1394-2-R Price, 판매업체, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum N Male Right Angle to N Male Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male right angle to N male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male right angle to N male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle N type cable connection on one end and type N cable connection on the other. Our low PIM right angle N type to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3C4139-48, can also be known as a low PIM right angle type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C4139-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with right angle N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4139-48 can also be used in the other direction and will be type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM N type right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male right angle to N male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder.

1 : $161.99
25 : $153.89
50 : $145.79

PE3W13944-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. 3.5mm Female Bulkhead to 3.5mm Female Cable Using PE-SR402FLJ Coax in 200CM., Radio frequency assembly 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 200CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 200CM, 3.5mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm bulkhead cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a female gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a female to female coax assembly, PE3W13944-200CM, can also be known as a 3.5mm jack to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 3.5mm jack cable assembly PE3W13944-200CM is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance. RF specs on this 3.5mm female bulkhead to 3.5mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13944-200CM can also be used in the other direction and will be 3.5mm female to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to 3.5mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 200CM.

1 : $760.0
25 : $722.0
50 : $684.0
100 : $653.6

PE3W13944-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 3.5mm Female Bulkhead to 3.5mm Female Cable Using PE-SR402FLJ Coax in 48 Inch., Radio frequency assembly 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 48 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 48 inch, 3.5mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm bulkhead cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a female gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a female to female coax assembly, PE3W13944-48, can also be known as a 3.5mm jack to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 3.5mm jack cable assembly PE3W13944-48 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance. RF specs on this 3.5mm female bulkhead to 3.5mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13944-48 can also be used in the other direction and will be 3.5mm female to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to 3.5mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female bulkhead to 3.5mm female cable using PE-SR402FLJ coax in 48 inch.

1 : $725.0
25 : $688.75
50 : $652.5
100 : $623.5

PE3W13947

Pasternack Enterprises

PE3W13945

Pasternack Enterprises

PE3C11394

Pasternack Enterprises

PE3W01394

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA Female Bulkhead Cable Using LMR-100 Coax. PE3W01394 is a reverse polarity SMA male to reverse polarity SMA female bulkhead cable using LMR-100A coax. This Pasternack reverse polarity SMA male to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01394 SMA reverse polarity male to SMA reverse polarity female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1394/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity SMA Jack to Reverse Polarity SMA Plug Cable 60 Inch Length Using RG8X Coax with HeatShrink., Radio frequency assembly reverse polarity SMA jack to reverse polarity SMA plug cable 60 inch length using RG8X coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA jack to reverse polarity SMA plug cable 60 inch length using RG8X coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3C1394/HS-60 can also be known as a reverse polarity SMA female to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA female to reverse polarity SMA male cable assembly PE3C1394/HS-60 is built with RG8X which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity SMA jack to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1394/HS-60 can also be used in the other direction and will be reverse polarity SMA plug to reverse polarity SMA jack cable assembly if the opposite connectivity is required. SMA reverse polarity female to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA jack to reverse polarity SMA plug cable 60 inch length using RG8X coax with heatshrink.

1 : $203.99
25 : $193.79
50 : $183.59
100 : $175.43

PE3C1394/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Jack to Reverse Polarity SMA Plug Cable Using RG8X Coax with HeatShrink., Radio frequency assembly reverse polarity SMA jack to reverse polarity SMA plug cable using RG8X coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA jack to reverse polarity SMA plug cable using RG8X coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3C1394/HS can also be known as a reverse polarity SMA female to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA female to reverse polarity SMA male cable assembly PE3C1394/HS is built with RG8X which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity SMA jack to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1394/HS can also be used in the other direction and will be reverse polarity SMA plug to reverse polarity SMA jack cable assembly if the opposite connectivity is required. SMA reverse polarity female to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA jack to reverse polarity SMA plug cable using RG8X coax with heatshrink.

PE3C1394/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Jack to Reverse Polarity SMA Plug Cable 12 Inch Length Using RG8X Coax with HeatShrink., Radio frequency assembly reverse polarity SMA jack to reverse polarity SMA plug cable 12 inch length using RG8X coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA jack to reverse polarity SMA plug cable 12 inch length using RG8X coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3C1394/HS-12 can also be known as a reverse polarity SMA female to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA female to reverse polarity SMA male cable assembly PE3C1394/HS-12 is built with RG8X which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity SMA jack to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1394/HS-12 can also be used in the other direction and will be reverse polarity SMA plug to reverse polarity SMA jack cable assembly if the opposite connectivity is required. SMA reverse polarity female to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA jack to reverse polarity SMA plug cable 12 inch length using RG8X coax with heatshrink.

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

PE3W21394

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SMP Female Right Angle Cable Using PE-P086HF Coax. PE3W21394 is a Mini SMP female right angle to SMP female right angle cable using PE-P086HF coax. This Pasternack Mini SMP female right angle to SMP female right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMP for connector 2. Mini SMP right angle to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21394 Mini SMP female right angle to SMP female right angle cable assembly is constructed with PE-P086HF coax.

PE3C1394/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Jack to Reverse Polarity SMA Plug Cable 36 Inch Length Using RG8X Coax with HeatShrink., Radio frequency assembly reverse polarity SMA jack to reverse polarity SMA plug cable 36 inch length using RG8X coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA jack to reverse polarity SMA plug cable 36 inch length using RG8X coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3C1394/HS-36 can also be known as a reverse polarity SMA female to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA female to reverse polarity SMA male cable assembly PE3C1394/HS-36 is built with RG8X which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency reverse polarity SMA jack to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1394/HS-36 can also be used in the other direction and will be reverse polarity SMA plug to reverse polarity SMA jack cable assembly if the opposite connectivity is required. SMA reverse polarity female to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA jack to reverse polarity SMA plug cable 36 inch length using RG8X coax with heatshrink.

1 : $183.99
25 : $174.79
50 : $165.59
100 : $158.23

PE3W13949

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. UHF Female to N Female Cable Using RG8 Coax. PE3W13949 is a UHF female to N female cable using RG8 coax. This Pasternack UHF female to N female cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm N for connector 2. Our female UHF to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13949 UHF female to N female cable assembly is constructed with RG8 coax.

PE3W13943/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Male to TNC Male Cable Using LMR-240-UF Coax with HeatShrink. PE3W13943/HS is a BNC male to TNC male cable using LMR-240-UF coax. This Pasternack BNC male to TNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our male BNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13943/HS BNC male to TNC male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W13946

Pasternack Enterprises

Sager

IALHK11-39419-15

Sensata Circuit Breakers

Circuit Breakers Cir Brkr Hyd Mag

1 : $244.46
11 : $165.21
32 : $104.67
87 : $92.69
194 : $79.55
468 : $63.18

EQRD-078-13.94-TTL-TTL-1-B

Samtec Inc

Ribbon Cables / IDC Cables

1 : $168.83
10 : $157.01
25 : $144.45
50 : $137.23
100 : $130.37

8-2151394-4

TE Connectivity

Bench Top Tools OC-PMC-AT-PA-S-F-MA

712-11-139-41-001000

Mill-Max Mfg Corp

IC & Component Sockets STANDARD SOLDER TAIL CARRIER
RoHS : Compliant

50 : $32.54
100 : $23.11
250 : $17.02
500 : $14.58
1,000 : $12.61
2,500 : $11.01

712-93-139-41-001000

Mill-Max Mfg Corp

IC & Component Sockets STANDARD SOLDER TAIL CARRIER
RoHS : Not Compliant

50 : $29.41
100 : $20.5
250 : $14.8
500 : $12.54
1,000 : $10.78
2,500 : $9.36

FN1394-10-05-11-QN-0

TE Connectivity

AC Power Entry Modules 10A INLET FILTERS POWER ENTRY MODULES
RoHS : Compliant

20 : $42.75
40 : $41.67
160 : $38.7

323-13-139-41-001000

Mill-Max Mfg Corp

IC & Component Sockets Interconnect Socket
RoHS : Compliant

1013947

Phoenix Contact

Phoenix Contact HC-Q05-I-PT-M
RoHS : Compliant

1 : $9.81

209-1-39481-100

Sensata Circuit Breakers

Circuit Breakers Cir Brkr Hyd Mag

1 : $158.32
18 : $107.0
54 : $62.95
150 : $53.88
360 : $42.75
750 : $39.46

1713940

Phoenix Contact

Unspecified Connectors SMSTB25/12-ST-508AUBD:VX1G

50 : $10.7
100 : $10.33
150 : $9.97

1394314

Phoenix Contact

Phoenix Contact PC 16 HC/ 1-G-10 16

25 : $5.45
75 : $5.24
150 : $5.05
325 : $4.86

1713941

Phoenix Contact

Unspecified Connectors

50 : $3.71
100 : $3.56
250 : $3.44
450 : $3.32

1394759-1

TE Connectivity

Terminals MAG MATE CONT.MKII
RoHS : Compliant

45,000 : $0.0776

1013948

Phoenix Contact

Phoenix Contact HC-Q05-I-PT-F
RoHS : Compliant

1 : $10.44

310-43-139-41-001000

Mill-Max Mfg Corp

IC & Component Sockets Interconnect Socket
RoHS : Compliant

50 : $22.54
100 : $14.78
250 : $9.9
500 : $8.07
1,000 : $6.76
2,500 : $5.76

TE Connectivity

1394918-3

TE Connectivity

DUOPLG5.0 BU-STE 3P Connector System: Wire-to-Board Number of Positions: 3 Centerline (Pitch): .197 in Centerline (Pitch): 5 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Wire-to-Board 3 .197" 5 mm | Standard Edge Connector | Part Number: 1394918-3 | Internal Number: 1394918-3 | .197" | TE Connectivity
RoHS : Compliant

2,500 : $0.4
1,000 : $0.47
500 : $0.53
250 : $0.56
100 : $0.63
50 : $0.7
25 : $0.75
10 : $0.84
1 : $0.92

30,624

1394133-1

TE Connectivity

SWS,AMP MCP 2.8K,CVTY DIA,3.6,BLU Part Number: 1394133-1 | Internal Number: 1394133-1 | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.02
2,500 : $0.02
1,000 : $0.03
500 : $0.05
100 : $0.05

9,170

1761394-1

TE Connectivity

DUST COVER, SFP, GANGED & STACKED Connector Cover Type: Dust Cover Primary Product Color: Black Primary Product Material: Thermoplastic Operating Temperature (Max): 105 °C Operating Temperature (Max): 221 °F Dust Cover Black | Connector Cap & Cover | Part Number: 1761394-1 | Internal Number: 1761394-1 | Thermoplastic | TE Connectivity
RoHS : Compliant

1,000 : $0.93
500 : $0.96
250 : $0.99
100 : $1.02
50 : $1.05
1 : $1.15

5,017

1394048-1

TE Connectivity

12POS MQS REC Nominal Voltage Architecture: 12 V Number of Positions: 12 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Wire-to-Board Mating Tab Width: .64 mm Mqs 0.63Mm Unsealed Connector System | 12 V Housing for Female Terminals Wire-to-Wire | Part Number: 1394048-1 | Internal Number: 1394048-1 | .64 mm | TE Connectivity
RoHS : Compliant

10,000 : $0.09
5,000 : $0.12
2,500 : $0.15
1,000 : $0.21
500 : $0.31
100 : $0.37

4,208

9-1394049-1

TE Connectivity

COVER F.15P REC-HSG Number of Positions: 15 Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover - Cable Exit Primary Product Material: PA GF Cable Exit Angle: 90 ° Leavyseal Connector Backshell | 15 Black Cover - Cable Exit PA GF | Part Number: 9-1394049-1 | Internal Number: 9-1394049-1 | TE Connectivity
RoHS : Compliant

1 : $2.08

732

9-1394050-1

TE Connectivity

COVER F.21P REC-HSG Number of Positions: 21 Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover - Cable Exit Primary Product Material: PA GF Cable Exit Angle: 90 ° Leavyseal Connector Backshell | 21 Black Cover - Cable Exit PA GF | Part Number: 9-1394050-1 | Internal Number: 9-1394050-1 | TE Connectivity
RoHS : Compliant

1 : $2.1

634

1825139-4

TE Connectivity

A203P3ZQ04 Contact Current Rating: 5 A Configuration (Pole-Throw): Double Pole - Double Throw Operating Function: On Off On Number of Positions: 3 Operating Voltage: 28 VDC Toggle Switch | 5 A Double Pole - Double Throw On Off On 3 | Part Number: 1825139-4 | Internal Number: 1825139-4 | Alias Number: A203P3ZQ04 | TE Connectivity
RoHS : Compliant

250 : $10.27
100 : $10.68
50 : $11.09
25 : $11.5
10 : $11.91
1 : $12.32

479

1-1825139-4

TE Connectivity

A205P3ZQ04 Contact Current Rating: 5 A Configuration (Pole-Throw): Double Pole - Double Throw Operating Function: (On) Off (On) Number of Positions: 3 Operating Voltage: 28 VDC Toggle Switch | 5 A Double Pole - Double Throw (On) Off (On) 3 | Part Number: 1-1825139-4 | Internal Number: 1-1825139-4 | Alias Number: A205P3ZQ04 | TE Connectivity
RoHS : Compliant

250 : $9.73
100 : $10.12
50 : $10.51
25 : $10.89
10 : $11.28
1 : $11.67

476

1394522-3

TE Connectivity

MIXED SOCKET HOUSING, 42POS. , Nominal Voltage Architecture: 12 V Number of Positions: 42 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 5.8 mm 2.8 mm 1.6 mm Timer Connector Housing | 12 V 42 Housing for Female Terminals Wire-to-Wire | Part Number: 1394522-3 | Internal Number: 1394522-3 | 5.8 mm | TE Connectivity
RoHS : Compliant

1 : $11.69

155

1394026-1

TE Connectivity

FLA-STE-GEH9,5MM 2P Nominal Voltage Architecture: 12 V 48 V 24 V Number of Positions: 2 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Tab Width: 9.5 mm 48V Ready 9.5Mm Sealed Connector | 12 V | Part Number: 1394026-1 | Internal Number: 1394026-1 | 9.5 mm | TE Connectivity
RoHS : Compliant

1 : $8.47