175-F150-R Price, 판매업체, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female to SMB Plug Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly SMA female to SMB plug cable 48 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMB plug cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assembly has female gender on end 1 and plug on end 2. PE3175-48 can also be known as a SMA jack to SMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. SMA jack to SMB male cable assembly PE3175-48 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3175-48 RF cable are available on our downloadable PDF datasheet.PE3175-48 can also be used in the other direction and will be SMB plug to SMA female cable assembly if the opposite connectivity is required. SMA jack to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $85.99
25 : $81.69
50 : $77.39
100 : $73.95

PE3W17500

Pasternack Enterprises

PE3W17582

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Right Angle Bulkhead to N Female Cable Using LMR-195 Coax. PE3W17582 is a 1.0/2.3 jack right angle bulkhead to N female cable using LMR-195 coax. This Pasternack 1.0/2.3 jack right angle bulkhead to N female cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm N for connector 2. 1.0/2.3 right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack 1.0/2.3 right angle bulkhead to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17582 1.0/2.3 jack right angle bulkhead to N female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1759/HS

Pasternack Enterprises

PE3W17536/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Mini SMP Female to SMB Plug Cable Using PE-SR405FLJ Coax with HeatShrink. PE3W17536/HS is a Mini SMP female to SMB plug cable using PE-SR405FLJ coax. This Pasternack Mini SMP female to SMB plug cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMB for connector 2. Our female Mini SMP to plug SMB cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W17536/HS Mini SMP female to SMB plug cable assembly is constructed with PE-SR405FLJ coax.

PE3W17581

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male to N Male Right Angle Cable Using LMR-240-UF Coax. PE3W17581 is a TNC male to N male right angle cable using LMR-240-UF coax. This Pasternack TNC male to N male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17581 TNC male to N male right angle cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W17592LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to TNC Male Cable Using RG174 Coax with HeatShrink, LF Solder. PE3W17592LF/HS is a reverse polarity SMA female to TNC male cable using RG174 coax. This Pasternack reverse polarity SMA female to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity female SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17592LF/HS SMA reverse polarity female to TNC male cable assembly is constructed with RG174 coax.

PE34175-6

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 6 inches. BNC Male to BNC Male Cable 6 Inch Length Using PE-SR401AL Coax., Radio frequency assembly BNC male to BNC male cable 6 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 6 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34175-6, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34175-6 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 6 inch length using PE-SR401AL coax.

1 : $189.99
25 : $180.49
50 : $170.99

PE34175LF-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Male Cable 60 Inch Length Using PE-SR401AL Coax, LF Solder., Radio frequency assembly BNC male to BNC male cable 60 inch length using PE-SR401AL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 60 inch length using PE-SR401AL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34175LF-60, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34175LF-60 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 60 inch length using PE-SR401AL coax, LF solder.

1 : $247.99
25 : $235.59
50 : $223.19

PE37175/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Straight Cut Lead, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50. SMB Plug to Straight Cut Lead Cable Using RG316 Coax. PE37175/HS is a SMB plug to Straight Cut Lead sexless cable using RG316 coax. This Pasternack SMB plug to Straight Cut Lead sexless cable assembly uses a 50 Ohm SMB for connector 1 and a Straight Cut Lead for connector 2. Our plug SMB to sexless Straight Cut Lead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37175/HS SMB plug to Straight Cut Lead sexless cable assembly is constructed with RG316 coax.

PE3C5175-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Female Low Loss Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly BNC male to BNC female low loss cable 48 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC female low loss cable 48 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3C5175-48 can also be known as a low loss BNC plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5175-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our BNC male to BNC female cable has a maximum VSWR of 1.4:1. BNC plug to BNC jack cable assembly PE3C5175-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5175-48 can also be used in the other direction and will be a BNC female to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $67.99
25 : $64.59
50 : $61.19
100 : $58.47

PE3W03417-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. TNC Female Bulkhead to SMA Male Right Angle Cable 50 cm Length Using RG174 Coax., Radio frequency assembly TNC female bulkhead to SMA male right angle cable 50 cm length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to SMA male right angle cable 50 cm length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle SMA cable connection on the other. Our TNC to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This TNC to SMA cable is a female to male coax assembly, PE3W03417-50CM, can also be known as a TNC jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC jack to SMA plug cable assembly PE3W03417-50CM is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency TNC female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03417-50CM can also be used in the other direction and will be right angle SMA male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to SMA male right angle cable 50 cm length using RG174 coax.

1 : $94.99
25 : $90.24
50 : $85.49
100 : $81.69

PE3W17175

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. 3.5mm Female to BNC Male Cable Using RG402 Coax. PE3W17175 is a 3.5mm female to BNC male cable using RG402 coax. This Pasternack 3.5mm female to BNC male cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm BNC for connector 2. Our female 3.5mm to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W17175 3.5mm female to BNC male cable assembly is constructed with RG402 coax.

PE3W17544

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Cable Using LMR-240-UF Coax. PE3W17544 is a TNC male right angle to TNC male cable using LMR-240-UF coax. This Pasternack TNC male right angle to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17544 TNC male right angle to TNC male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1751-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to MCX Plug Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to MCX plug low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MCX plug low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MCX cable connection on the other. Our low loss a SMA to a MCX cable assembly has male gender on end 1 and plug on end 2. PE3C1751-100CM can also be known as a low loss SMA plug to MCX male cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1751-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to MCX male cable assembly PE3C1751-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1751-100CM can also be used in the other direction and will be MCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45

TE Connectivity

175286-3

TE Connectivity

DYNAMIC D-3 TAB CONT. L PdNi & AU 0.76 Contact Mating Area Plating Material: Gold (Au) Contact Type: Tab Wire Contact Termination Area Plating Material: Gold Wire Size: 20 – 16 AWG Operating Voltage: 250 VAC Gold (Au) Tab 20 – 16 AWG | Contact: Component To Wire 15A & 28-14 Wire Size | Part Number: 175286-3 | Internal Number: 175286-3 | TE Connectivity
RoHS : Compliant

5,000 : $1.16
2,500 : $1.19
1,000 : $1.22
500 : $1.24
250 : $1.27
100 : $1.3
50 : $1.33
25 : $1.36
10 : $1.38
1 : $1.41

51,000

1-925017-5

TE Connectivity

250 FASTON HSG.,REC.,1 POS,BLACK Terminal Type: Receptacle Number of Positions: 1 Terminal Orientation: Straight Primary Product Color: Black Connector & Housing Type: Receptacle Receptacle 1 Straight Black | Crimp Terminal Housing | Part Number: 1-925017-5 | Internal Number: 1-925017-5 | TE Connectivity
RoHS : Compliant

2,500 : $0.09
1,000 : $0.11
500 : $0.12
250 : $0.12
100 : $0.14
50 : $0.15
25 : $0.17
10 : $0.2
1 : $0.26

18,430

175778-4

TE Connectivity

CT. CRIMP REC HSG 4P Number of Positions: 4 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 4 Receptacle Housing With | Part Number: 175778-4 | Internal Number: 175778-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.22
500 : $0.22
250 : $0.23
100 : $0.24
50 : $0.24
1 : $0.27

16,608

1759547-1

TE Connectivity

mSATA/mini PCI-E 7H G/F Bus Type: Mini PCI Express Connector System: Board-to-Board Number of Positions: 52 Centerline (Pitch): .031 in Centerline (Pitch): .8 mm Mini PCI Express Board-to-Board 52 .031" | Mini Pci Express & Msata | Part Number: 1759547-1 | Internal Number: 1759547-1 | .031" | TE Connectivity
RoHS : Compliant

1,000 : $1.0
500 : $1.03
250 : $1.08
100 : $1.22
50 : $1.28
25 : $1.3
10 : $1.44
1 : $1.69

7,180

3-641217-5

TE Connectivity

05P MTA156 CONN ASSY 18AWG ORA Number of Positions: 5 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 5 Receptacle Connector Assembly Without | Part Number: 3-641217-5 | Internal Number: 3-641217-5 | TE Connectivity
RoHS : Compliant

1,000 : $2.32
100 : $2.88
25 : $3.04
10 : $3.52
1 : $3.92

7,079

175151-2

TE Connectivity

AMP UNIVE. POWER CONN REC CONT Contact Mating Area Plating Material: Tin (Sn) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 26 – 22 AWG Operating Voltage: 300 VAC 50 VAC Tin (Sn) Receptacle Pre-Tin 26 – 22 AWG | Connector Contact | Part Number: 175151-2 | Internal Number: 175151-2 | Alias Number: CU3067-000 | TE Connectivity
RoHS : Compliant

1,000 : $0.03
100 : $0.04
10 : $0.05
1 : $0.06

4,744

1-175217-5

TE Connectivity

DYNAMIC D-3 REC CONT. M PRE-TIN L/P Contact Mating Area Plating Material: Tin (Sn) Contact Type: Receptacle Wire Size: 24 – 20 AWG Wire Size: .2 – .6 mm² Product Terminates To: Wire & Cable Tin (Sn) Receptacle 24 – 20 AWG .2 – .6 mm² | Contact: Component To Wire 15A & 28-14 Wire Size | Part Number: 1-175217-5 | Internal Number: 1-175217-5 | TE Connectivity
RoHS : Compliant

2,500 : $0.6
1,000 : $0.62
500 : $0.63
250 : $0.65
100 : $0.67
50 : $0.68
25 : $0.7
10 : $0.71
1 : $0.73

4,590

1-175216-2

TE Connectivity

DYNAMIC D-3 REC CONT. S AU 0.38 L/P Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Size: 28 – 24 AWG Wire Size: .08 – .24 mm² Product Terminates To: Wire & Cable Gold (Au) Receptacle 28 – 24 AWG .08 – .24 mm² | Contact: Component To Wire 15A & 28-14 Wire Size | Part Number: 1-175216-2 | Internal Number: 1-175216-2 | TE Connectivity
RoHS : Compliant

2,500 : $1.1
1,000 : $1.13
500 : $1.15
250 : $1.18
100 : $1.21
50 : $1.24
25 : $1.27
10 : $1.3
1 : $1.33

4,224

175216-2

TE Connectivity

DYNAMIC REC CONT. S L/P Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Size: 28 – 24 AWG Wire Size: .08 – .24 mm² Product Terminates To: Wire & Cable Gold (Au) Receptacle 28 – 24 AWG .08 – .24 mm² | Contact: Component To Wire 15A & 28-14 Wire Size | Part Number: 175216-2 | Internal Number: 175216-2 | TE Connectivity
RoHS : Compliant

2,500 : $0.84
1,000 : $0.87
500 : $0.89
250 : $0.91
100 : $0.93
50 : $0.96
25 : $0.98
10 : $1.0
1 : $1.03

2,164

2-292175-2

TE Connectivity

CT BOX HDR V SMT 2P O/TAPE BLA PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 2 | PCB Header & Receptacle | Part Number: 2-292175-2 | Internal Number: 2-292175-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.57
500 : $0.6
100 : $0.78
10 : $0.91
1 : $1.07

2,050

323175

TE Connectivity

TERMINAL,SOLIS R HR 4 3/8 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 4 AWG Wire Size: 16.8 – 26.7 mm² Wire Size: 33100 – 52600 CMA Stud Size: 3/8 Closed Ring Tongue Terminal 4 AWG 16.8 – 26.7 mm² 33100 – 52600 CMA | Ring Terminal | Part Number: 323175 | Internal Number: 323175 | TE Connectivity
RoHS : Compliant

1,000 : $8.77
500 : $9.03
250 : $9.3
100 : $9.56
50 : $9.83
25 : $10.09
10 : $10.36
1 : $10.62

346

5-5175474-5

TE Connectivity

.050CL,CHAMP,R/TANG RCPT,40POS Docking Connector Style: Receptacle Number of Positions: 40 Connector & Contact Terminates To: Printed Circuit Board Circuit Application: Power & Signal Receptacle 40 Printed Circuit Board Power & Signal | Dock Connector | Part Number: 5-5175474-5 | Internal Number: 5-5175474-5 | TE Connectivity
RoHS : Compliant

1,000 : $10.59
500 : $10.89
250 : $11.22
100 : $11.6
50 : $11.94
1 : $13.1

328

1-917541-2

TE Connectivity

DYNAMIC D-5 S/ROW HDR ASY 4P H PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 4 | Header Assembly: Wire-To-Board & 20-45A & 250-630V | Part Number: 1-917541-2 | Internal Number: 1-917541-2 | TE Connectivity
RoHS : Compliant

100 : $18.88
50 : $19.78
25 : $20.68
10 : $21.57
1 : $22.47

195

1757824-5

TE Connectivity

AMPLIMITE,ASY,RCPT,STD,90,ZN,5 Number of Positions: 78 Connector & Housing Type: Receptacle Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 5 D-Shaped Connector | 78 Receptacle Cable-to-Cable Panel Mount | Part Number: 1757824-5 | Internal Number: 1757824-5 | TE Connectivity
RoHS : Compliant

1 : $25.79

112

5-5175474-7

TE Connectivity

.050CL,CHAMP,R/TANG RCPT,60POS Docking Connector Style: Plug Connector System: Board-to-Board Number of Positions: 60 Centerline (Pitch): 1.27 mm Centerline (Pitch): .05 in Plug Board-to-Board 60 1.27 mm | Dock Connector | Part Number: 5-5175474-7 | Internal Number: 5-5175474-7 | TE Connectivity
RoHS : Compliant

1,000 : $14.35
500 : $14.76
250 : $15.22
100 : $15.73
50 : $16.18
1 : $17.76

Teledyne HiRel

54F175LMQB

Teledyne HiRel

FLIP-FLOP, D-TYPE, 4-BIT

DM54LS175W/883

Teledyne HiRel

FLIP-FLOP, D-TYPE, 4-BIT

54F175FMQB

Teledyne HiRel

FLIP-FLOP, D-TYPE, 4-BIT

54F175DMQB

Teledyne HiRel

FLIP-FLOP, D-TYPE, 4-BIT

5962-9317502QXA

Teledyne HiRel

BUS TRANSCEIVER, 16-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

Waytek, Inc.

91757

FTZ Industries

1/0 GA 3/8 Stud Tinned Copper Eyelet Heavy Duty Black Code ALT 36357

1 : $2.0566
50 : $1.9448
100 : $1.8777
200 : $1.7995
500 : $1.7324
1,000 : $1.6877

579

175-S1-100-2

100A Push Trip Reset 1/4" Stud Surface S X S Circuit Breaker HI AMP SIDE BY SIDE 46985

1 : $32.03
5 : $28.59
10 : $26.79
50 : $25.15
100 : $23.95
200 : $22.9

394

MRBF-175

Eaton Electronics

175A Bussmann MRBF 58V Marine Automotive Battery Fuse SAEJ1117 ISO 8820-3 IP66

1 : $13.12
10 : $12.61
50 : $12.2
100 : $11.55
200 : $11.15
500 : $10.79

200

175-P0-100-2R

100A Standard Manual Reset w/Push to Trip 1/4" Studs Panel Mount Circuit Breakers

1 : $25.2399
5 : $23.5431
10 : $22.4826
50 : $19.9374
100 : $19.0355
200 : $17.8164

177

175-S3-200-2

200A Push Trip Reset 3/8" Stud Surface S X S Circuit Breaker HI AMP SIDE BY SIDE MOUNT

1 : $38.07
5 : $33.98
10 : $31.84
50 : $30.07
100 : $28.63
200 : $27.21

154

175-S2-175-2

175A Push Trip Reset 3/8" Stud Surface Mount Circuit Breaker HI AMP

1 : $37.33
5 : $33.32
10 : $31.22
50 : $29.48
100 : $28.08
200 : $26.68

144

175-S1-150-2

150A Push Trip Reset 1/4" Stud Surface S X S Circuit Breaker

1 : $32.03
5 : $28.59
10 : $26.8
50 : $25.3
100 : $24.1
200 : $22.9

144

175-S0-175-2

175A Push Trip Reset 1/4" Stud Surface Mount Circuit Breaker HI AMP

1 : $36.12
5 : $32.24
10 : $30.21
50 : $28.52
100 : $27.17
200 : $25.82

175-S3-050-2

50A Push Trip Reset 3/8" Stud Surface S X S Circuit Breaker disc way, no repl

1 : $33.33
5 : $29.74
10 : $27.87
50 : $26.17
100 : $25.08
200 : $23.83

175-P0-200-2R

200A Standard Manual Reset w/Push to Trip 1/4" Studs Panel Mount Circuit Breakers

1 : $26.4418
5 : $24.6642
10 : $23.5532
50 : $20.8868
100 : $19.9419
200 : $18.6637

175-S1-175-2

175A Push Trip Reset 1/4" Stud Surface S X S Circuit Breaker HI AMP SIDE BY SIDE

1 : $36.83
5 : $32.88
10 : $30.81
50 : $29.09
100 : $27.71
200 : $26.34

175-S3-175-2

175A Push Trip Reset 3/8" Stud Surface S X S Circuit Breaker HI AMP SIDE BY SIDE MOUNT

1 : $37.33
5 : $33.32
10 : $31.22
50 : $29.48
100 : $28.08
200 : $26.68

175-P1-050-2

50A Manual Push to Trip Reset 1/4" Stud 90° Panel Mount Circuit Breaker

1 : $32.03
5 : $28.59
10 : $26.79
50 : $25.3
100 : $24.1
200 : $22.9

SB175CAPL

Anderson Power Products

Protective Plug for Anderson Series 175 w/ Laynard

1 : $21.9181
5 : $19.5304
10 : $18.2285
50 : $17.2524
100 : $16.3837
200 : $15.6247

175-S2-150-2R

150A Standard Manual Reset w/Push to Trip 3/8" Studs Surface Mount Circuit Breakers

1 : $28.8456
5 : $26.9064
10 : $25.6944
50 : $22.7844
100 : $21.7548
200 : $20.3604

Win Source Electronics

NC7SZ175L6X

Fairchild Semiconductor Corporation

IC D-TYPE POS TRG SNGL 6MICROPAK
RoHS : Compliant

1,305 : $0.2306
975 : $0.2572
755 : $0.2661
550 : $0.275
355 : $0.2839
145 : $0.3459

50,000

ADP1755ACPZ

Analog Devices Inc

LDO Regulator Pos 0.75V to 3V 1.2A 16-Pin LFCSP EP / 1.2 A, Low VIN, Low Dropout Linear Regulator
RoHS : Compliant

181 : $1.6647
145 : $1.7324
112 : $1.8
78 : $1.9354
50 : $2.0031
24 : $2.1384

20,885

CSD17577Q5AT

Texas Instruments

MOSFET N-CH 30V 60A 8VSON
RoHS : Compliant

1,335 : $0.2522
1,070 : $0.2624
825 : $0.2727
575 : $0.2932
370 : $0.3034
175 : $0.3239

17,500

MAX17505ATP+

Analog Devices Inc

IC REG BUCK ADJ 1.7A 20TQFN / Buck Switching Regulator IC Positive Adjustable 0.9V 1 Output 1.7A 20-WFQFN Exposed Pad
RoHS : Compliant

183 : $1.8446
137 : $2.0574
106 : $2.1283
77 : $2.1993
50 : $2.2702
21 : $2.7668

15,000

MAX17544ATP+T

Maxim Integrated Products

IC REG BUCK ADJ 3.5A 20TQFN
RoHS : Compliant

44 : $6.8315
33 : $7.6198
26 : $7.8825
19 : $8.1453
12 : $8.408
5 : $10.2473

6,720

74HC175D

Nexperia

Quad D-type flip-flop with reset; positive-edge trigger | IC FF D-TYPE SNGL 4BIT 16SOIC
RoHS : Compliant

515 : $0.5865
385 : $0.6542
300 : $0.6767
215 : $0.6993
140 : $0.7219
60 : $0.8797

6,200

MAX1757EAI+

Maxim Integrated Products

IC BATTERY CHRG LI+ 28-SSOP
RoHS : Compliant

52 : $6.5194
39 : $7.2717
30 : $7.5225
22 : $7.7731
14 : $8.0239
6 : $9.7792

5,900

LTC1754ES6-3.3

Linear Technology

Micropower, Regulated 3.3V/5V Charge Pump with Shutdown in SOT-23
RoHS : Not Compliant

77 : $3.9098
58 : $4.361
45 : $4.5113
33 : $4.6617
21 : $4.8121
9 : $5.8647

5,261

TMP175AIDGKT

Texas Instruments

SENSOR TEMPERATURE SMBUS 8VSSOP
RoHS : Compliant

390 : $0.8693
290 : $0.9696
225 : $1.0031
165 : $1.0364
105 : $1.0699
45 : $1.3039

4,790

ADC1175CIJM

Texas Instruments

IC ADC 8BIT SOP-24

310 : $1.0866
235 : $1.212
180 : $1.2538
130 : $1.2956
85 : $1.3374
35 : $1.6299

4,785

LTC1754ES6-3.3#TRMPBF

Linear Technology

IC REG SWITCHD CAP 3.3V SOT23
RoHS : Compliant

61 : $4.9341
46 : $5.5034
36 : $5.6931
26 : $5.8829
17 : $6.0727
7 : $7.4011

4,760

LTC1754ES6-5

Linear Technology

Micropower, Regulated 3.3V/5V Charge Pump with Shutdown in SOT-23
RoHS : Not Compliant

52 : $5.8788
39 : $6.5571
30 : $6.7832
22 : $7.0093
14 : $7.2354
6 : $8.8182

3,200

LTC1754ES6-5#TR

Linear Technology

RoHS : Not Compliant

52 : $5.8461
39 : $6.5207
30 : $6.7455
22 : $6.9704
14 : $7.1952
6 : $8.7691

2,275

DEA202450BT-2175A1-H

TDK Corporation

RF Filter Band Pass 2450MHz 2400MHz to 2500MHz 2dB 50Ohm SMD 3Pin 0805 T/R / FILTER BANDPASS 2.4 GHZ
RoHS : Compliant

4,040 : $0.0743
3,020 : $0.0829
2,335 : $0.0857
1,695 : $0.0886
1,095 : $0.0914
450 : $0.1114

800

MAX6175AASA+

Maxim Integrated Products

IC VREF SERIES 5V 8SOIC
RoHS : Compliant

18 : $16.7425
14 : $18.6743
11 : $19.3182
8 : $19.9622
5 : $20.6061
2 : $25.1137

100

Wuhan P&S

NLV14175BDR2G

onsemi

RoHS : Compliant

1 : $0.34
100 : $0.22
500 : $0.18
1,000 : $0.17

76,565

J175-D26Z

onsemi

P-Channel Switch

1 : $0.2034
100 : $0.1436
500 : $0.12
1,000 : $0.111

54,000

175-F150-R 판매업체

링크 URL