| 전자부품 데이터시트 검색엔진 |
|
6312JSFPC 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
![]() ComSIT USA | FDC6312P![]() | Fairchild Semiconductor Corporation | DUAL P-CHANNEL 1.8V POWERTRENCH SPECIFIED MOSFET Small Signal Field-Effect Transistor, 2.3A I(D), 20V, 2-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 69,000 | ||
| MAX6312UK46D3T | Maxim Integrated Products | 5-PIN, MULTIPLE-INPUT, PROGRAMMABLE RESET IC Power Supply Support Circuit, Fixed, 1 Channel, +4.6VV, CMOS, PDSO5 RoHS : Not Compliant | 2,470 | |||
| Y31B63127FPLFG | C&K Switches | Pushbutton Switch, SMD, rated for signal-level applications, for user interface and control functions RoHS : Compliant | 2,000 | |||
| XTL661500HIK28636312TR | SIWARD Crystal Technology Co Ltd | Electronic Component RoHS : Compliant | 1,000 | |||
| 0263125HAT1L | Littelfuse Inc | AXIAL LEAD AND CARTRIDGE FUSE Electric Fuse, Very Fast Blow, 0.125A, 250VAC, 50A (IR), Through Hole, PICO RoHS : Compliant | 200 | |||
| 736312 | WAGO Innovative Connections | PCB TERMINAL STRIP Strip Terminal Block, 10A, 2.5mm2, 2 Row(s), 2 Deck(s) RoHS : Not Compliant | 100 | |||
| 9663127602 | HARTING Technology Group | STAMPED SOLDER PIN, ANGLED WITHOUT GROUNDING BOARD LOCK FEMALE CONNECTOR D Subminiature Connector, 25 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, #4-40, Plug RoHS : Compliant | 41 | |||
![]() NexGen Digital | 1-329631-2 | TE Connectivity | RoHS : Compliant | 90 | ||
| 203263-1234 | Molex | 20 | ||||
![]() Avnet Silica | AP7363-12D-13 | Diodes Incorporated | DIIAP736312D13 (Alt: AP7363-12D-13) RoHS : Compliant | 2,500 | ||
| FDC6312P | onsemi | Dual MOSFET P Channel 20 V 23 A (Alt: FDC6312P) RoHS : Compliant | 0 | |||
| JANS1N6312US | Microchip Technology Inc | (Alt: JANS1N6312US) RoHS : Not Compliant | 0 | |||
| MCP16312-E/MS | Microchip Technology Inc | (Alt: MCP16312-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MS | Microchip Technology Inc | (Alt: MCP16312T-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MNY | Microchip Technology Inc | (Alt: MCP16312T-E/MNY) RoHS : Compliant | 0 | |||
| DSC1123DE5-320.6312 | Microchip Technology Inc | MEMS OSC LVDS 3206312MHz 10PPM 2533V 20 to 70C 25 x 20mm (Alt: DSC1123DE5-320.6312) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 63125101511 | Varta | IN STOCK SHIP TODAY |
| 23,678 | |
| 90863-125 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant | 1,500 | |||
| 1-87631-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 500 | ||
| 263-12 | Xicon Passive Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 150 | ||
| 766163120J | CTS Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 89 | ||
| 631-28-CS-E | MPE-Garry GmbH | IN STOCK SHIP TODAY | 48 | |||
| RJMG163127101NR | Amphenol Corporation | IN STOCK SHIP TODAY |
| 38 | ||
| 767163121GP | CTS Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 29 | ||
| 2-87631-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 22 | ||
| M39012/56-3126 | Amphenol SV Microwave | IN STOCK SHIP TODAY RoHS : Compliant |
| 11 | ||
FDC6312P![]() | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 8 | ||
| 263-12-036 | Midwest Microwave | IN STOCK SHIP TODAY | 7 | |||
| 90663-1202 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 5 | ||
| BUS-63125-200 | DDC | IN STOCK SHIP TODAY | 2 | |||
| 767163121G | CTS Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
![]() DB Roberts | 8596-3124-A-0 | RAF Electronic Hardware |
| 4 | ||
| 063123237E | Essentra Components | 0 | ||||
| 58-26-312-26 | Southco | 0 | ||||
| 47-63-121-25 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-63-121-65 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| OFNS-16-312-19 | Essentra Components | FIBER WIRE SDL,ARROW MNT,NATUR | 0 | |||
| 063123200 | Essentra Components | LATCH, CAM- KEY DIFFERENT | 0 | |||
| AEKB-616-312 | PennEngineering (PEM) | 3/8-16 | 0 | |||
| 063120434E | Essentra Components | 0 | ||||
| 063123233E | Essentra Components | 0 | ||||
| CAH2-3716-312T | SHEREX FASTENING SO | 0 | ||||
| AEKA-616-312 | PennEngineering (PEM) | 0 | ||||
| AESS-616-312-1088 | PennEngineering (PEM) | Provides strong external threads in blind applications.Easy to install using spin/spin tooling.The standard is assembled with an AEL insert but can also be assembled with an AEK or an AEH insert.Other materials available. | 0 | |||
| D3-316-312-170 | Southco | D3-316-312-170 | 0 | |||
| 47-63-121-24 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() EBV Elektronik | 1N6312US | Microchip Technology Inc | (Alt: 1N6312US) RoHS : Compliant | 0 | ||
| FDC6312P | onsemi | Dual MOSFET P Channel 20 V 23 A (Alt: FDC6312P) RoHS : Compliant | 0 | |||
| JANS1N6312 | Microchip Technology Inc | (Alt: JANS1N6312) RoHS : Compliant | 0 | |||
| MCP16312-E/MS | Microchip Technology Inc | (Alt: MCP16312-E/MS) RoHS : Compliant | 0 | |||
| HCPL-5631#200 | Broadcom Limited | Optocoupler LogicOut Open Collector DCIN 2CH 8Pin CDIP (Alt: HCPL-5631#200) RoHS : Not Compliant | 0 | |||
| JANTX1N6312US | Microchip Technology Inc | (Alt: JANTX1N6312US) RoHS : Not Compliant | 0 | |||
| MCP16312T-E/MS | Microchip Technology Inc | (Alt: MCP16312T-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MNY | Microchip Technology Inc | (Alt: MCP16312T-E/MNY) RoHS : Compliant | 0 | |||
| JANTX1N6312US/TR | Microchip Technology Inc | (Alt: JANTX1N6312US/TR) RoHS : Not Compliant | 0 | |||
| MIC5363-1.2YMT-TR | Microchip Technology Inc | (Alt: MIC5363-1.2YMT-TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | CPH6312-TL-E | onsemi | Stock, Ship Today |
| 252,000 | |
![]() Master Electronics | T1770063129-000 | TE Connectivity | H6B-TBFH-PG29 RoHS : Compliant |
| 0 | |
| 1-173631-2 | TE Connectivity | 070 MLC REC CONT 20-16 GOLD MOQ Reduction RoHS : Compliant |
| 0 | ||
| CMB-163-12HNN-R-A | Carling Technologies | RoHS : Compliant |
| 0 | ||
| 155631-2044 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 155631-2206 | ITT Interconnect Solutions | Connector Miniature Circular PIN 4 Position Solder Cup Straight Jam Nut 4 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 1563124-1 | TE Connectivity | 2. LOCK 10 POS FEM HOUSING MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1676312-1 | TE Connectivity | RN 0805 357R 0.1% 10PPM CUT LENGTH RoHS : Compliant |
| 0 | ||
| 0310563121 | ITT Interconnect Solutions | 0310563121; MIL-DTL 5015 Series I; Circular RoHS : Compliant |
| 0 | ||
| 336312-12-0050 | Amphenol RF | SMA Bulkhead Jack IP67 RP to AMC Plug on 1.13mm cable 50 mm RoHS : Compliant |
| 0 | ||
| 3-2176312-1 | TE Connectivity | RP 1E 0.1W 25K5 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| DSC6312JE1CB-080.0000 | Microchip Technology Inc | MEMS OSC LVCMOS 80MHz 50PPM 1.8-3.3V -20 to 70C 2.5 x RoHS : Compliant |
| 0 | ||
| FW-05-03-L-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | ||
| FW-10-03-F-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | ||
| FW-10-05-G-D-363-125-A | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-25-04-LM-D-163-120 | Samtec Inc | .050'' BOARD SPACERS RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 656-3122-203F | Dialight | LED Panel Mount Indicators 1/2 Dome Red/Green 5VDC w/Leads RoHS : Compliant |
| 50 | |
| 770-KD6312-000G | DFI-ITOX | KD631-Q170CRM:R.1 F/G MOTHER BOARD RoHS, 770-KD6312-000G |
| 50 | ||
| 09663126600 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-254 25P RoHS : Compliant |
| 50 | ||
CFM-8038BF-2130-631-22![]() | Same Sky | DC Fans dc axial fan 80 mm square 38 mm 24 Vdc ball 13000 RPM 98.43 CFM TSPWM RoHS : Compliant |
| 50 | ||
| 1963120000 | Weidmüller Interface GmbH & Co. KG | Modular Connectors / Ethernet Connectors IE-PS-V01M-RJ45-FH RoHS : Compliant |
| 22 | ||
| P5-631224 | OTTO Engineering Inc | Pushbutton Switches Alternate Action Pushbutton Switch RoHS : Compliant |
| 15 | ||
| P5-631225 | OTTO Engineering Inc | Pushbutton Switches Alternate Action Pushbutton Switch RoHS : Compliant |
| 6 | ||
| 09663127603 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-284 25P RoHS : Compliant |
| 3 | ||
| P8-V126312 | OTTO Engineering Inc | Pushbutton Switches Vandal Resistant Pushbutton Switch RoHS : Compliant |
| 2 | ||
| 906-31-2-15-2-B-0 | Wakefield-Vette | Heat Sinks Chipset Heat Sink with Clip, Pin Fin, 31mm Chip Size, 14.6mm Height, Aluminum RoHS : Compliant |
| 0 | ||
| 1663129 | Phoenix Contact | Connector, R/A M12 M 5pos, gland Pg7, cable 4-6mm, SACC-M12MR-5CON-PG 7-M RoHS : Compliant |
| 0 | ||
| 45-2631.29H0.000 | EAO AG | Switch Actuators Mushroom-head pushbutton actuator illuminated green transparent D40 momentary front/housing metal RoHS : Compliant |
| 0 | ||
| 09663126601 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-254 25 RoHS : Compliant |
| 0 | ||
| 906-31-2-12-2-B-0 | Wakefield-Vette | Heat Sinks Chipset Heat Sink with Clip, Pin Fin, 31mm Chip Size, 11.6mm Height, Aluminum RoHS : Compliant |
| 0 | ||
| CFM-8038BF-2130-631-22 | CUI Inc | DC axial fan, sq80x38 mm, 24Vdc 1.15A, ball 13000 RPM 98.42 CFM TSPWM, 4wire |
| 0 | ||
![]() Pasternack Enterprises US | PE3C9563-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to Straight Cut Lead Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SMP female right angle to straight cut lead cable 12 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to straight cut lead cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a straight cut lead cable connection on the other. Our right angle SMP to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9563-12 can also be known as a right angle SMP jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9563-12 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. SMP jack to straight cut lead sexless cable assembly PE3C9563-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9563-12 can also be used in the other direction and will be a straight cut lead sexless to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to straight cut lead cable assembly for quick shipment worldwide. Variations of SMP and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to Straight Cut Lead RF cable assembly as per your requirements. |
| 557 | |
| PE35363-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to Reverse Thread SMA Male Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to reverse thread SMA male cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse thread SMA male cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse thread SMA cable connection on the other. Our SMA to reverse thread SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse thread SMA cable is a male to male coax assembly, PE35363-12, can also be known as a SMA plug to reverse thread SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse thread SMA plug cable assembly PE35363-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse thread SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35363-12 can also be used in the other direction and will be reverse thread SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse thread plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse thread SMA male cable 12 inch length using RG178 coax. |
| 81 | ||
| PE3C100063-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Low Loss Test Cable 12 Inch Length Using PE-TC154 Coax., Pasternack’s PE3C100063-12 low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100063-12 can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100063-12 RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C100063-12 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 15 | ||
| PE3C10763-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 2.4mm Male Cable 12 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10763-12 1.85mm male to 2.4mm male RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.4mm cable connection on the other. Our 1.85mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10763-12 can also be known as a 1.85mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10763-12 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C10763-12 1.85mm plug to 2.4mm plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10763-12 can also be used in the other direction and will be a 2.4mm male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.4mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3M0363-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Size: 16, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P047, RF Cable Type: Coax, RF Cable Specification: PE-P047 datasheet, RF Cable Impedance : 50 Ohm. SMPS Size 16 D38999 Contact Socket to SMA Female Cable 12 Inch Length Using PE-P047 Coax with HeatShrink, LF Solder. The PE3M0363-12 from Pasternack is a D38999 contact cable assembly that is built with a size 16 SMPS socket contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This SMPS to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0363-12 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our SMPS socket to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and FEP dielectric type. The PE3M0363-12 between-series RF cable has 0.4 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. SMPS socket to SMA female cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack PE3M0363-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this SMPS to SMA RF cable are available on our downloadable PDF datasheet. SMPS socket to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of SMPS and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7963-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Low PIM Cable 12 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to 7/16 DIN male right angle low PIM cable 12 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male right angle to 7/16 DIN male right angle low PIM cable 12 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C7963-12, can also be known as a low PIM right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7963-12 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to 7/16 DIN male right angle low PIM cable 12 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3W15363-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Female to SMA Male Cable 12 Inch Length Using PE-SR405AL Coax., Radio frequency assembly mini SMP female to SMA male cable 12 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable 12 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W15363-12 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has a between series connection. Our Mini SMP female to SMA male cable has a maximum VSWR of 1.5:1. Mini SMP jack to SMA plug cable assembly PE3W15363-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid Mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15363-12 can also be used in the other direction and will be a SMA male to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8063-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. |
| 0 | ||
| PE71S6312 | Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: SP6T, Minimum Frequency: DC, Maximum Frequency: 22 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 20 Watts, Maximum VSWR: 1.6:1, Maximum Insertion Loss: 0.6 dB, Minimum Isolation: 60 dB. SP6T Electromechanical Relay Normally Open Switch, Terminated, DC to 22 GHz, 20W, 28V, Indicators, TTL, Diodes, SMA. PE71S6312 electromechanical RF relay switch from Pasternack is a SP6T design. Our SP6T electromechanical RF switch uses SMA connectors at 50 Ohm. This SMA RF relay SP6T switch has a maximum frequency of 22 GHz and maximum power of 20 Watts. The Pasternack radio frequency SP6T SMA electro-mechanical relay switch is rated at a control voltage of 28 Volts, indicator voltage and switching speed of 15ms. SMA SP6T electro mechanical RF relay switch features Indicators, TTL Logic, Diodes with an isolation minimum of 60 dB. SP6T electromechanical relay radio frequency switch PE71S6312 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SP6T SMA coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 0 | ||
| PE33363-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMC Plug to SMC Plug Right Angle Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SMC plug to SMC plug right angle cable 12 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug right angle cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and right angle SMC cable connection on the other. Our SMC to right angle SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE33363-12, can also be known as a SMC male to right angle SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE33363-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to right angle SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMC plug to SMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33363-12 can also be used in the other direction and will be right angle SMC plug to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug right angle cable 12 inch length using RG316 coax. |
| 0 | ||
| PE3W06312 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. SMA Male to N Male Right Angle Cable Using LMR-400-DB Coax. PE3W06312 is a SMA male to N male right angle cable using LMR-400-DB coax. This Pasternack SMA male to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06312 SMA male to N male right angle cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C3763-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Right Angle Cable 12 Inch Length Using PE-P047 Coax., Radio frequency assembly SMA male to SMA male right angle cable 12 inch length using PE-P047 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 12 inch length using PE-P047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C3763-12 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C3763-12 is built with PE-P047 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3763-12 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 12 inch length using PE-P047 coax. |
| 0 | ||
| PE3W14163-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male Right Angle to MMCX Jack Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly TNC male right angle to MMCX jack cable 12 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to MMCX jack cable 12 inch length using RG316-DS coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and MMCX cable connection on the other. Our right angle TNC to MMCX cable assemblies have a male gender on end 1 and jack on end 2. PE3W14163-12 can also be known as a right angle TNC plug to MMCX female cable assembly and will be shipped same-day as it is purchased. TNC plug to MMCX female cable assembly PE3W14163-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC right angle male to MMCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W14163-12 can also be used in the other direction and will be MMCX jack to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to MMCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to MMCX cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to MMCX jack cable 12 inch length using RG316-DS coax. |
| 0 | ||
| PE3W16312 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to 7/16 DIN Female Bulkhead Cable Using LMR-600-FR Coax. PE3W16312 is a 7/16 DIN male right angle to 7/16 DIN female bulkhead cable using LMR-600-FR coax. This Pasternack 7/16 DIN male right angle to 7/16 DIN female bulkhead cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to female 7/16 DIN bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16312 7/16 DIN male right angle to 7/16 DIN female bulkhead cable assembly is constructed with LMR-600-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3M0263-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Male Cable 12 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0263-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0263-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0263-12 between-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ pin to SMA male cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0263-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 0 | ||
![]() Teledyne HiRel | 5962-8606312UA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
5962-8606312XA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606312QXA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606312YA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606312QYA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | C1210X7R631-223KNE | VENKEL LTD | HV Chip Capacitor;1210;X7R;630V;0.022uF;�10% RoHS : Compliant | 0 | ||
| C0805C0G631-220KNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;22pF;�10% RoHS : Compliant | 0 | |||
| C0805C0G631-270FNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;27pF;�1% RoHS : Compliant | 0 | |||
| C0805X7R631-272KNP | VENKEL LTD | HV Chip Capacitor;0805;X7R;630V;2700pF;�10% RoHS : Compliant | 0 | |||
| C1808C0G631-220JNE | VENKEL LTD | HV Chip Capacitor;1808;C0G;630V;22pF;�5% RoHS : Compliant | 0 | |||
| C1812C0G631-272JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;630V;2700pF;�5% RoHS : Compliant | 0 | |||
| C0805C0G631-221FNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;220pF;�1% RoHS : Compliant | 0 | |||
| C1206C0G631-220JNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;630V;22pF;�5% RoHS : Compliant | 0 | |||
| C1210C0G631-271JNE | VENKEL LTD | HV Chip Capacitor;1210;C0G;630V;270pF;�5% RoHS : Compliant | 0 | |||
| C1825C0G631-273JNE | VENKEL LTD | HV Chip Capacitor;1825;C0G;630V;0.027uF;�5% RoHS : Compliant | 0 | |||
| C0805C0G631-221KNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;220pF;�10% RoHS : Compliant | 0 | |||
| C0805C0G631-271FNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;270pF;�1% RoHS : Compliant | 0 | |||
| C1206C0G631-270JNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;630V;27pF;�5% RoHS : Compliant | 0 | |||
| C0805C0G631-271JNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;270pF;�5% RoHS : Compliant | 0 | |||
| C1812X7R631-272KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;630V;2700pF;�10% RoHS : Compliant | 0 | |||
![]() Vyrian | STM86312![]() | STMicroelectronics | Vacuum Fluorescent Driver, 22-Segment, PQFP44 RoHS : Compliant | 10,511 | ||
SN74ALVC3631-20PQR![]() | Texas Instruments | FIFO, 512X36, 11.5ns, Synchronous, CMOS, PQFP132 | 9,240 | |||
SN74ACT3631-20PCB![]() | Texas Instruments | FIFO, 512X36, 13ns, Synchronous, CMOS, PQFP120 RoHS : Compliant | 9,221 | |||
SN74ACT3631-20PCBR![]() | Texas Instruments | FIFO, 512X36, 13ns, Synchronous, CMOS, PQFP120 | 7,690 | |||
SN74ACT3631-20PQR![]() | Texas Instruments | FIFO, 512X36, 13ns, Synchronous, CMOS, PQFP132 | 7,661 | |||
| T1610163121-000 | TE Connectivity | Connector Accessory, Aluminum Alloy RoHS : Compliant | 7,049 | |||
SN74ALVC3631-20PCB![]() | Texas Instruments | Bi-Directional FIFO, 512X36, 11.5ns, Synchronous, CMOS, PQFP120 RoHS : Not Compliant | 6,891 | |||
| MCP16312-E/MSVAO | Microchip Technology Inc | Switching Regulator, Current-mode, 575kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 6,388 | |||
SN74ACT3631-20PQ![]() | Texas Instruments | FIFO, 512X36, 13ns, Synchronous, CMOS, PQFP132 RoHS : Compliant | 4,982 | |||
| T1770063120-000 | TE Connectivity | Connector Accessory, Aluminum Alloy RoHS : Compliant | 4,395 | |||
| SN74BCT2163-12FM | Texas Instruments | Cache Tag SRAM, 16KX5, 12ns, PQCC32 RoHS : Not Compliant | 4,137 | |||
SN74ALVC3631-20PCBR![]() | Texas Instruments | FIFO, 512X36, 11.5ns, Synchronous, CMOS, PQFP120 | 3,848 | |||
SN74ALVC3631-20PQ![]() | Texas Instruments | Bi-Directional FIFO, 512X36, 11.5ns, Synchronous, CMOS, PQFP132 RoHS : Not Compliant | 3,566 | |||
| V16312BK199 | Alpha Wire | Wire And Cable RoHS : Compliant | 618 | |||
| ZPED-1616-312PN | Amphenol Corporation | Circular Connector, 19 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Plug RoHS : Compliant | 425 | |||
![]() Waytek, Inc. | 956-3124 | Littelfuse Inc | The Cole Hersee 956-3124 is a heavy-duty 3-position ignition switch designed for reliable engine control in automotive and equipment applications. Featuring OFFIGN/ACCSTART positions with anti-restart protection, it prevents accidental re-engagement of the starter. Rated for 12V (10A ACC/IGN, 5A start), it includes five screw terminals, a lever actuator, and sealed construction with O-ring and gasket for durability in harsh environments. |
| 26 | |
![]() Win Source Electronics | MCP16312T-E/MS | Microchip Technology Inc | IC REG BUCK ADJUSTABLE 1A 8MSOP / Buck Switching Regulator IC Positive Adjustable 2V 1 Output 1A 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) RoHS : Compliant |
| 14,783 | |
| SKY66312-11 | Skyworks Solutions Inc | IC AMP 4G/5G 2.3-2.4GHZ 16MCM RoHS : Compliant |
| 4,438 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |