000 : $0.081
500 : $0.099
100 : $0.119
25 : $0.137
1 : $0.218

805

ULO-TB51-306/5.0-02P-1110A

ULO

PCB terminal block; pitch 5.00mm; 2-ways; vertical; wire range 1.5mm2 (AWG 22-14); with screws for a cross screwdriver; brass cage; grey color; UL 300V/10A, TUV 250V/15A

1,000 : $0.053
500 : $0.066
100 : $0.081
25 : $0.091
1 : $0.144

537

1241.1104.7093

Schurter Electronic Components

Panel-mount push-button switch; momentary; 18mm; red round button; black bezel; snap-in mounting; solder terminals; 125mA, 48VDC
RoHS : Compliant

100 : $2.245
50 : $2.376
30 : $2.716
20 : $3.06
10 : $3.549
5 : $3.825
1 : $4.0534

200

T4111001041-000

TE Connectivity

Circular Connectors; T4111001041-000; TE CONNECTIVITY; 4; 4; 4
RoHS : Compliant

100 : $6.64
50 : $7.256
10 : $8.545
1 : $10.326

181

P1110-GR-LN

BEISIT

Cabel gland PG11; nylon; PG11 5-10mm; grey; Flat O-ring; with lock nut

100 : $0.454
50 : $0.474
25 : $0.502
5 : $0.517
1 : $0.545

100

P1110-LN

BEISIT

Cabel gland PG11; nylon; PG11 3-7mm; grey; Flat O-ring; with lock nut; for wrench 22

100 : $0.474
50 : $0.496
25 : $0.524
5 : $0.542
1 : $0.57

P1110B-LN

BEISIT

Cabel gland PG11; nylon; PG11 5-10mm; black; Flat O-ring; with lock nut; for wrench 22

100 : $0.474
50 : $0.496
25 : $0.524
5 : $0.542
1 : $0.57

P1110BR-LN

BEISIT

Cable gland PG11;nickel plated brass; PG11 3-7mm; with lock nut

100 : $1.935
50 : $2.029
25 : $2.143
5 : $2.214
1 : $2.331

SYS1561-1105-MICRO-USB

Sunny Electronics Corp

Power Supply; 10.5W; 5V; 0-2.1A

20 : $5.082
10 : $5.477
5 : $5.675
1 : $5.87

SYS1561-1105-5C USB C

Sunny Electronics Corp

Power Supply; 10.5W; 5V; 0-2.1A

20 : $10.498
10 : $11.304
5 : $11.704
1 : $12.112

SYS1561-1105-USB

Sunny Electronics Corp

Power Supply; 10.5W; 5V; 0-2.1A

20 : $6.964
10 : $7.499
5 : $7.765
1 : $8.036

111014-5000

Molex

Computer Cables; 111014-5000; MOLEX; Yes; Shielded; Plug, USB; Round
RoHS : Compliant

500 : $18.066
100 : $20.346
30 : $25.339
10 : $30.19
1 : $38.2337

Neutron USA

1110-F212-P1M1-1A

E-T-A

Circuit Breakers Single pole switch/thermal circuit breaker (S-type TO CBE to EN 60934) with tease-free, trip-free, snap action mechanism. Designed for snap-in panel mounting utilising round hole or industry standard fuse-holder cut-out dimensions. Fe
RoHS : Compliant

1 : $69.99

09930011108

HARTING Technology Group

Han S 120 Screw Mount Housing, blue, M18, w- male contact M6
RoHS : Compliant

1 : $69.41

1241.1104.7091

Schurter Electronic Components

Pushbutton Switches MCS18 SWITCH MOMTY YELLOW
RoHS : Compliant

1 : $44.99

09111013171

HARTING Technology Group

Heavy Duty Power Connectors HAN HC MODULAR 800 FEMALE CRIM

1 : $154.99

09452151110

HARTING Technology Group

Modular Connectors / Ethernet Connectors RJI IP67HAN3M GENDER CHANGER STR. MET
RoHS : Compliant

1 : $324.99

08A36-01-1-10N-C

Grayhill Inc

Rotary Switch Standard 10 position pole
RoHS : Compliant

1 : $154.99

1110625

Phoenix Contact

Pluggable Terminal Blocks LPC 2,5/ 8-STF-5,08
RoHS : Compliant

1 : $52.75

CL-9011110-WW

Corsair Electrical Connectors Inc

Commander PRO Fan Cntrlr

1 : $64.99

CSM CKWM 19-11-10

TURCK Inc

Cordset, Str M23 M 19pos to R/A M23 F 19pos, (3x18, 8x22)AWG, 10M, TPU Yellow, U-54502

1 : $428.24

03F11 100

White-Rodgers

Thermostats 1/2" Bimetal Disc Thermostat, Close On Rise

1 : $49.99

2811103

Phoenix Contact

Terminal Block Interface Modules MCR-VAC-UI-O-DC
RoHS : Compliant

1 : $951.48

1241.1102.7093

Schurter Electronic Components

Pushbutton Switches MCS 18 FP. QD. SW RT

1 : $39.99

1110646

Phoenix Contact

Pluggable Terminal Blocks LPC 2,5/17-STF-5,08
RoHS : Compliant

1 : $49.99

PXP4011/10S/4550

Bulgin

Standard Circular Connector In-Line Flex Cbl 10 P Sckt 4.5-5mm Cbl

1 : $49.99

SIG100-0A0111100

SICK AG

Sensor Integration Gateway

1 : $384.47

Pasternack Enterprises US

PE3FCA311-10M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to LC UPC, OS2 Single Mode Distribution Cable, 5.0mm LSZH, 2.0mm breakout, Yellow-10M. Pasternack’s PE3FCA311-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 6-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA311-10M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $190.99
5 : $183.35
10 : $175.71
25 : $168.07

PE3C6511-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-500, RF Cable Type: SPO-500, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 100 cm Length Using SPO-500 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 100 cm length using SPO-500 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 100 cm length using SPO-500 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP500-716M-LP 7/16 DIN to TC-SPP500-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP500-716M-LP 7/16 DIN cable connection on one end and TC-SPP500-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP500-716M-LP 7/16 DIN to TC-SPP500-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP500-716M-LP 7/16 DIN to TC-SPP500-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6511-100CM, can also be known as a low PIM TC-SPP500-716M-LP 7/16 DIN plug to TC-SPP500-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP500-716M-LP 7/16 DIN plug to TC-SPP500-716M-LP 7/16 DIN plug cable assembly PE3C6511-100CM is built with SPO-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP500-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP500-716M-LP 7/16 DIN to TC-SPP500-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM TC-SPP500-716M-LP 7/16 DIN male to TC-SPP500-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP500-716M-LP 7/16 DIN plug to TC-SPP500-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP500-716M-LP 7/16 DIN to TC-SPP500-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP500-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 100 cm length using SPO-500 coax using Times Microwave parts.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

PE3C8511-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated 7/16 DIN Male to 7/16 DIN Female Cable Using SPO-250 Coax Using Times Microwave Parts in 100 CM., Radio frequency assembly outdoor rated 7/16 DIN male to 7/16 DIN female cable using SPO-250 coax using Times Microwave parts in 100 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to 7/16 DIN female cable using SPO-250 coax using Times Microwave parts in 100 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C8511-100CM, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C8511-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8511-100CM can also be used in the other direction and will be 7/16 DIN female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to 7/16 DIN female cable using SPO-250 coax using Times Microwave parts in 100 CM.

1 : $70.69
25 : $67.16
50 : $63.62
100 : $60.79

PE70MP1110

Pasternack Enterprises

Key Specifications, Connector In Series: TNC, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm TNC Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1110 from Pasternack has TNC connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial TNC to type F impedance matching pad has a female TNC in and a female F type out. Our 50 Ohm TNC to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm TNC female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm TNC to 75 Ohm type F matching pad is brass. 50 Ohm TNC female to 75 Ohm F type female RF impedance pad PE70MP1110 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with TNC to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts.

1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09

PE3C11100

Pasternack Enterprises

PE3C1110-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Female Bulkhead to TNC Male Low Loss Cable 100 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N female bulkhead to TNC male low loss cable 100 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to TNC male low loss cable 100 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a female gender on end 1 and male on end 2. This type N to TNC cable is a female to male coax assembly, PE3C1110-100CM, can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped same-day as it is purchased. N type jack to TNC plug cable assembly PE3C1110-100CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N female bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1110-100CM can also be used in the other direction and will be TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to TNC male low loss cable 100 cm length using PE-P142LL coax, RoHS.

1 : $372.99
25 : $354.34
50 : $335.69

PE3C1110-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. N Female Bulkhead to TNC Male Low Loss Cable 50 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N female bulkhead to TNC male low loss cable 50 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to TNC male low loss cable 50 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type bulkhead cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a female gender on end 1 and male on end 2. This N type to TNC cable is a female to male coax assembly, PE3C1110-50CM, can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N jack to TNC plug cable assembly PE3C1110-50CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type female bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1110-50CM can also be used in the other direction and will be TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to TNC male low loss cable 50 cm length using PE-P142LL coax, RoHS.

1 : $333.99
25 : $317.29
50 : $300.59

PE3C11102

Pasternack Enterprises

PE7611-10

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator SMA Male to SMA Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7611-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7611-10 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7611-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $65.29
10 : $62.68
25 : $60.07
100 : $57.46

PE3C1110-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Female Bulkhead to TNC Male Low Loss Cable 200 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N female bulkhead to TNC male low loss cable 200 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to TNC male low loss cable 200 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a female gender on end 1 and male on end 2. This type N to TNC cable is a female to male coax assembly, PE3C1110-200CM, can also be known as a low loss N type jack to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N jack to TNC plug cable assembly PE3C1110-200CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N female bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1110-200CM can also be used in the other direction and will be TNC male to N type female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to TNC male low loss cable 200 cm length using PE-P142LL coax, RoHS.

1 : $460.99
25 : $437.94
50 : $414.89

PE3W11103

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm.

PE3C1110-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Female Bulkhead to TNC Male Low Loss Cable 24 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N female bulkhead to TNC male low loss cable 24 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to TNC male low loss cable 24 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a female gender on end 1 and male on end 2. This type N to TNC cable is a female to male coax assembly, PE3C1110-24, can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped same-day as it is purchased. N type jack to TNC plug cable assembly PE3C1110-24 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N female bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1110-24 can also be used in the other direction and will be TNC male to N type female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to TNC male low loss cable 24 inch length using PE-P142LL coax, RoHS.

1 : $269.99
25 : $256.49
50 : $242.99

PE3W11105

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm.

PE3C11106/BK/HS

Pasternack Enterprises

PE3W11106

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm.