2041FAAD-R Price, 판매업체, Stock

2041FAAD-R 판매업체

판매업체

부품명

제조업체

상세설명

Price

Qty.
BuyNow

NexGen Digital

DMN2041L-7

Diodes Incorporated

RoHS : Compliant

1,864

204-16203-000X

WRICO

427

5023520410

Molex

100

D20418-50

ITT Interconnect Solutions

RoHS : Not Compliant

2204-1151

Molex

Rutronik

22272041

Molex

04P KK Pin Header 2.54mm STR FrictionL.
RoHS : Compliant

1,425 : $0.2443
2,850 : $0.2398
4,275 : $0.2376
5,700 : $0.2354
7,125 : $0.231

143,925

22232041

Molex

04P KK Pin Header 2.54mm STR FrictionL.
RoHS : Compliant

1,900 : $0.1065
3,800 : $0.1046
5,700 : $0.1036
7,600 : $0.1027
11,400 : $0.1007

23,950

39012041

Molex

04P PLUG HOUS 2R W PANEL MOUNT
RoHS : Compliant

500 : $0.0947
1,000 : $0.093
2,000 : $0.0921
3,000 : $0.0913
4,000 : $0.0896

22,500

T802M-2041001R-V

Amphenol Communications Solutions

08P Pin Header 1.27 x 1.27
RoHS : Compliant

850 : $0.3894
1,700 : $0.3744
2,550 : $0.3685
4,250 : $0.3535
7,650 : $0.3415

15,300

T809M-204121001R-A

Amphenol Communications Solutions

08P SOCKET 1.27 x 1.27
RoHS : Compliant

2,000 : $0.5138
4,000 : $0.4941
6,000 : $0.4862
8,000 : $0.4664
12,000 : $0.4506

12,000

MSM02041

Sauro srl

02P Terminal Block 5.00mm
RoHS : Compliant

900 : $0.2426
1,800 : $0.2382
3,600 : $0.236
7,200 : $0.2338
14,400 : $0.2294

6,300

110-87-320-41-001101

PRECI-DIP SSA

20P DIL SOCKET 300 MIL CONN
RoHS : Compliant

20 : $0.6135
40 : $0.6023
80 : $0.5968
160 : $0.5912
300 : $0.58

4,500

204-10SURD/S530-A3

Everlight Electronics Co Ltd

3MM RED DIFFUSE LEAD:14,6MM
RoHS : Compliant

1,000 : $0.0409
3,000 : $0.0315
5,000 : $0.031
9,000 : $0.031
17,000 : $0.0307

FDH Electronics

EN2997KE62041F7

TE Connectivity

Connector

1 : $256.688
5 : $239.285
10 : $213.906
25 : $210.714
50 : $210.714
100 : $207.615
250 : $201.683
500 : $196.081
1,000 : $193.395
2,500 : $193.395
10,000 : $193.395

983-6S20-41S9

TE Connectivity

Connector

1 : $145.491
5 : $135.627
10 : $121.242
25 : $119.433
50 : $119.433
100 : $117.676
250 : $114.314
500 : $111.139
1,000 : $109.616
2,500 : $109.616
10,000 : $109.616

983-0S20-41S6L

TE Connectivity

Connector

1 : $90.85
5 : $84.691
10 : $75.709
25 : $74.579
50 : $74.579
100 : $73.482
250 : $71.382
500 : $69.4
1,000 : $68.449
2,500 : $68.449
10,000 : $68.449

EN2997KE62041A6

TE Connectivity

Connector

1 : $128.781
5 : $120.05
10 : $107.318
25 : $105.716
50 : $105.716
100 : $104.161
250 : $101.185
500 : $98.374
1,000 : $97.027
2,500 : $97.027
10,000 : $97.027

EN2997S02041A6

TE Connectivity

Connector
RoHS : Compliant

1 : $100.525
5 : $93.71
10 : $83.771
25 : $82.521
50 : $82.521
100 : $81.307
250 : $78.984
500 : $76.79
1,000 : $75.738
2,500 : $75.738
10,000 : $75.738

983-6K20-41P6-L

TE Connectivity

Connector

1 : $128.781
5 : $120.05
10 : $107.318
25 : $105.716
50 : $105.716
100 : $104.161
250 : $101.185
500 : $98.374
1,000 : $97.027
2,500 : $97.027
10,000 : $97.027

M83723/82K2041N

Amphenol Aerospace

Circular Conn

M83723/82K2041N

Aero-Electric Connector Inc

Circular Conn
RoHS : Not Compliant

1 : $124.683
5 : $116.23
10 : $103.903
25 : $102.352
50 : $102.352
100 : $100.847
250 : $97.965
500 : $95.244
1,000 : $93.939
2,500 : $93.939
10,000 : $93.939

EN2997SE72041A8

TE Connectivity

Connector

1 : $100.671
5 : $93.846
10 : $83.892
25 : $82.64
50 : $82.64
100 : $81.425
250 : $79.099
500 : $76.901
1,000 : $75.848
2,500 : $75.848
10,000 : $75.848

M83723/77G2041N-LC

Aero-Electric Connector Inc

Connector 83723

1 : $85.171
5 : $79.396
10 : $70.976
25 : $69.916
50 : $69.916
100 : $68.888
250 : $66.92
500 : $65.061
1,000 : $64.17
2,500 : $64.17
10,000 : $64.17

MS3470W20-41SX

Amphenol Aerospace

Connector 26482

BACC63CC20-41P8H-LC

rms Company

Connector

S4204-1605N

SOURIAU-SUNBANK

Backshells & Ac

1 : $150.956
5 : $150.956
10 : $133.196
25 : $125.796
50 : $125.796
100 : $121.304
250 : $117.121
500 : $117.121
1,000 : $113.217
2,500 : $113.217
10,000 : $109.565

8533-3ES2041SN

SOURIAU-SUNBANK

Connector 83723

ESC11KE02041S80

SOURIAU-SUNBANK

Circular Conn

Pasternack Enterprises US

PE3W20410-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity TNC Jack Bulkhead to Reverse Polarity SMA Plug Right Angle Low Loss Cable 36 Inch Length Using LMR-195-UF Coax., Pasternack’s PE3W20410-36 low loss TNC jack bulkhead to right angle SMA plug RF cable assembly using LMR-195-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC jack to SMA plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC bulkhead cable connection on one end and a right angle reverse polarity SMA cable connection on the other. Our reverse polarity TNC to reverse polarity SMA cable assembly has a jack gender on end 1 and a plug on end 2. PE3W20410-36 can also be known as a low loss reverse polarity TNC female to right angle reverse polarity SMA male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20410-36 RF cable has a tpe jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. This PE3W20410-36 reverse polarity TNC female to reverse polarity SMA male cable assembly is built with LMR-195-UF, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W20410-36 can also be used in the other direction and will be a right angle reverse polarity SMA plug to reverse polarity TNC jack bulkhead cable assembly if the opposite connectivity is required. This low loss TNC reverse polarity female bulkhead to SMA reverse polarity right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

1 : $139.98
10 : $134.38
25 : $128.78
100 : $123.18

557

PE3W20410-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity TNC Jack Bulkhead to Reverse Polarity SMA Plug Right Angle Low Loss Cable 24 Inch Length Using LMR-195-UF Coax., Pasternack’s PE3W20410-24 low loss TNC jack bulkhead to right angle SMA plug RF cable assembly using LMR-195-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC jack to SMA plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC bulkhead cable connection on one end and a right angle reverse polarity SMA cable connection on the other. Our reverse polarity TNC to reverse polarity SMA cable assembly has a jack gender on end 1 and a plug on end 2. PE3W20410-24 can also be known as a low loss reverse polarity TNC female to right angle reverse polarity SMA male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20410-24 RF cable has a tpe jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. This PE3W20410-24 reverse polarity TNC female to reverse polarity SMA male cable assembly is built with LMR-195-UF, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W20410-24 can also be used in the other direction and will be a right angle reverse polarity SMA plug to reverse polarity TNC jack bulkhead cable assembly if the opposite connectivity is required. This low loss TNC reverse polarity female bulkhead to SMA reverse polarity right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

1 : $137.99
10 : $132.47
25 : $126.95
100 : $121.43

557

PE3W20410-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity TNC Jack Bulkhead to Reverse Polarity SMA Plug Right Angle Low Loss Cable 60 Inch Length Using LMR-195-UF Coax., Pasternack’s PE3W20410-60 low loss TNC jack bulkhead to right angle SMA plug RF cable assembly using LMR-195-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC jack to SMA plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC bulkhead cable connection on one end and a right angle reverse polarity SMA cable connection on the other. Our reverse polarity TNC to reverse polarity SMA cable assembly has a jack gender on end 1 and a plug on end 2. PE3W20410-60 can also be known as a low loss reverse polarity TNC female to right angle reverse polarity SMA male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20410-60 RF cable has a tpe jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. This PE3W20410-60 reverse polarity TNC female to reverse polarity SMA male cable assembly is built with LMR-195-UF, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W20410-60 can also be used in the other direction and will be a right angle reverse polarity SMA plug to reverse polarity TNC jack bulkhead cable assembly if the opposite connectivity is required. This low loss TNC reverse polarity female bulkhead to SMA reverse polarity right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

1 : $143.96
10 : $138.2
25 : $132.44
100 : $126.68

557

PE3C6204-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum N Male Right Angle to N Female Bulkhead Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N male right angle to N female bulkhead low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male right angle to N female bulkhead low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-NM-RA-LP type N to TC-SPP250-NF-BH-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-SPP250-NM-RA-LP N type cable connection on one end and TC-SPP250-NF-BH-LP type N bulkhead cable connection on the other. Our low PIM right angle TC-SPP250-NM-RA-LP type N to TC-SPP250-NF-BH-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-NM-RA-LP type N to TC-SPP250-NF-BH-LP N type cable is a male to female coax assembly, PE3C6204-100CM, can also be known as a low PIM right angle TC-SPP250-NM-RA-LP type N plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-NM-RA-LP N type plug to TC-SPP250-NF-BH-LP type N jack cable assembly PE3C6204-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-NM-RA-LP N cable assembly is manufactured with right angle TC-SPP250-NM-RA-LP type N to TC-SPP250-NF-BH-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-NM-RA-LP N type right angle male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6204-100CM can also be used in the other direction and will be TC-SPP250-NF-BH-LP N type female bulkhead to right angle TC-SPP250-NM-RA-LP type N male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-NM-RA-LP type N right angle plug to TC-SPP250-NF-BH-LP type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-NM-RA-LP N type to TC-SPP250-NF-BH-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-NM-RA-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male right angle to N female bulkhead low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21

PE34204-18

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-020SR, RF Cable Type: PE-020SR, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Male Right Angle Cable 18 Inch Length Using PE-020SR Coax., Radio frequency assembly SMA male to SMA male right angle cable 18 inch length using PE-020SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 18 inch length using PE-020SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34204-18, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34204-18 is built with PE-020SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34204-18 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 18 inch length using PE-020SR coax.

1 : $241.99
25 : $229.89
50 : $217.79

PE3W20416/PH45

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 1.0/2.3 Male Right Angle Cable Using LMR-195 Coax with 45 Deg. Clock. PE3W20416/PH45 is a 1.0/2.3 male right angle to 1.0/2.3 male right angle cable using LMR-195 coax. This Pasternack 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. 1.0/2.3 right angle to 1.0/2.3 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male 1.0/2.3 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20416/PH45 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20416/PH90

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 1.0/2.3 Male Right Angle Cable Using LMR-195 Coax with 90 Deg. Clock. PE3W20416/PH90 is a 1.0/2.3 male right angle to 1.0/2.3 male right angle cable using LMR-195 coax. This Pasternack 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. 1.0/2.3 right angle to 1.0/2.3 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male 1.0/2.3 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20416/PH90 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W02041LF/HS

Pasternack Enterprises

PE3W20413

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174NM, RF Cable Type: RG174 Non-Magnetic, RF Cable Impedance: 50 Ohm. MCX Jack to BNC Male Cable Using RG174 Non-Magnetic Coax. PE3W20413 is a MCX jack to BNC male cable using RG174 Non-Magnetic coax. This Pasternack MCX jack to BNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. Our jack MCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20413 MCX jack to BNC male cable assembly is constructed with RG174 Non-Magnetic coax.

PE3W20418/HS

Pasternack Enterprises

PE3W22041/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to Snap-On MMBX Plug Cable Using PE-SR405FL Coax with HeatShrink. PE3W22041/HS is a SMP male bulkhead to MMBX plug cable using PE-SR405FL coax. This Pasternack SMP male bulkhead to MMBX plug cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm MMBX for connector 2. Our male SMP bulkhead to plug MMBX cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W22041/HS SMP male bulkhead to MMBX plug cable assembly is constructed with PE-SR405FL coax.

PE3W20415

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug to SMA Male Cable Using RG405 Coax. PE3W20415 is a MMBX plug to SMA male cable using RG405 coax. This Pasternack MMBX plug to SMA male cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMBX to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20415 MMBX plug to SMA male cable assembly is constructed with RG405 coax.

PE3C2041/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. SMP Female to SMP Female Cable Using PE-P086 Coax with HeatShrink. PE3C2041/HS is a SMP female to SMP female cable using PE-P086 coax. This Pasternack SMP female to SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. Our female SMP to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2041/HS SMP female to SMP female cable assembly is constructed with PE-P086 coax.

PE3W20414

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174NM, RF Cable Type: RG174 Non-Magnetic, RF Cable Impedance: 50 Ohm. MCX Plug to MCX Plug Cable Using RG174 Non-Magnetic Coax. PE3W20414 is a MCX plug to MCX plug cable using RG174 Non-Magnetic coax. This Pasternack MCX plug to MCX plug cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. Our plug MCX to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20414 MCX plug to MCX plug cable assembly is constructed with RG174 Non-Magnetic coax.

PE3W20416LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 1.0/2.3 Male Right Angle Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3W20416LF/HS is a 1.0/2.3 male right angle to 1.0/2.3 male right angle cable using LMR-195 coax. This Pasternack 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. 1.0/2.3 right angle to 1.0/2.3 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male 1.0/2.3 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20416LF/HS 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.