| 전자부품 데이터시트 검색엔진 |
|
3512-3HT1-R 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
![]() Microchip Technology Inc | R35120 | Microchip Technology Inc | Std Rectifier _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 411 | |
| S35120 | Microchip Technology Inc | Std Rectifier _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 192 | ||
| 1N3512A | Microchip Technology Inc | Voltage Regulator _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| VX-805-0035-122M880000TR | Microchip Technology Inc | VX-805-0035-122M880000TR, LDFN, Projected EOL: 2050-11-02 RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | REF35120YBHR | Texas Instruments | RoHS : Compliant | 63,179 | ||
| REF35125QDBVRQ1 | Texas Instruments | RoHS : Compliant | 51,529 | |||
TPS73512DRBT![]() | Texas Instruments | TPS73512DRBT , LDO 电压调节器, 1720mA, 1.2 V输出 3%, 2.7 → 6.5 V输入, 8针 SON封装 RoHS : Compliant | 3,133 | |||
![]() ComSIT USA | 23512 | SAINT-GOBAIN | AVAILABLE EU | 857 | ||
| XY2500FF3512P | AVAILABLE EU | 375 | ||||
| 17 35 125 2102 | HARTING ELEKTRONIK | AVAILABLE EU | 158 | |||
![]() NexGen Digital | NE3512S02-A | NEC Electronics Group | 210 | |||
![]() PEI Genesis | 5617635-120 | SOURIAU-SUNBANK |
| 0 | ||
| SE11F1506-3.5-12S | SOURIAU-SUNBANK |
| 0 | |||
| HT7035-12-6-8 | HellermannTyton |
| 0 | |||
| SE1N6110E-3.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| SE6C1608A3.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| 23A03351-2 | SOURIAU-SUNBANK |
| 0 | |||
| DAM53512-2993 | ITT Interconnect Solutions |
| 0 | |||
| 8472.G6.5943.51.23.61 | Trafag Sensors and Controls |
| 0 | |||
| SE16A3512A2.0R34 | SOURIAU-SUNBANK |
| 0 | |||
| DAM53512-2994 | ITT Interconnect Solutions |
| 0 | |||
| S3684UR3512A1.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| SE2C2212-3.5-12N | SOURIAU-SUNBANK |
| 0 | |||
| SE91E12C3.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| 10-407035-125 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| SE1C3106E-3.5-12 | SOURIAU-SUNBANK |
| 0 | |||
![]() Richardson RFPD | REC3.5-1205DRW/R10/C![]() | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 5V/-5V 0.35A/-0.35A 3.5W RoHS : Compliant |
| 0 | |
| 908-35-1-28-2-B-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant | 0 | |||
| ML03512R1AAT2A | Kyocera AVX Components | MLO CAPACITOR RoHS : Compliant | 0 | |||
REC3.5-1205SRW/R10/C/X1![]() | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 5V 0.7A 3.5W 9-Pin DIP Tu RoHS : Compliant |
| 0 | ||
REC3.5-1215SRW/R8/C/X1![]() | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 15V 0.233A 3.5W 9-Pin DIP RoHS : Compliant |
| 0 | ||
REC3.5-1212DRW/R10/C![]() | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 12V/-12V 0.145A/-0.145A 3 RoHS : Compliant |
| 0 | ||
REC3.5-1215SRW/R10/A/CTRL![]() | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 15V 0.233A 3.5W 7-Pin DIP RoHS : Compliant |
| 0 | ||
REC3.5-1215SRW/R10/A/CTRL/X1![]() | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 15V 0.233A 3.5W 7-Pin DIP RoHS : Compliant |
| 0 | ||
ML03512R5AAT2A![]() | Kyocera AVX Components | Cap Ceramic 2.5pF 50V C0G 0.05pF Pad Flat With Con RoHS : Compliant |
| 0 | ||
| PSAQF-30T3512P | Wall Industries Inc | Chassis Mount DC/DC Converter | 0 | |||
REC3.5-1212DRW/R10/A/X1![]() | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT -12V/12V -0.145A/0.145A 3 RoHS : Compliant |
| 0 | ||
REC3.5-1215DRW/R8/A/X1![]() | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 15V/-15V 0.117A/-0.117A 3 RoHS : Compliant |
| 0 | ||
REC3.5-1212SRW/R10/A![]() | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 12V 0.29A 3.5W 6-Pin DIP RoHS : Compliant |
| 0 | ||
| MT3512A | Microchip Technology Inc | Diode Rectifier Bridge Single 1.2KV 35A 5-Pin Case RoHS : Not Compliant | 0 | |||
REC3.5-1212DRW/R8/A/CTRL![]() | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 12V/-12V 0.145A/-0.145A 3 RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 01772-03512 | AVDEL | INSTOCK | 189,148 | ||
| CP35-12-P3V00-LF | INSTOCK | 2,011 | ||||
| 222237351224 | INSTOCK | 1,989 | ||||
| SL351290F24VS | INSTOCK | 1,250 | ||||
| 48535124SMAA | INSTOCK | 900 | ||||
| K35 12MM | INSTOCK | 672 | ||||
| 60013512A01C | National Semiconductor Corporation | INSTOCK | 250 | |||
| TFM-135-12-S-D-A-P-TR | Samtec Inc | INSTOCK RoHS : Compliant | 115 | |||
| 932 351-200 | Hirschmann Electronics GmbH & Co Kg | INSTOCK | 56 | |||
| 1835122 | INSTOCK | 50 | ||||
| BL3.5/12SNOR | INSTOCK | 40 | ||||
| 715P473512MD3 | Vishay Sprague | INSTOCK RoHS : Compliant | 30 | |||
DSAI35-12A![]() | IXYS Corporation | INSTOCK RoHS : Compliant | 8 | |||
| RK80532KE083512 | INSTOCK | 2 | ||||
| HM3512E-P1 | INSTOCK | 1 | ||||
![]() Avnet Asia | 0783512044 | Molex | (Alt: 0783512044) RoHS : Compliant | 1,100 | ||
| LG Q976.01-MGNI-35-1-20-R18 | ams OSRAM Group | (Alt: LG Q976.01-MGNI-35-1-20-R18) RoHS : Compliant | 0 | |||
| LB Y1SG-T1U2-35-1-20-R18-Z | ams OSRAM Group | LED Single Chip Blue 470nm 30mA 2-Pin SMD T/R (Alt: LB Y1SG-T1U2-35-1-20-R18-Z) RoHS : Compliant | 0 | |||
| LB TTSD-S1T2-35-1-20-R18-Z-SV | ams OSRAM Group | OOSLB TTSD-S1T2-35-1-20-R18-Z-SV Q65111A (Alt: LB TTSD-S1T2-35-1-20-R18-Z-SV) RoHS : Compliant | 0 | |||
| 4-5353512-5 | TE Connectivity | Conn Board to Board F 40 POS 0.5mm Solder ST SMD T/R (Alt: 4-5353512-5) RoHS : Compliant | 0 | |||
| 0022035125 | Molex | Pin Header, 12 Contacts, 1 Row, 2.5mm, Tin, 3A, Straight, Shrouded, Brass, Wire-to-Board, THT (Alt: 0022035125) RoHS : Compliant | 0 | |||
| OCP0S3512Q-A0 | Kingston Technology Company | (Alt: OCP0S3512Q-A0) RoHS : Compliant | 0 | |||
| LB P4SG-S2U1-35-1-20-R18F-Z | ams OSRAM Group | LED Single Chip Blue 470nm 20mA 2-Pin SMD T/R (Alt: LB P4SG-S2U1-35-1-20-R18F-Z) RoHS : Compliant | 0 | |||
| LB P4SG-T1U2-35-1-20-R18F-Z | ams OSRAM Group | LED Single Chip Blue 470nm 20mA 2-Pin SMD T/R (Alt: LB P4SG-T1U2-35-1-20-R18F-Z) RoHS : Compliant | 0 | |||
| FNA23512A | onsemi | Intelligent Power Module, 1200 V, 35A (Alt: FNA23512A) RoHS : Compliant | 0 | |||
| 0035.1281 | Schurter Electronic Components | (Alt: 0035.1281) RoHS : Compliant | 0 | |||
| NFVA23512NP2T | onsemi | Intelligent Power Module (IPM), AEC-Q & AQG324, Automotive, Inverter 1200V (Alt: NFVA23512NP2T) RoHS : Compliant | 0 | |||
| LB P4SG-T1U1-35-1-20-R18F-Z | ams OSRAM Group | (Alt: LB P4SG-T1U1-35-1-20-R18F-Z) RoHS : Compliant | 0 | |||
| NFAM3512L7B | onsemi | Intelligent Power Module, SPM31, 1200V, 35A (Alt: NFAM3512L7B) RoHS : Compliant | 0 | |||
| 2536351-2 | TE Connectivity | (Alt: 2536351-2) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | FRHE35121-MR-10 | embedded antenna design (ead) | Rhea with 100mm cable and MMCX RA |
| 1 | |
| FRHE35121-MR-50 | embedded antenna design (ead) | Rhea antenna with 500mm / RG178 and MMCX RA |
| 0 | ||
| AMES35-12SNZ-PQ | Aimtec | RoHS : Compliant |
| 0 | ||
| IP293512-1 | DB Unlimited | Piezo Indicator |
| 0 | ||
| FBUF35120-UF-15 | embedded antenna design (ead) | BUF2400 2.4GHz Captive Antenna w/flying lead |
| 0 | ||
| AMES35-12SNZ-P | Aimtec | RoHS : Compliant |
| 0 | ||
![]() Chip-Germany GmbH | C9900-K435 128079 | Beckhoff Automation GmbH | 1 | |||
| C9900-K535 129179 | Becmer | 1 | ||||
![]() Component Electronics, Inc | 2306-221-23512 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,000 | |
| 2306-198-23512 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 3,973 | ||
| 351-236-01S-P29 | Conesys | IN STOCK SHIP TODAY | 1,466 | |||
| 351-216-01S-P29 | Conesys | IN STOCK SHIP TODAY | 1,385 | |||
| 351-234-01S-P29 | Conesys | IN STOCK SHIP TODAY | 1,280 | |||
| PG11M/CU-3512F17 | PPC Products Corp | IN STOCK SHIP TODAY | 990 | |||
| AD3512LB-G50-LF | ADDA USA Corporation | IN STOCK SHIP TODAY |
| 72 | ||
| 2-353512-0 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 17 | ||
PWR263S-35-1200F![]() | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 15 | ||
| 495-351-20250 | Amphenol Corporation | IN STOCK SHIP TODAY | 13 | |||
| PCF8574AT/3-512 | NXP Semiconductors | IN STOCK SHIP TODAY |
| 12 | ||
| HC3512SA | Hubbell Premise Wiring | IN STOCK SHIP TODAY | 8 | |||
| P35120100A010G | BB Battery | IN STOCK SHIP TODAY |
| 3 | ||
| 25.135.1253.0 | Wieland Electric GmbH | IN STOCK SHIP TODAY | 3 | |||
| PE3512/00 | Philips Semiconductors | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | A7-10-351-20 | Southco | RoHS : Compliant |
| 2,572 | |
| RRH-35-12-40 | Essentra Components | 0 | ||||
| D5-PC35-12ZBTNA | Southco | D5-PC35-12ZBTNA | 0 | |||
| FHL-M3.5-12ZI | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| MP-01-103-512 | Southco | 0 | ||||
| RRH-35-12-50 | Essentra Components | 0 | ||||
| BSOA-M3.5-12 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.When blind-threaded types are used outer sheet surfaces are not only flush but closed as | 0 | |||
| 62-421-351-2 | Southco | 0 | ||||
| 47-80-351-22 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| FH-M3.5-12ZI | PennEngineering (PEM) | STUD, FLUSH, STEEL M3.5THREAD | 0 | |||
| RFS2-35-12-A5 | Essentra Components | 0 | ||||
| E5-2-035-121 | Southco | E5-2-035-121 | 0 | |||
| 035123111303 | Essentra Components | 0 | ||||
| E5-8-135-121 | Southco | E5-8-135-121 | 0 | |||
| 12SWS3512B | Essentra Components | SHOULDER WASHER, .385 ID, .872 | 0 | |||
![]() EBV Elektronik | MP-2835-12D2-40-80 | Luminus Devices | (Alt: MP-2835-12D2-40-80) RoHS : Compliant | 824,000 | ||
| MP-2835-1200-B | Luminus Devices | (Alt: MP-2835-1200-B) RoHS : Compliant | 28,000 | |||
| MP-2835-12D2-40-80-E2-ZA-M3 | Luminus Devices | 2835 Mid Power LED CCT4000K CRI80 (Alt: MP-2835-12D2-40-80-E2-ZA-M3) RoHS : Compliant | 12,000 | |||
| FDC3512 | onsemi | NChannel PowerTrench MOSFET 80V 30A 77mO (Alt: FDC3512) RoHS : Compliant | 3,000 | |||
| FNA23512A | onsemi | Intelligent Power Module 1200 V 35A (Alt: FNA23512A) RoHS : Compliant | 6 | |||
| MP-2835-12D2-40-90 | Luminus Devices | (Alt: MP-2835-12D2-40-90) RoHS : Compliant | 0 | |||
| MP-2835-12D2-30-90 | Luminus Devices | (Alt: MP-2835-12D2-30-90) RoHS : Compliant | 0 | |||
| MP-2835-12D2-65-80 | Luminus Devices | (Alt: MP-2835-12D2-65-80) RoHS : Compliant | 0 | |||
| MP-2835-120K-40-90 | Luminus Devices | (Alt: MP-2835-120K-40-90) RoHS : Compliant | 0 | |||
| MP-2835-120K-65-90 | Luminus Devices | (Alt: MP-2835-120K-65-90) RoHS : Compliant | 0 | |||
| MP-2835-12FY-65-90 | Luminus Devices | (Alt: MP-2835-12FY-65-90) RoHS : Compliant | 0 | |||
| 2PS13512E43W35222NOSA1 | Infineon Technologies AG | IGBT Stack For Various Inverter Application (Alt: SP000861944) RoHS : Not Compliant | 0 | |||
| LBY1SG-T1U2-35-1-20-R18-Z | ams OSRAM Group | LED Single Chip Blue 470nm 30mA 2Pin SMD TR (Alt: Q65113A3369) RoHS : Compliant | 0 | |||
| GWJCLPS2.EM-H3H8-A535-1-2 | ams OSRAM Group | LED Chip Neutral White 4000K 150mA 2Pin SMD TR (Alt: Q65112A8483) RoHS : Compliant | 0 | |||
| MP-2835-12D2-30-80-E1-ZA-M3 | Luminus Devices | 2835 Mid Power LED CCT3000K CRI80 (Alt: MP-2835-12D2-30-80-E1-ZA-M3) RoHS : Compliant | 0 | |||
![]() ECCO | RMW-35/12-100/ADH-0 | TE Connectivity |
| 2 | ||
![]() Flip Electronics | FDS3512 | onsemi | Stock, Ship Today RoHS : Compliant |
| 15,000 | |
EPM3512AFC256-10![]() | Altera Corporation | Stock RoHS : Not Compliant | 3,113 | |||
EPM3512AFC256-10N![]() | Altera Corporation | Stock, Ship Today RoHS : Compliant |
| 3,113 | ||
| SII3512ECTU128 | Lattice Semiconductor Corporation | Stock, Ship Today RoHS : Compliant | 1,153 | |||
| NFAL3512L5BT | onsemi | Stock, Ship Today RoHS : Compliant |
| 456 | ||
| NFVA23512NP2T | onsemi | Stock, Ship Today RoHS : Compliant |
| 24 | ||
| BLS6G3135-120,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 10 | |||
![]() Maritex | LRS-35-12 | Mean Well | Power Supply; module; 36W; 12V; 3A; 85-264VAC; 120-373VDC RoHS : Compliant |
| 4,297 | |
| CP3512S0010 | Cvilux Corporation | Crimp terminal housing; pitch 3.00mm; 12-contacts [2x6]; female; 2 rows; applicable wire AWG#20-24; 250V/5A RoHS : Compliant |
| 1,780 | ||
| LPV-35-12 | Mean Well | Power Supply; LED; 36W; 12V; 3A; 90-264VAC; 127-370VDC; IP67 RoHS : Compliant |
| 1,746 | ||
| JS-1135-12 | Chyao Shiunn Electronic Industrial Ltd | Header for PCB; pitch 2.50mm; 12-contacts; THT; male; top entry; 250V/3A |
| 1,143 | ||
| CP3512P1H00-LF | Cvilux Corporation | Header for PCB; pitch 3.00mm; 12-contacts [2x6]; THT; male; side entry; 2 rows; 250V/5A RoHS : Compliant |
| 1,088 | ||
| CP3512P0010 | Cvilux Corporation | Crimp terminal housing; pitch 3.00mm; 12-contacts [2x6]; male; 2 rows; applicable wire AWG#20-24; 250V/5A RoHS : Compliant |
| 1,015 | ||
| SCP-35-12 | Mean Well | Power Supply; module; 35.9W; 13.8V; 2.6A; 85-264VAC; 120-370VDC RoHS : Compliant |
| 1,011 | ||
| IWS-P3512-CW-K1 | ITSWELL | LED mid-power; SMD; 3528 PLCC2; cool white; 8000-15000K; 17-29lm/100mA; 2.8-3.6V; diffused; 130 degrees; 3.54x2.8x0.80mm |
| 375 | ||
| P13512+ LN | BEISIT | Cabel Gland PG13.5; nylon; PG13.5 5-9.00mm; Flat O-ring; with lock nut; grey; for wrench 24 |
| 100 | ||
| CLEDA351202 | LEDCONN | LED connector; SMD; Number of contacts: 2; load capacity 1A; voltage 250V |
| 95 | ||
| EPS-35-12 | Mean Well | Power supply; 36W; 12V; 3A; 85-264VAC; 120-370VDC RoHS : Compliant |
| 50 | ||
PCF8574T/3,512![]() | NXP Semiconductors | I/O Port Expanders; PCF8574T/3,512; NXP SEMICONDUCTORS; 16 RoHS : Compliant |
| 46 | ||
| GLAND-P13512GR-LN-CT | CONNTHERM | Cabel Gland PG13.5; nylon; PG13.5 6-12mm; Flat O-ring; with lock nut; grey |
| 30 | ||
| CP3512P1V00-LF | Cvilux Corporation | Header for PCB; pitch 3.00mm; 12-contacts [2x6]; THT; male; top entry; 250V/5A RoHS : Compliant |
| 2 | ||
| NID35-12 | Mean Well | DC/DC converter; 34.8W; 12V; 0-2.9A; 20-53VDC RoHS : Compliant |
| 1 | ||
![]() Master Electronics | 742C083512JP | CTS Corporation | Res Thick Film Array 5.1K Ohm 5% 0.25W(1/4W) ±200ppm/°C ISOL Molded 8-Pin 1206(4 X 0603) Concave SMD T/R RoHS : Compliant |
| 25,000 | |
| 3512 | Switchcraft Conxall | SHUNTED PHONO JAX RoHS : Not Compliant |
| 78 | ||
| 2-1803512-8 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 2-2005351-2 | TE Connectivity | SUNROOF 11P CAP ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| CA3-B2-24-635-12D-D | Carling Technologies | CA3B22463512DD RoHS : Compliant |
| 0 | ||
| AFB03512HA-CR00 | Delta Thermal Inc | Axial Square-35mm L x 35mm H x10 mm W 12VDC 3 Wire Leads Locked Rotor Sensor RoHS : Compliant |
| 0 | ||
| IEGH66-35127-2-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| IEGH66-35127-24-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| DW-35-12-F-D-715 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-35-12-F-D-760 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-35-12-F-S-530 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-35-12-F-T-700 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-35-12-L-S-585 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-35-12-L-S-710 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-08-09-S-S-351-287 | Samtec Inc | High Temperature Flexible Board Stacking Header 0.100 Pitch RoHS : Compliant |
| 0 | ||
![]() Neutron USA | PWR263S-35-1200FE | Bourns Inc | Thick Film Resistors - SMD 1% TOL 120 Ohm AEC-Q200 RoHS : Compliant |
| 50 | |
| T4113512041-000 | TE Connectivity | M12 M 4P GOLD D.CODE RA SHIELDED PG9 RoHS : Compliant |
| 50 | ||
| 273-5-120 | Time Mark Corporation | Current Monitoring Relay, 120 VAC, 5 A, SPDT, 240 VAC, 8-Pin Octal, 273 Series |
| 19 | ||
REC3.5-1212SRW/R8/C![]() | RECOM Power GmbH | Isolated DC/DC Converter, 3.5W DC/DC 8kV REG 12Vin 12Vout RoHS : Compliant |
| 10 | ||
| R4N-2014-23-5120-WT | Altech Corporation | Industrial Relays Industrial relay, 4PDT RoHS : Compliant |
| 7 | ||
| P7-535121 | OTTO Engineering Inc | Basic / Snap Action Switches Standard Sldr 5A SPST-DB, SPDT-DB |
| 2 | ||
| R2N-2012-23-5120-WTL | Altech Corporation | Industrial Relays RoHS : Compliant |
| 1 | ||
| AFB03512HA-AF00 | Delta Electronics Inc | DC Fans 35x35x10mm 12V DC 1.08W, 5.5CFM 22dB, Tach |
| 0 | ||
| CFM-6025BF-250-351-20 | CUI Inc | DC Fan, sq0x25 mm, 24 Vdc 0.11A, ball, 5000 RPM, 23.95 CFM, 35.2dB(A),TS, 3wire |
| 0 | ||
| LP3-V12L3512 | OTTO Engineering Inc | Pushbutton Switches Illuminated Pushbutton Switch- Vandal Resistent RoHS : Compliant |
| 0 | ||
| 3273512 | Phoenix Contact | Distribution Block, 1 level19-Conn, Push-in, 12AWG, 450V, 24A, PTFIX 6/18X2,5-G GN RoHS : Compliant |
| 0 | ||
| AFB03512HA-AR00 | Delta Electronics Inc | DC Fans 35x35x10mm 12V DC Fan w/ Speed Sensor (Lock) |
| 0 | ||
| KVR100X64C3/512 | Kingston Technology Company | 512MB 64X64 PC100 SDRAM 100MHZ NON ECC DIMM CL3 RoHS : Unknown |
| 0 | ||
| LP3-V13P3512 | OTTO Engineering Inc | Pushbutton Switches Illuminated Pushbutton Switch- Vandal Resistent RoHS : Compliant |
| 0 | ||
| AD3512HB-G50-LF | ADDA USA Corporation | DC Fans Axial Fan, 35x35x10mm, 12VDC, 7.2CFM, 1.32W, 37.6dBA, 0.174"H2O, Ball, Lead Wire |
| 0 | ||
![]() Pasternack Enterprises US | PE3C3512LF-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using RG188-DS Coax, LF Solder., Radio frequency assembly BNC male to BNC male cable 48 inch length using RG188-DS coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable 48 inch length using RG188-DS coax, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3512LF-48 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C3512LF-48 is built with RG188-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using RG188-DS coax, LF solder. |
| 338 | |
| PE3W11035-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 120 inch length using LMR-400-UF coax, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3W11035-120 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3W11035-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 120 inch length using LMR-400-UF coax. |
| 164 | ||
| PE3C3512-24 | Pasternack Enterprises |
| 64 | |||
| PE3C10335-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to 7/16 DIN Male Low PIM Cable 12 Inch Length Using TCOM-240 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 7/16 DIN male low PIM cable 12 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 7/16 DIN male low PIM cable 12 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10335-12 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10335-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10335-12 is built with TCOM-240 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10335-12 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 15 | ||
| PE3M0435-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 16, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 16, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: M17/113-RG316, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. MIL Size 16 Contact Pin to MIL Size 16 Contact Socket Cable, D38999 Series I, III, IV, 12 Inch Length Using M17/113-RG316. The PE3M0435-12 from Pasternack is a D38999 contact cable assembly that is built with a size 16 M39029 pin contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 700 MHz. The PE3M0435-12 RF cable has a FEP jacket of 0.980-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0435-12 in-series RF cable has 0.5 inches of repeated minimum bend radius. M39029 pin to M39029 socket cable assembly is built with M17/113-RG316, which is a flexible coax type. The Pasternack PE3M0435-12 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 6 | ||
| PE3512/HS | Pasternack Enterprises | 0 | ||||
| PE3835-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Female Bulkhead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 12 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3835-12, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3835-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3835-12 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 12 inch length using RG316 coax. |
| 0 | ||
| PE35121-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. 3.5mm Male to 3.5mm Female Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to 3.5mm female cable 12 inch length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to 3.5mm female cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a male to female coax assembly, PE35121-12, can also be known as a 3.5mm plug to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm jack cable assembly PE35121-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm male to 3.5mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35121-12 can also be used in the other direction and will be 3.5mm female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to 3.5mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 3.5mm female cable 12 inch length using PE-SR402FL coax. |
| 0 | ||
| PE3512LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Right Angle Cable 48 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle cable 48 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 48 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3512LF-48, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3512LF-48 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3512LF-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 48 inch length using RG142 coax, RoHS. |
| 0 | ||
| PE3C1935-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to N Female Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly TNC male to N female low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to N female low loss cable 12 inch length using LMR-195 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and type N cable connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C1935-12 can also be known as a low loss TNC plug to N type jack cable assembly and will be shipped same-day as it is purchased. TNC plug to type N jack cable assembly PE3C1935-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1935-12 can also be used in the other direction and will be type N female to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female low loss cable 12 inch length using LMR-195 coax. |
| 0 | ||
| PE3512-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Male Right Angle Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly SMA male to SMA male right angle cable 60 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 60 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3512-60, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3512-60 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3512-60 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 60 inch length using RG142 coax. |
| 0 | ||
| PE3512-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Right Angle Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly SMA male to SMA male right angle cable 48 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 48 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3512-48, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3512-48 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3512-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 48 inch length using RG142 coax. |
| 0 | ||
| PE3C3935-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug to SMA Female Bulkhead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly MMCX plug to SMA female bulkhead cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to SMA female bulkhead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and SMA bulkhead cable connection on the other. Our MMCX to SMA cable assembly has plug gender on end 1 and female on end 2. PE3C3935-12 can also be known as a MMCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. MMCX male to SMA jack cable assembly PE3C3935-12 is built with RG316 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C3935-12 RF cable are available on our downloadable PDF datasheet.PE3C3935-12 can also be used in the other direction and will be SMA female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6351-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 24 inches. Fire Rated 4.3-10 Female to N Male Low PIM Cable 24 Inch Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 female to N male low PIM cable 24 inch length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 female to N male low PIM cable 24 inch length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-250-NM-LP N type cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP N type cable is a female to male coax assembly, PE3C6351-24, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly PE3C6351-24 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-250-NM-LP N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6351-24 can also be used in the other direction and will be TC-250-NM-LP type N male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 female to N male low PIM cable 24 inch length using SPF-250 coax using Times Microwave parts. |
| 0 | ||
| PE3512LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male to SMA Male Right Angle Cable 72 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle cable 72 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 72 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3512LF-72, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3512LF-72 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3512LF-72 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 72 inch length using RG142 coax, RoHS. |
| 0 | ||
![]() TE Connectivity | T4133512041-000 | TE Connectivity | M12,FRONT MOUNT,FEMALE,D,4P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 4 18 | M12 Panel Mount Solder Cup | Part Number: T4133512041-000 | Internal Number: T4133512041-000 | TE Connectivity RoHS : Compliant |
| 566 | |
| T4133512051-000 | TE Connectivity | M12,FRONT MOUNT,FEMALE,D,5P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 5 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 5 18 | M12 Panel Mount Solder Cup | Part Number: T4133512051-000 | Internal Number: T4133512051-000 | TE Connectivity RoHS : Compliant |
| 242 | ||
| KUP-14A35-120 | TE Connectivity | KUP-14A35-120=KU Relay & Contactor Type: General Purpose Power Relay Current Type: AC Coil Magnetic System: Monostable Contact Arrangement: 3 Form C 3PDT-CO Contact Current Rating: 10 A General Purpose Power Relay AC Monostable 3 Form C 3PDT-CO | Electromechanical Relay | Part Number: KUP-14A35-120 | Internal Number: 8-1393117-7 | TE Connectivity RoHS : Compliant |
| 152 | ||
| T4133512021-000 | TE Connectivity | M12,FRONT MOUNT,FEMALE,D,2P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 2 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 2 18 | M12 Panel Mount Solder Cup | Part Number: T4133512021-000 | Internal Number: T4133512021-000 | TE Connectivity RoHS : Compliant |
| 90 | ||
| T1739035120-000 | TE Connectivity | H3A-MTGVB-M20-EMC Hood & Base Connector Product Type: Base Housing Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1739035120-000 | Internal Number: T1739035120-000 | TE Connectivity RoHS : Compliant |
| 67 | ||
![]() Venkel Ltd. | TRCR0603-512MT | VENKEL LTD | Trimmable CR;0603;5.1K;�20% RoHS : Compliant | 0 | ||
![]() Vyrian | PWR263S-35-1200F![]() | Bourns Inc | Fixed Resistor, Metal Glaze/thick Film, 35W, 120ohm, 250V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 4035 RoHS : Compliant | 16,894 | ||
| AP7335-12WG-7 | Diodes Incorporated | Fixed Positive LDO Regulator, 1.2V, 0.3V Dropout, PDSO5 | 16,462 | |||
| RMW-35/12-1200/ADH-0 | TE Connectivity | HEAT SHRINK TUBE, DUAL WALL, 35 ID Before Shrink, 3:1 Shrink Ratio, BLACK RoHS : Compliant | 10,524 | |||
| F433512PGC | Texas Instruments | 7,798 | ||||
| KTM0023/512 | Kingston Technology Company | 6,650 | ||||
| OM8P0S3512Q-A0 | Kingston Technology Company | Flash Module, 512GX8 RoHS : Compliant | 4,627 | |||
| EPM3512AQI208-10 | Intel / Altera | EE PLD, 10ns, 512-Cell, CMOS, PQFP208 | 3,972 | |||
| EPM3512AFC256-7 | Intel Corporation | EE PLD, 7.5ns, 512-Cell, CMOS, PBGA256 RoHS : Not Compliant | 3,868 | |||
| EPM3512AFI256-10N | Intel / Altera | EE PLD, 10ns, 512-Cell, CMOS, PBGA256 | 3,695 | |||
| KVR400D2S8R3/512 | Kingston Technology Company | 3,400 | ||||
| DHKVR133X64C3512 | Kingston Technology Company | 3,391 | ||||
| DHKVR133X72RC3512 | Kingston Technology Company | 3,369 | ||||
| KTA-PBG4333/512-G | Kingston Technology Company | 2,794 | ||||
| KVR133X64C3/512 | Kingston Technology Company | 2,640 | ||||
| KTN-PM533/512 | Kingston Technology Company | 2,514 | ||||
![]() Waytek, Inc. | 180351-2 | TE Connectivity | Terminal For Relay Connector 1/4" PUSH-ON, 12-10 GA RoHS : Compliant |
| 11,765 | |
| 180351-2 | TE Connectivity | Terminal for Relay Connector 1/4" push on, 10-12 GA. wire 3,000/Reel RoHS : Compliant |
| 10,333 | ||
| HDBB-335-1-250 | 3M | 3M HDBB-335-1-250 heat shrinkable cable breakout boot is a 3-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 2.40"/1.40" outlet dimensions for larger breakout sealing. |
| 18 | ||
![]() Win Source Electronics | FSMD035-1206-R | Fuzetec Technology Co Ltd | RESETTABLE FUSE - SMD, 1206 SIZE RoHS : Compliant |
| 27,850 | |
| AX3512BTA | Others |
| 21,000 | |||
| REF35125QDBVR | Texas Instruments | 650-NA QUIESCENT CURRENT, 12-PPM RoHS : Compliant |
| 17,120 | ||
| PMA3-5123+ | Mini-Circuits | SMT LNA, 5.5-12.5 GHZ, 50 RoHS : Compliant |
| 2,323 | ||
EPM3512AQC208-10N![]() | Altera Corporation | IC CPLD 512MC 10NS 208QFP / CPLD MAX® 3000A Family 10K Gates 512 Macro Cells 87MHz 3.3V 208-Pin PQFP Tray RoHS : Compliant |
| 2,000 | ||
| FNA23512A | onsemi | MODULE SPM 1.2V 35A 34PWRDIP RoHS : Compliant |
| 984 | ||
| AP3512EMTR-G1 | Diodes Incorporated | IC REG BUCK ADJ 2A SYNC RoHS : Compliant |
| 107 | ||
| SSD-C12M-3512 | Others |
| 15 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |