| 전자부품 데이터시트 검색엔진 |
|
1188-P-AB3-R 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | HX1188NLT | Pulse Electronics Corporation | RoHS : Compliant | 6,000 | ||
![]() ComSIT USA | 11882750 | AVAILABLE EU | 2,551 | |||
| HX1188FNLT | PUL | AVAILABLE EU | 1,717 | |||
![]() Component Electronics, Inc | 61188-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,890 | |
| 1-1419118-8 | TE Connectivity | IN STOCK SHIP TODAY |
| 94 | ||
| HX1188 | Pulse Electronics Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 24 | ||
| HX1188NL | Pulse Electronics Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 24 | ||
| 09-75-1188 | Molex | IN STOCK SHIP TODAY | 20 | |||
| 39-29-1188 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 19 | ||
| 50355-1188A | DuPont | IN STOCK SHIP TODAY |
| 19 | ||
| HX1188FNL | Pulse Electronics Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
EPF81188AQC208-2![]() | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
1N1188A![]() | International Rectifier | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
| 1-1419118-8 | TE Connectivity | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 1188-10-AL | RAF Electronic Hardware |
| 38 | ||
| 1188 | Heyco | SR 4N-6 WHITE | 0 | |||
| 11888H | Heyco | SHOCK PROOF SNAP RIVET SPPR 122-197 HR TAN | 0 | |||
| 01188-02814 | Avdel | AVTRONIC RIV 2.8MM SN BR | 0 | |||
| 1188-10-B-5 | RAF Electronic Hardware | 0 | ||||
| 11888F | Heyco | SPPR 122-197 V-0 BLACK | 0 | |||
| 711883 | PennEngineering (PEM) | 0 | ||||
| 1188-10-AL-22 | RAF Electronic Hardware | 0 | ||||
| 1188-10-AL-9 | RAF Electronic Hardware | 0 | ||||
| 1188-8-AL-24 | RAF Electronic Hardware | 0 | ||||
| 1188-8-PH | RAF Electronic Hardware | 0 | ||||
| 11888 | Heyco | SPPR 122-197 BLACK | 0 | |||
| 01188-02508 | Avdel | AVTRONIC RIV 2.5MM SN BR | 0 | |||
| 1188T-10-B | RAF Electronic Hardware | STANDARD BRASS FLAT FACE SPACER | 0 | |||
| 01188-02806 | Avdel | AVTRONIC RIV 2.8MM SN BR 15019 | 0 | |||
![]() Flip Electronics | EPF81188AQC240-4![]() | Altera Corporation | Stock RoHS : Not Compliant | 449 | ||
EPF81188AQC240-3![]() | Altera Corporation | Stock RoHS : Not Compliant | 449 | |||
EPF81188AQC240-2![]() | Altera Corporation | Stock, Ship Today RoHS : Not Compliant |
| 449 | ||
![]() Pasternack Enterprises US | PE3W11885-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Right Angle Cable 12 Inch Length Using RG188-DS Coax., Radio frequency assembly SMA male to SMA male right angle cable 12 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 12 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11885-12 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W11885-12 RF cable has a PTFE jacket of 0.118-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11885-12 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W11885-12 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 202 | |
| PE3W11885-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Right Angle Cable 24 Inch Length Using RG188-DS Coax., Radio frequency assembly SMA male to SMA male right angle cable 24 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 24 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11885-24 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W11885-24 RF cable has a PTFE jacket of 0.118-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11885-24 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W11885-24 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 202 | ||
| PE3W11885-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Right Angle Cable 48 Inch Length Using RG188-DS Coax., Radio frequency assembly SMA male to SMA male right angle cable 48 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 48 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11885-48 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W11885-48 RF cable has a PTFE jacket of 0.118-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11885-48 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W11885-48 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 202 | ||
| PE3W11885-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Male Right Angle Cable 60 Inch Length Using RG188-DS Coax., Radio frequency assembly SMA male to SMA male right angle cable 60 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 60 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11885-60 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W11885-60 RF cable has a PTFE jacket of 0.118-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11885-60 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W11885-60 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 202 | ||
| PE3W11885-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Right Angle Cable 36 Inch Length Using RG188-DS Coax., Radio frequency assembly SMA male to SMA male right angle cable 36 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 36 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11885-36 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W11885-36 RF cable has a PTFE jacket of 0.118-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11885-36 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W11885-36 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 202 | ||
| PE20DV1188 | Pasternack Enterprises | Key Specifications, Connector Series In: SMA, Connector Gender In: Female, Minimum Frequency: 4 GHz, Maximum Frequency: 8 GHz, Number of Output Ports: 8 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 8 Way SMA Power Divider From 4 GHz to 8 GHz Rated at 30 Watts., The PE20DV1188 8-way waveguide power divider (also known as a coaxial power splitter) is rated for a minimum frequency of 4 GHz and a maximum frequency of 8 GHz. This Pasternack 8 port power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power of 30 kW. Our coaxial RF splitter/divider has a female input and 8 female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Our 8-way waveguide power divider has 300 kW of peak input power. Pasternack’s PE20DV1188 coax connectorized power splitter has an aluminum housing and can handle maximum reverse power up to 2 Watts. This threaded connector waveguide power divider has a 0.4 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 8 GHz waveguide power divider has 3 degrees and 4 degrees typical and maximum phase balance, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 8-way RF power divider from Pasternack has a maximum insertion loss of 1.2 dB. The maximum input VSWR of this splitter/divider is 1.5:1 and the minimum isolation is 18 dB. The PE20DV1188 waveguide power divider from Pasternack is ideal for test and measurement, military communications, commercial communications, wireless communications and satcom applications. Our 8 port waveguide power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 8-way coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect waveguide power divider for your requirements. |
| 1 | ||
| PE3W11888 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to N Female Bulkhead Cable Using RG223 Coax. PE3W11888 is a SMA female bulkhead to N female bulkhead cable using RG223 coax. This Pasternack SMA female bulkhead to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our female SMA bulkhead to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11888 SMA female bulkhead to N female bulkhead cable assembly is constructed with RG223 coax. | 0 | |||
| PE3W11887 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Cable Using RG213 Coax. PE3W11887 is a N male right angle to N female cable using RG213 coax. This Pasternack N male right angle to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11887 N male right angle to N female cable assembly is constructed with RG213 coax. | 0 | |||
| PE3W01188 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to BNC Female Bulkhead Cable Using RG316 Coax. PE3W01188 is a SMA male to BNC female bulkhead cable using RG316 coax. This Pasternack SMA male to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01188 SMA male to BNC female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W11884 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMP Female Right Angle Cable Using PE-SR405AL Coax. PE3W11884 is a 2.92mm male to SMP female right angle cable using PE-SR405AL coax. This Pasternack 2.92mm male to SMP female right angle cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMP for connector 2. 2.92mm to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm to female SMP right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W11884 2.92mm male to SMP female right angle cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W11880 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male to QMA Male Right Angle Cable Using PE-P195 Coax. PE3W11880 is a N male to QMA male right angle cable using PE-P195 coax. This Pasternack N male to QMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. N to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11880 N male to QMA male right angle cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W11889LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Plug to SMB Plug Cable Using RG174 Coax with HeatShrink, LF Solder. PE3W11889LF/HS is a FAKRA plug to SMB plug cable using RG174 coax. This Pasternack FAKRA plug to SMB plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMB for connector 2. Our plug FAKRA to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11889LF/HS FAKRA plug to SMB plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W11889 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Plug to SMB Plug Cable Using RG174 Coax. PE3W11889 is a FAKRA plug to SMB plug cable using RG174 coax. This Pasternack FAKRA plug to SMB plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMB for connector 2. Our plug FAKRA to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11889 FAKRA plug to SMB plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W11882 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to SMP Female Right Angle Cable Using PE-SR405AL Coax. PE3W11882 is a SMA female 2 hole flange to SMP female right angle cable using PE-SR405AL coax. This Pasternack SMA female 2 hole flange to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA 2 hole flange to female SMP right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W11882 SMA female 2 hole flange to SMP female right angle cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W21188 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Water Blue FAKRA Jack to TNC Male Cable Using LMR-100 Coax. PE3W21188 is a FAKRA jack to TNC male cable using LMR-100A coax. This Pasternack FAKRA jack to TNC male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm TNC for connector 2. Our jack FAKRA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21188 FAKRA jack to TNC male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | LT1188CT | Analog Devices Inc | Buffer/Inverter Based Peripheral Driver, BIPolar | 11,391 | ||
| MAX1188ACUP+ | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PDSO20 RoHS : Compliant | 10,176 | |||
| MAX1188ACUP+T | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PDSO20 RoHS : Compliant | 10,068 | |||
| MAX1188BCUP+ | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PDSO20 RoHS : Compliant | 10,038 | |||
| LT1188CK | Analog Devices Inc | Buffer/Inverter Based Peripheral Driver, BIPolar, MBFM3 | 9,911 | |||
| LT1188MK | Analog Devices Inc | Buffer/Inverter Based Peripheral Driver, BIPolar, MBFM3 | 8,224 | |||
| MAX1188AEUP+T | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PDSO20 RoHS : Compliant | 7,320 | |||
| SNJ54ACT11881J | Texas Instruments | Arithmetic Logic Unit, CMOS, CDIP28 RoHS : Not Compliant | 6,922 | |||
| VT1188SCFQ | Analog Devices Inc | 5,851 | ||||
| SNJ54AC11881J | Texas Instruments | Arithmetic Logic Unit, CMOS, CDIP28 RoHS : Not Compliant | 5,733 | |||
| TPS61188ARUYT | Texas Instruments | 3,273 | ||||
MAX1188ACUP-T![]() | Maxim Integrated Products | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PDSO20 RoHS : Not Compliant | 762 | |||
MAX1188AEUP-T![]() | Maxim Integrated Products | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PDSO20 RoHS : Not Compliant | 520 | |||
MAX1188ACUP![]() | Maxim Integrated Products | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PDSO20 RoHS : Not Compliant | 429 | |||
MAX1188AEUP![]() | Maxim Integrated Products | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PDSO20 RoHS : Not Compliant | 117 | |||
![]() Win Source Electronics | NCN1188MUTAG![]() | onsemi | IC USB SWITCH 3:1 AUD/MHL 12UQFN RoHS : Compliant |
| 353,088 | |
2DB1188R-13![]() | Diodes Incorporated | TRANS PNP 32V 2A SOT89-3 RoHS : Compliant |
| 40,000 | ||
| HX1188NLT | Pulse Electronics Corporation | XFRMR MAGNETIC 1PORT 1:1 10/100 RoHS : Compliant |
| 34,940 | ||
| CAP1188-1-CP-TR | Microchip Technology Inc | IC TOUCH SENSOR/LED DRVR 24VQFN RoHS : Compliant |
| 20,060 | ||
| HM1188NL | Pulse Electronics Corporation | PULSE XFMR 1CT:1CT TX 1CT:1CT RX / 350μH LAN 10/100 Base-T Pulse Transformer 1CT:1CT Transmitter, 1CT:1CT Receiver Surface Mount RoHS : Compliant |
| 19,800 | ||
| HM1188NLT | Pulse Electronics Corporation | PULSE XFMR 1CT:1CT TX 1CT:1CT RX RoHS : Compliant |
| 19,800 | ||
| HX1188FNLT | Pulse Electronics Corporation | XFRMR MAGNETIC 1PORT 1:1 10/100 RoHS : Compliant |
| 12,686 | ||
| HX1188FNL | Pulse Electronics Corporation | LAN Product Guide - Servers | MODULE XFRMR SGL ETHR LAN 16SOIC RoHS : Compliant |
| 7,571 | ||
| HX1188NL | Pulse Electronics Corporation | Telecom Transformer 2(1CT:1CT) 1.5Ohm Prim. DCR 1.5Ohm Sec. DCR 16 Terminal Gull Wing SMD Automotive / XFRMR MAGNETIC 1PORT 1:1 10/100 RoHS : Compliant |
| 1,880 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |