264AL-AF-P08-R Price, 판매업체, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated SMA Male Right Angle to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-200-FR Coax., Radio frequency assembly fire rated SMA male right angle to N male right angle low loss cable 48 inch length using LMR-200-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated SMA male right angle to N male right angle low loss cable 48 inch length using LMR-200-FR coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle type N cable connection on the other. Our low loss right angle SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12426-48 can also be known as a low loss right angle SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W12426-48 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12426-48 can also be used in the other direction and will be right angle N type male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated SMA male right angle to N male right angle low loss cable 48 inch length using LMR-200-FR coax.

1 : $191.99
25 : $182.39
50 : $172.79
100 : $165.11

118

PE3C10326-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 4.3-10 Male Low PIM Cable 48 Inch Length Using TCOM-240 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10326-48 can also be known as a low PIM 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10326-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10326-48 is built with TCOM-240 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements.

1 : $153.99
25 : $147.83
50 : $143.21
100 : $140.13

PE3C10264

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Nickel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-75-DB, RF Cable Type: LMR-240-75-DB, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm N Male Low Loss Cable Using 75 Ohm LMR-240-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm N male to 75 Ohm N male low loss cable using 75 Ohm LMR-240-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm N male to 75 Ohm N male low loss cable using 75 Ohm LMR-240-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assembly has male gender on end 1 and male on end 2. PE3C10264 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10264 RF cable has a PE jacket of 0.240-inch diameter. The RF cable has an in-series connection. Type N plug to N type plug cable assembly PE3C10264 is built with LMR-240-75-DB which is a coax type. The Pasternack N cable assembly is manufactured with type N to type N cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a nickel body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N and N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal N to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3C6264-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum 4.3-10 Female to NEX10 Male Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 female to NEX10 male low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 female to NEX10 male low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-250-NX10M-LP NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-250-NX10M-LP NEX10 cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-250-NX10M-LP NEX10 cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-250-NX10M-LP NEX10 cable is a female to male coax assembly, PE3C6264-48, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NX10M-LP NEX10 plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NX10M-LP NEX10 plug cable assembly PE3C6264-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-250-NX10M-LP NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-250-NX10M-LP NEX10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6264-48 can also be used in the other direction and will be TC-250-NX10M-LP NEX10 male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NX10M-LP NEX10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-250-NX10M-LP NEX10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 female to NEX10 male low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $157.99
25 : $150.09
50 : $142.19
100 : $135.87

PE3W03264/SP

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to MCX Plug Right Angle Low Loss Cable Using LMR-100 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to MCX plug right angle low loss cable using LMR-100 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MCX plug right angle low loss cable using LMR-100 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03264/SP can also be known as a low loss right angle SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03264/SP RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MCX male cable assembly PE3W03264/SP is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03264/SP can also be used in the other direction and will be a right angle MCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3C6264

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum 4.3-10 Female to NEX10 Male Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 female to NEX10 male low PIM cable using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 female to NEX10 male low PIM cable using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-250-XNM-LP NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-250-XNM-LP NEX10 cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-250-XNM-LP NEX10 cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-250-XNM-LP NEX10 cable is a female to male coax assembly, PE3C6264, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-XNM-LP NEX10 plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-250-XNM-LP NEX10 plug cable assembly PE3C6264 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-250-XNM-LP NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-250-XNM-LP NEX10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6264 can also be used in the other direction and will be TC-250-XNM-LP NEX10 male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-XNM-LP NEX10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-250-XNM-LP NEX10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 female to NEX10 male low PIM cable using SPP-250-LLPL coax using Times Microwave parts.

PE3W00264

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to Water Blue FAKRA Jack Cable. PE3W00264 is a SMA female bulkhead to FAKRA jack cable using PE-C100-LSZH coax. This Pasternack SMA female bulkhead to FAKRA jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. Our female SMA bulkhead to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00264 SMA female bulkhead to FAKRA jack cable assembly is constructed with PE-C100-LSZH coax.

PE3W02646LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to SMB Plug Right Angle Cable Using RG316 Coax, RoHS. PE3W02646LF is a SMA male to SMB plug right angle cable using RG316 coax. This Pasternack SMA male to SMB plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02646LF SMA male to SMB plug right angle cable assembly is constructed with RG316 coax.

PE3W22646/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female to N Male Cable Using LMR-195 Coax with HeatShrink. PE3W22646/HS is a SMA female to N male cable using LMR-195 coax. This Pasternack SMA female to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our female SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22646/HS SMA female to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W21264LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to N Male Cable Using LMR-195-UF Coax with HeatShrink, LF Solder. PE3W21264LF/HS is a BNC male right angle to N male cable using LMR-195-UF coax. This Pasternack BNC male right angle to N male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. BNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21264LF/HS BNC male right angle to N male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C10264-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Nickel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-75-DB, RF Cable Type: LMR-240-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm N Male to 75 Ohm N Male Low Loss Cable 60 Inch Length Using 75 Ohm LMR-240-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm N male to 75 Ohm N male low loss cable 60 inch length using 75 Ohm LMR-240-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm N male to 75 Ohm N male low loss cable 60 inch length using 75 Ohm LMR-240-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assembly has male gender on end 1 and male on end 2. PE3C10264-60 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10264-60 RF cable has a PE jacket of 0.240-inch diameter. The RF cable has an in-series connection. Type N plug to N type plug cable assembly PE3C10264-60 is built with LMR-240-75-DB which is a coax type. The Pasternack N cable assembly is manufactured with type N to type N cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a nickel body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal N to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $96.99
10 : $95.05
25 : $93.11
100 : $91.17

PE3W12643

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Male to Black FAKRA Jack Cable Using RG174 Coax. PE3W12643 is a BNC male to FAKRA jack cable using RG174 coax. This Pasternack BNC male to FAKRA jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm FAKRA for connector 2. Our male BNC to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12643 BNC male to FAKRA jack cable assembly is constructed with RG174 coax.

PE3W13264-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. 7/16 DIN Female Bulkhead to 7/16 DIN Female Bulkhead Low Loss Cable 300 Inch Length Using LMR-400-UF Coax., Radio frequency assembly 7/16 DIN female bulkhead to 7/16 DIN female bulkhead low loss cable 300 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN female bulkhead to 7/16 DIN female bulkhead low loss cable 300 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 7/16 DIN bulkhead cable connection on one end and a 7/16 DIN bulkhead cable connection on the other. Our low loss 7/16 DIN to 7/16 DIN cable assembly has a female gender on end 1 and a female on end 2. PE3W13264-300 can also be known as a low loss 7/16 DIN jack to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13264-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our bulkhead 7/16 DIN female to bulkhead 7/16 DIN female cable has a maximum VSWR of 1.323:1. 7/16 DIN jack to 7/16 DIN jack cable assembly PE3W13264-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. This RF cable assembly features 2700 Vdc max DC voltage. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss 7/16 DIN jack bulkhead to 7/16 DIN jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $371.99
10 : $364.55
25 : $357.11
100 : $349.67

PE3C2645LF/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMB Plug Right Angle to N Male Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMB plug right angle to N male low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug right angle to N male low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMB cable connection on one end and a type N cable connection on the other. Our low loss right angle SMB to type N cable assembly has a plug gender on end 1 and a male on end 2. PE3C2645LF/HS-36 can also be known as a low loss right angle SMB male to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2645LF/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMB plug to type N male cable has a maximum VSWR of 1.4:1. SMB male to type N plug cable assembly PE3C2645LF/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2645LF/HS-36 can also be used in the other direction and will be a type N male to right angle SMB plug cable assembly if the opposite connectivity is required. Low loss SMB right angle male to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to type N cable assembly for quick shipment worldwide. Variations of SMB and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $66.99
25 : $63.64
50 : $60.29
100 : $57.61

PE3W02640-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable 6 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has female gender on end 1 and female on end 2. PE3W02640-6 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA jack to SMP jack cable assembly PE3W02640-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W02640-6 RF cable are available on our downloadable PDF datasheet.PE3W02640-6 can also be used in the other direction and will be right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

Venkel Ltd.

TFCR0402-16W-E-2642FT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;26.4K;�1%
RoHS : Compliant

TFCR0402-16W-K-2640BT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;264R;�0.1%
RoHS : Compliant

TFCR0402-16W-K-2641DT

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;2.64K;�0.5%
RoHS : Compliant

TFCR0603-16W-C-2642FT

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;26.4K;�1%
RoHS : Compliant

TFCR0603-16W-E-2640FT

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;264R;�1%
RoHS : Compliant

TFCR0603-16W-K-2643DT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�100PPM;264K ;�0.5%
RoHS : Compliant

TFCR0805-10W-C-2643BT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;264K ;�0.1%
RoHS : Compliant

TFCR0805-10W-K-2642FT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;26.4K;�1%
RoHS : Compliant

TFCR0805-8W-C-2642BT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;26.4K;�0.1%
RoHS : Compliant

TFCR0805-8W-C-2642CT

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;26.4K;�0.25%
RoHS : Compliant

TFCR0805-8W-E-2640CT

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;264R;�0.25%
RoHS : Compliant

TFCR0805-8W-E-2641CT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;2.64K;�0.25%
RoHS : Compliant

TFCR0805-8W-K-2641BT

VENKEL LTD

Thin Film CR;0805;1/8W;�100PPM;2.64K;�0.1%
RoHS : Compliant

TFCR0805-8W-K-2642FT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�100PPM;26.4K;�1%
RoHS : Compliant

TFCR1206-4W-C-2643CT-1K

VENKEL LTD

Thin Film CR;1206;1/4W;�50PPM;264K ;�0.25%
RoHS : Compliant

Win Source Electronics

RR264M-400TR

ROHM Semiconductor

DIODE GEN PURP 400V 700MA PMDU
RoHS : Compliant

7,715 : $0.0389
5,775 : $0.0433
4,465 : $0.0448
3,240 : $0.0463
2,095 : $0.0478
860 : $0.0583

152,600

TLC2264CDR

Texas Instruments

IC OPAMP GP 730KHZ RRO 14SOIC
RoHS : Compliant

245 : $1.2377
185 : $1.3805
145 : $1.4281
105 : $1.4757
70 : $1.5233
30 : $1.8565

71,382

CC2642R1FRGZT

Texas Instruments

IC RF TXRX+MCU BLE 5.2 48VQFN / IC RF TxRx + MCU Bluetooth Bluetooth v5.2 2.4GHz 48-VFQFN Exposed Pad
RoHS : Compliant

189 : $1.7828
151 : $1.8553
117 : $1.9277
82 : $2.0727
53 : $2.1451
25 : $2.2902

33,430

TLE4264G

Infineon Technologies AG

LINEAR VOLTAGE REGULATOR
RoHS : Compliant

163 : $1.8497
130 : $1.9249
100 : $2.0
70 : $2.1504
45 : $2.2256
22 : $2.376

27,190

CC2640R2FRHBR

Texas Instruments

IC RF TXRX+MCU BLUETOOTH 32VFQFN / IC RF TxRx + MCU Bluetooth Bluetooth v5.0 2.4GHz 32-VFQFN Exposed Pad
RoHS : Compliant

122 : $2.477
91 : $2.7628
70 : $2.8581
51 : $2.9533
33 : $3.0486
14 : $3.7155

27,050

AON7264E

Alpha & Omega Semiconductor

MOSFET N-CHANNEL 60V 28A 8DFN
RoHS : Compliant

2,285 : $0.1473
1,830 : $0.1532
1,410 : $0.1593
985 : $0.1711
635 : $0.1772
300 : $0.1892

17,885

TPS26400PWPR

Texas Instruments

RoHS : Compliant

132 : $2.2876
98 : $2.5515
76 : $2.6395
55 : $2.7275
36 : $2.8154
15 : $3.4313

9,410

USB2642-I/ML

Microchip Technology Inc

IC INTERFACE SPECIALIZED 48QFN / Controller Interface 48-QFN (7x7)
RoHS : Compliant

42 : $7.2933
31 : $8.1348
24 : $8.4153
18 : $8.6959
12 : $8.9764
5 : $10.9399

8,486

ST72F264G2M6

STMicroelectronics

IC MCU 8BIT 8KB FLASH 28SOIC
RoHS : Compliant

55 : $5.5152
41 : $6.1516
32 : $6.3637
23 : $6.5758
15 : $6.7879
7 : $8.2728

6,583

LTC2641CMS8-16#TRPBF

Linear Technology

IC DAC 16BIT VOUT 8-MSOP
RoHS : Compliant

71 : $4.738
53 : $5.2847
41 : $5.4671
30 : $5.6493
20 : $5.8315
8 : $7.1071

6,200

LTC2641IMS8-16#TRPBF

Linear Technology

IC DAC 16BIT VOUT 8-MSOP
RoHS : Compliant

12 : $27.1933
9 : $30.331
7 : $31.3769
5 : $32.4228
3 : $33.4687
2 : $40.7899

5,140

LTC2642CMS-16#TRPBF

Linear Technology

IC DAC 16BIT V-OUT 10MSOP
RoHS : Compliant

19 : $16.431
14 : $18.3269
11 : $18.9589
8 : $19.5908
5 : $20.2228
3 : $24.6465

4,630

LM26420Q1XSQX/NOPB

Texas Instruments

IC REG BUCK ADJ 2A DL 16WQFN
RoHS : Compliant

260 : $1.1732
195 : $1.3086
150 : $1.3537
110 : $1.3988
70 : $1.4439
30 : $1.7598

4,530

LTC2641CMS8-12#PBF

Linear Technology

IC DAC 12BIT VOUT 8-MSOP / DAC 1-CH Segment 12-bit 8-Pin MSOP Tube
RoHS : Compliant

22 : $13.6612
17 : $15.2374
13 : $15.7629
10 : $16.2883
6 : $16.8137
3 : $20.4917

1,270

LTC2642AIDD-16#PBF

Analog Devices Inc

IC DAC 16BIT V-OUT 10DFN / 16 Bit Digital to Analog Converter 1 10-DFN (3x3)
RoHS : Compliant

10 : $31.6175
8 : $35.2657
6 : $36.4817
4 : $37.6978
3 : $38.9138
2 : $47.4262

666

Wuhan P&S

NCV4264-2CST33T3G

onsemi

RoHS : Compliant

1 : $1.4
100 : $0.9
500 : $0.74
1,000 : $0.68

16,000

NCV4264-2CST50T3G

onsemi

100mA,5.0V,LDO,Linear Voltage Regulator
RoHS : Compliant

1 : $1.5
100 : $0.96
500 : $0.79
1,000 : $0.73

7,000

264AL-AF-P08-R 판매업체

링크 URL