| 전자부품 데이터시트 검색엔진 |
|
364TCG-R 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
![]() ComSIT USA | 1882364800 | MAQIM SA DE CV | AVAILABLE EU | 12 | ||
| 2364900 | MITSUBISHI CHEMICAL | AVAILABLE EU | 170 | |||
| 4162364 | FUSITE | AVAILABLE EU | 90 | |||
| 7443640330B | Wurth Electronics Midcom | AVAILABLE EU | 2,157 | |||
| S133644BK | HPKJ | AVAILABLE EU | 179 | |||
| SALTC364DP64F300FAA | Infineon Technologies AG | AVAILABLE EU | 508 | |||
![]() GLYN GmbH & Co. KG | DTDUO3CG3/64GBBK | Kingston Technology Company | USB-Stick, 64GB, USB 3.2, 3D TLC, 0øC to 60øC | 10,000 | ||
| SDCS3/64GBCP | Kingston Technology Company | microSD Card, 64GB, 3D FLASH, -25øC to 85øC | 852 | |||
![]() PUI | 12.94364 | 12,340 | ||||
| 12.87364 | 4,000 | |||||
| 9001-13641C00A | 695 | |||||
| 9001-33641C00A | 473 | |||||
| 364BPZ | 72 | |||||
| 2013-64G00S/033/127 | 31 | |||||
| 12.90364 | 10 | |||||
![]() Braemac Americas-Symmetry | HBFBU03-6412-E-A1 | Jetway Computer Corp | Jetway NUC Fanless J6412 with 64GB EMMC |
| 0 | |
| EC3645ETTS-25.000M TR | Abracon Corporation | Standard Clock Oscillator 25.000MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645TTS-66.666M TR | Abracon Corporation | Standard Clock Oscillator 66.666MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645TS-12.288M TR | Abracon Corporation | Standard Clock Oscillator 12.288MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645ETTS-27.000M TR | Abracon Corporation | Standard Clock Oscillator 27.000MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645TTS-24.576M TR | Abracon Corporation | Standard Clock Oscillator 24.576MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645ETTS-48.000M TR | Abracon Corporation | Standard Clock Oscillator 48.000MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645ETTTS-8.000M TR | Abracon Corporation | Standard Clock Oscillator 8.000MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645ETTS-40.000M TR | Abracon Corporation | Standard Clock Oscillator 40.000MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645TTS-25.000M TR | Abracon Corporation | Standard Clock Oscillator 25.000MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645TS-24.000M TR | Abracon Corporation | Standard Clock Oscillator 24.000MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| EC3645TTS-32.000M TR | Abracon Corporation | Standard Clock Oscillator 32.000MHz SMD 3.2mm x 5.0mm 50ppm |
| 0 | ||
| HBFBU03-6412E | Jetway Computer Corp | Intel Elkhart Lake SoC Processor, DDR4 3200MHz up to 32GB |
| 0 | ||
| EC3645ETTS-125.000M TR | Abracon Corporation | Standard Clock Oscillator 125.000MHz SMD 3.2mm x 5.0mm 50ppm -40C to +85C |
| 0 | ||
ABM8W-28.6364MHZ-4-D2X-T3![]() | Abracon Corporation | CRYSTAL 28.6364MHZ 4PF SMD RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | 2322-706-75364L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 8,380 | |
| CRCW06036492FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant | 6,854 | |||
| 2306-186-63364 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 5,000 | ||
| CR16B364JT | IBS Electronics Inc | IN STOCK SHIP TODAY |
| 5,000 | ||
| CR1206J364T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | ||
| B57364S100M | TDK Electronics | IN STOCK SHIP TODAY | 145 | |||
| 03-14364A07 | IN STOCK SHIP TODAY | 51 | ||||
| 5980-01-364-0120 | DDP Engineered LED Solutions | IN STOCK SHIP TODAY |
| 29 | ||
| MS35307-364 | IN STOCK SHIP TODAY | 25 | ||||
| 7-1437536-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 16 | ||
| 1536463 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 15 | ||
| 7-1437536-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
| 07-P23647G002 | IN STOCK SHIP TODAY | 3 | ||||
| 9364-060-U500 | Belden Inc | IN STOCK SHIP TODAY |
| 1 | ||
| 80-6103-3649-9 | 3M | IN STOCK SHIP TODAY |
| 1 | ||
![]() Flip Electronics | 2SC3649S-TD-E | onsemi | Stock, Ship Today RoHS : Compliant | 121,710 | ||
| CYRF7936-40LTXC | Infineon Technologies AG | Stock, Ship Today |
| 31,562 | ||
| CAT3649HV3 | onsemi | Stock | 7,585 | |||
CAT3649HV3-GT2![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,585 | ||
| CYPD4236-40LQXI | Infineon Technologies AG | Stock, Ship Today |
| 5,898 | ||
| 2SC3646S-P-TD-E | onsemi | Stock, Ship Today | 3,000 | |||
R5F3640MDFA#U0![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,722 | |||
R5F3640DNFA#U0![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,620 | |||
R5F3640DDFA#U0![]() | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 1,493 | ||
| R5F36406CDFA#V0 | Renesas Electronics Corporation | Stock | 1,299 | |||
CAT3648HV3-GT2![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,250 | ||
M4A3-64/32-12VI![]() | Lattice Semiconductor Corporation | Stock RoHS : Not Compliant | 1,240 | |||
| R5F3640MDFB#30 | Renesas Electronics Corporation | Stock | 1,187 | |||
R5F364AMDFA#U0![]() | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 967 | ||
R5F3640DNFB#U0![]() | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 4 | ||
![]() Pasternack Enterprises US | PE3646/PH180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using PE-SR405FL Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle cable using PE-SR405FL coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male right angle cable using PE-SR405FL coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assembly has male gender on end 1 and male on end 2. PE3646/PH180 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.780 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMA plug cable assembly PE3646/PH180 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3646/PH180 RF cable are available on our downloadable PDF datasheet. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 2,961 | ||
| PE3W02364 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to N Female Bulkhead Cable Using PE-SR405FL Coax., Radio frequency assembly SMA male to N female bulkhead cable using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female bulkhead cable using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N bulkhead cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W02364 can also be known as a SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The formable RF cable has a between series connection. SMA plug to type N jack cable assembly PE3W02364 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W02364 can also be used in the other direction and will be a type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. | 2,556 | |||
| PE36455LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female to BNC Female Cable 12 Inch Length Using RG178 Coax, LF Solder., Radio frequency assembly BNC female to BNC female cable 12 inch length using RG178 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable 12 inch length using RG178 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE36455LF-12 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.393-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE36455LF-12 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has an in-series connection. BNC jack to BNC jack cable assembly PE36455LF-12 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 271 | ||
| PE3W21364 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using RG400 Coax. PE3W21364 is a N male to N male right angle cable using RG400 coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21364 N male to N male right angle cable assembly is constructed with RG400 coax. | 0 | |||
| PE3W23641 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Male to SC Male Cable Using RG223 Coax. PE3W23641 is a N male to SC male cable using RG223 coax. This Pasternack N male to SC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SC for connector 2. Our male N to male SC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23641 N male to SC male cable assembly is constructed with RG223 coax. | 0 | |||
| PE36423LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm. 75 Ohm N Male Right Angle to 75 Ohm N Male Cable Using 75 Ohm RG11 Coax, LF Solder., Radio frequency assembly 75 Ohm N male right angle to 75 Ohm N male cable using 75 Ohm RG11 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male right angle to 75 Ohm N male cable using 75 Ohm RG11 coax, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle N type cable connection on one end and type N cable connection on the other. Our right angle N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE36423LF can also be known as a right angle type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE36423LF is built with RG11 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to N type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this N type right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36423LF can also be used in the other direction and will be N type male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male right angle to 75 Ohm N male cable using 75 Ohm RG11 coax, LF solder. | 0 | |||
| PE3647/HS | Pasternack Enterprises | 0 | ||||
| PE3W03642/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10-32, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMB Plug to 10-32 Male Cable Using LMR-100 Coax with HeatShrink. PE3W03642/HS is a SMB plug to 10-32 male cable using LMR-100A coax. This Pasternack SMB plug to 10-32 male cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm 10-32 for connector 2. Our plug SMB to male 10-32 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03642/HS SMB plug to 10-32 male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W23640 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. N Male to SC Male Cable Using 53 Ohm RG55 Coax. PE3W23640 is a N male to SC male cable using RG55 coax. This Pasternack N male to SC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SC for connector 2. Our male N to male SC cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W23640 N male to SC male cable assembly is constructed with RG55 coax. | 0 | |||
| PE33641LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50. SMC Plug to SMC Plug Cable Using RG58 Coax, RoHS. PE33641LF is a SMC plug to SMC plug cable using RG58 coax. This Pasternack SMC plug to SMC plug cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm SMC for connector 2. Our plug SMC to plug SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33641LF SMC plug to SMC plug cable assembly is constructed with RG58 coax. | 0 | |||
| PE36440LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MCX Plug Right Angle Cable Using RG316 Coax, RoHS. PE36440LF is a MMCX plug right angle to MCX plug right angle cable using RG316 coax. This Pasternack MMCX plug right angle to MCX plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MCX for connector 2. MMCX right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36440LF MMCX plug right angle to MCX plug right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C8364 | Pasternack Enterprises | 0 | ||||
| PE3M0364-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Size: 8, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 Contact Pin to BMA Size 8 Contact Pin Cable 36 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0364-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a BMA pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to BMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0364-36 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to BMA pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0364-36 in-series RF cable has 0.8 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to BMA pin cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0364-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to BMA RF cable are available on our downloadable PDF datasheet. BMA pin to BMA pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to BMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3643/SP1 | Pasternack Enterprises | 0 | ||||
| PE3W03646/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to SSMB Jack Bulkhead Cable Using RG178 Coax with HeatShrink. PE3W03646/HS is a SMA male to SSMB jack bulkhead cable using RG178 coax. This Pasternack SMA male to SSMB jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMB for connector 2. Our male SMA to jack SSMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03646/HS SMA male to SSMB jack bulkhead cable assembly is constructed with RG178 coax. | 0 | |||
![]() Venkel Ltd. | CR0402-16W-364JT | VENKEL LTD | Chip Resistor;0402;1/16W;360K;�5% RoHS : Compliant | 20,000 | ||
| CR1206-4W-364JT | VENKEL LTD | Chip Resistor;1206;1/4W;360K;�5% RoHS : Compliant | 10,000 | |||
| SWCR0603-RK-364MT | VENKEL LTD | Surge Withstanding CR;0603;1/8W;�100PPM;360K;�20% RoHS : Compliant | 0 | |||
| SWCR0805-TK-364MT | VENKEL LTD | Surge Withstanding CR;0805;1/4W;�100PPM;360K;�20% RoHS : Compliant | 0 | |||
| CR2512-1W-364JT | VENKEL LTD | Chip Resistor;2512;1W;360K;�5% RoHS : Compliant | 0 | |||
| CR0805-8W-364JT | VENKEL LTD | Chip Resistor;0805;1/8W;360K;�5% RoHS : Compliant | 0 | |||
| AGCR1206-TL-5364FT | VENKEL LTD | Auto Grade Resistor;1206;1/4W;�200PPM;5.36M;�1% RoHS : Compliant | 0 | |||
| AGCR1206-VK-364JT | VENKEL LTD | Auto Grade Resistor;1206;1/2W;�100PPM;360K;�5% RoHS : Compliant | 0 | |||
| PWCR0805-RK-5364FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;5.36M;�1% RoHS : Compliant | 0 | |||
| AGCR2010-XK-364JT | VENKEL LTD | Auto Grade Resistor;2010;1W;�100PPM;360K;�5% RoHS : Compliant | 0 | |||
| CRS0603-10W-364JT | VENKEL LTD | Anti-Sulfuration CR;0603;1/10W;360K;�5% RoHS : Compliant | 0 | |||
| HVCR1206-4W-364JT | VENKEL LTD | High Voltage CR;1206;1/4W;360K;�5% RoHS : Compliant | 0 | |||
| HVCR2512-1W-364JT | VENKEL LTD | High Voltage CR;2512;1W;360K;�5% RoHS : Compliant | 0 | |||
| HPCR0402-R-364JT | VENKEL LTD | High Power CR;0402;1/8W;360K;�5% RoHS : Compliant | 0 | |||
| CR0805-10W-5364FT | VENKEL LTD | Chip Resistor;0805;1/10W;5.36M;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | Y16364K00000F9R | Vishay Precision Group Inc | Fixed Resistor, Metal Foil, 0.1W, 4000ohm, 20V, 1% +/-Tol, 0.2ppm/Cel, Surface Mount, 0603 RoHS : Compliant | 14,671 | ||
| UPD46364182BF1-E33-EQ1-A | Renesas Electronics Corporation | DDR SRAM, 2MX18, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 13,310 | |||
| UPD46185364BF1-E40-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 512KX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 11,719 | |||
| UPD46364362BF1-E33-EQ1-A | Renesas Electronics Corporation | DDR SRAM, 1MX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 11,321 | |||
| UPD44645364AF5-E40-FQ1-A | Renesas Electronics Corporation | Standard SRAM, 2MX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 10,864 | |||
| UPD46185364BF1-E40Y-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 512KX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 10,509 | |||
V62/03643-01XE![]() | Texas Instruments | Comparator, 2 Func, 5000uV Offset-Max, 2700ns Response Time, CMOS, PDSO8 RoHS : Compliant | 9,823 | |||
| UPD44645364AF5-E50-FQ1-A | Renesas Electronics Corporation | Standard SRAM, 2MX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 9,236 | |||
UPD44165364BF5-E40-EQ3![]() | Renesas Electronics Corporation | QDR SRAM, 512KX36, 0.45ns, CMOS, PBGA165 RoHS : Not Compliant | 8,212 | |||
| UPD46364365BF1-E40-EQ1-A | Renesas Electronics Corporation | DDR SRAM, 1MX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 7,870 | |||
| V62/03640-01XE | Texas Instruments | Digital Signal Processor, 32-Bit Size, 32-Ext Bit, 62.5MHz, CMOS, PBGA352 | 7,391 | |||
| V62/03640-01XA | Texas Instruments | Digital Signal Processor, 32-Bit Size, 32-Ext Bit, 62.5MHz, CMOS, PBGA352 RoHS : Not Compliant | 7,372 | |||
| UPD46365364BF1-E40-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 1MX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 7,016 | |||
| UPD46364362BF1-E40Y-EQ1-A | Renesas Electronics Corporation | DDR SRAM, 1MX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 6,520 | |||
V62/03641-01XE![]() | Texas Instruments | Logic Circuit, CMOS, PDSO6 RoHS : Compliant | 3,956 | |||
![]() Waytek, Inc. | 7100163643 | 3M | 16-14 GA Blue Nylon Butt Connector With Extra Sleeve 31781 |
| 20,813 | |
| 12034364 | Aptiv PLC | Metri-Pack 630 Gray Seal DELPHI # 12034364 |
| 7,226 | ||
| 7157-3648 | Yazaki Corp | Yazaki 7157-3648 is a black cable seal for 2.3II Series connectors and 22-20 Ga. wire. It fits compatible Yazaki sealed housings to protect the conductor entry point from moisture and contaminants in automotive electrical assemblies. |
| 223 | ||
![]() Win Source Electronics | LNK364PN![]() | Power Integrations | IC OFFLINE SWIT HV 8DIP RoHS : Compliant |
| 88,888 | |
| 0436450300 | Molex | CONN RCPT HSG 3POS 3.00MM RoHS : Compliant |
| 41,810 | ||
| ASM2364 | Asmedia Technology Inc | USB 3.2 Gen 2x2 to PCIe Gen 3 x4 NVMe Bridge Controller |
| 18,518 | ||
OPA2364AIDGKTG4![]() | Texas Instruments | IC OPAMP GP 7MHZ RRO 8VSSOP RoHS : Compliant |
| 14,030 | ||
OPA364IDBVT![]() | Texas Instruments | IC OPAMP GP 1 CIRCUIT SOT23-5 / General Purpose Amplifier 1 Circuit Rail-to-Rail SOT-23-5 RoHS : Compliant |
| 8,440 | ||
OPA364IDBVRG4![]() | Texas Instruments | IC OPAMP GP 7MHZ RRO SOT23-5 RoHS : Compliant |
| 8,370 | ||
| LT8364HDE#PBF | Analog Devices Inc | IC REG BST SEPIC 4A 12DFN / Boost, SEPIC Switching Regulator IC Positive Fixed 1 Output 4A (Switch) 12-WFDFN Exposed Pad RoHS : Compliant |
| 5,000 | ||
CS5364-CQZ![]() | Cirrus Logic | IC ADC/AUDIO 24BIT 192K 48LQFP / ADC, Audio 24 b 192k I2C, SPI 48-LQFP (7x7) RoHS : Compliant |
| 4,200 | ||
LTC4364IDE-1#PBF![]() | Linear Technology | Hot Swap Controller 1-CH 80V N-Channel Positive High Voltage Automotive 14-Pin DFN EP Tube / IC SURGE STOPPER W/DIODE 14DFN RoHS : Compliant |
| 3,740 | ||
| LTC4364IDE-1#TRPBF | Analog Devices Inc | SURGE STOPPER W/DIODE 14DFN RoHS : Compliant |
| 3,670 | ||
| 2SC3646S-TD-E | onsemi | TRANS NPN 100V 1A SOT89-3 RoHS : Compliant |
| 3,000 | ||
OPA4364AIPWTG4![]() | Texas Instruments | IC OPAMP GP 7MHZ RRO 14TSSOP RoHS : Compliant |
| 2,370 | ||
| RTL8364NBI-CG | Realtek Semiconductor |
| 2,000 | |||
| LTC3646HDE | Analog Devices Inc | IC REG BUCK ADJ 1A 14DFN |
| 1,479 | ||
DS90CF364AMTD![]() | Texas Instruments | IC INTERFACE SPECIALIZED 48TSSOP / Interface 48-TSSOP RoHS : Not Compliant |
| 1,055 | ||
![]() Wuhan P&S | 2SC3647S-TD-E | onsemi | 100V,2A,Low VCE(sat),NPN Transistor RoHS : Compliant |
| 2,000 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |