| 전자부품 데이터시트 검색엔진 |
|
6312ML3JB-T 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
![]() DigiKey | 631225 4 | Hoffmann Group | 1/4 INCH DRIVE SOCKET, 6 PT, 4MM |
| 2,755 | |
| 963120174 | Wurth Elektronik | ROUND SPACER BRASS 12MM |
| 791 | ||
CFM-8038BF-2130-631-22![]() | Same Sky | FAN AXIAL 80X38MM 24VDC WIRE RoHS : Compliant |
| 223 | ||
| 1631-256-AL | RAF Electronic Hardware | ROUND STANDOFF #2-56 ALUM 1/8" |
| 200 | ||
| 6312 | Adafruit Industries | ESP32-S2 REVERSE TFT FEATHER |
| 106 | ||
| 8015-06P-0631-20 | Sullins Connector Solutions | CONN D-SUB HD PLUG 15P VERT SLDR |
| 100 | ||
| 8015-07S-0631-20 | Sullins Connector Solutions | CONN D-SUB HD RCPT 15P SLDR CUP |
| 100 | ||
| 8025-03P-0631-20 | Sullins Connector Solutions | CONN D-SUB PLUG 25POS VERT SLDR |
| 100 | ||
| M39012/56-3128 | Amphenol SV Microwave | CONN SMA PLUG R/A 50OHM CRIMP RoHS : Compliant |
| 57 | ||
| 638363122007 | Wurth Elektronik | WR-FAST_THT MALE RIGHT ANGLED HE RoHS : Compliant |
| 49 | ||
| 91-631228-54H | PEI-GENESIS | CONN PLUG FMALE 53POS GOLD |
| 35 | ||
| 6312 | Elesa SPA | BT-B, FLUTED KNOBS, BRASS BOSS, |
| 8 | ||
| 66253263127 | MAGELLAN DISTRIBUTION | 12 x 1-1/2 x 5 In. SG Toolroom W |
| 7 | ||
| DNC-63-125-PPV-A | Festo | STANDARDS-BASED CYLINDER RoHS : Compliant |
| 5 | ||
| 6312 | Pomona Electronics | SMD GRABBER GREEN/YLW SCKT PIN RoHS : Compliant | 0 | |||
![]() Avnet Americas | 1-329631-2 | TE Connectivity | Connector Accessory, Jam Nut, BNC Connectors - Bulk (Alt: 1-329631-2) RoHS : Compliant |
| 39,104 | |
| 87631-2 | TE Connectivity | - Bulk (Alt: 87631-2) RoHS : Compliant |
| 17,312 | ||
| R222M46312 | Radiall | - Bulk (Alt: R222M46312) RoHS : Not Compliant |
| 425 | ||
| 5413631-2 | TE Connectivity | - Bulk (Alt: 5413631-2) RoHS : Compliant |
| 211 | ||
| ST5M1631-23 | Glenair Inc | - Bulk (Alt: ST5M1631-23) RoHS : Not Compliant |
| 134 | ||
| G63126NF10 | Glenair Inc | - Bulk (Alt: G63126NF10) RoHS : Not Compliant |
| 6 | ||
| CD6312 | Microchip Technology Inc | - Bulk (Alt: CD6312) RoHS : Not Compliant |
| 0 | ||
| FW-29-03-G-D-163-120 | Samtec Inc | Board Stackers & Spacers, Pin Header, 4.14 mm, 58 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Bulk (Alt: FW-29-03-G-D-163-120) RoHS : Compliant | 0 | |||
| FW-42-03-F-D-163-120 | Samtec Inc | Board Stackers & Spacers, Pin Header, 4.14 mm, 84 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Bulk (Alt: FW-42-03-F-D-163-120) RoHS : Compliant | 0 | |||
| RJE721886312 | Amphenol Corporation | 8P8C, RA, CAT5E, SHIELD, RECESSED PROFILE, WITH LEDS - Trays (Alt: RJE721886312) RoHS : Not Compliant | 0 | |||
| JANS1N6312CUS/TR | Microchip Technology Inc | - Tape and Reel (Alt: JANS1N6312CUS/TR) RoHS : Not Compliant |
| 0 | ||
766163120GP![]() | CTS Corporation | Fixed Network Resistor, 12 ohm, Isolated, 8 Resistors, Gull Wing, ? 2%, 50 V, 240 mW, ? 200ppm/?C - Bulk (Alt: 766163120GP) RoHS : Compliant |
| 0 | ||
| 77063121P | CTS Corporation | - Bulk (Alt: 77063121P) RoHS : Compliant |
| 0 | ||
| CTR06312002FWS | Vishay Intertechnologies | - Bulk (Alt: CTR06312002FWS) RoHS : Compliant | 0 | |||
| M39012/56-3128 | Amphenol Corporation | - Bag (Alt: M39012/56-3128) RoHS : Compliant |
| 0 | ||
![]() Newark | 1-329631-2 | TE Connectivity | NUT, BNC CONNECTOR LEAD, JAM NUT; RoHS : Compliant |
| 5,372 | |
| 963120174 | Wurth Elektronik | SPACER, ROUND, 12MM, BRASS; RoHS : Compliant |
| 1,896 | ||
| L17D4K63126 | Amphenol Communications Solutions | DUST COVER, 25POS D SUB PLUG CONNECTOR; RoHS : Compliant |
| 427 | ||
| 214763-1225 | Molex | CABLE ASSY, CRIMP PIN-FREE END, 17.7"; RoHS : Compliant |
| 180 | ||
| 2086-3124/300-000 | WAGO Innovative Connections | TB, WIRE TO BRD, 4POS, 16AWG; Pitch Spacing:5mm; No. of Positions:4Positions; Wire Size AWG Min:24AWG; Wire Size AWG Max:16AWG; Conductor Area CSA:1.5mm²; Wire Connection Method:Push In; Rated Current:17.5A; Rated Voltage:630V RoHS Compliant: Yes RoHS : Compliant |
| 168 | ||
| 214763-1223 | Molex | CABLE ASSY, CRIMP PIN-FREE END, 8.9"; RoHS : Compliant |
| 111 | ||
| 214763-1213 | Molex | CABLE ASSY, CRIMP PIN-FREE END, 8.9"; Connector to Connector:Crimp Pin to Free End; Cable Length - Imperial:8.9"; Cable Length - Metric:225mm; Product Range:Micro-Fit 3.0 OTS 214763 Series; Jacket Color:Black RoHS Compliant: Yes RoHS : Compliant |
| 100 | ||
| 1SNK506312R0000 | TE Connectivity | TERMINAL BLOCK, DINRAIL, 2POS, 10AWG; No. of Positions:2Positions; Wire Size AWG Min:-; Wire Size AWG Max:10AWG; Conductor Area CSA:4mm²; Wire Connection Method:Screw; Rated Current:26A; Rated Voltage:400V; No. of Levels:1 RoHS Compliant: Yes RoHS : Compliant |
| 49 | ||
| 203263-1234 | Molex | RECT CONTACT, PIN, SMT; RoHS : Compliant |
| 47 | ||
| 46436-3129 | Molex | RECT POWER CONN, R/A RCPT, 20POS, 5ROW; RoHS : Compliant |
| 36 | ||
| 638363122007 | Wurth Elektronik | CONN, R/A HDR, STAMPED TAB, 7P, 7.62MM; RoHS : Compliant |
| 36 | ||
CFM-8038BF-2130-631-22![]() | Same Sky | DC FAN, 63.2DBA, 24V, 23.04W, 80X38MM; RoHS : Compliant |
| 26 | ||
| 0912-6312-010 | Amphenol SV Microwave | RF ATTENUATOR, 1DB, 0.5W, 50 OHM; RF Attenuator Interface Type:SMP Plug to SMP Jack; Attenuation:1dB; Frequency Range:DC to 40GHz; Input Power:500mW; Impedance:50ohm; Attenuator Body Material:Stainless Steel, Beryllium Copper RoHS Compliant: Yes RoHS : Compliant |
| 24 | ||
| 1129-6312 | Amphenol SV Microwave | RF ADAPTOR, SMA PLUG-JACK, 50 OHM, 18GHZ; Convert From Coax Type:SMA; Convert From Gender:Plug; Convert To Coax Type:SMA; Convert To Gender:Jack; Adapter Body Style:Straight Adaptor; Impedance:50ohm; Connector Type:SMA Coaxial RoHS Compliant: Yes RoHS : Compliant |
| 10 | ||
| DFM-63-125-P-A-KF | Festo | CYLINDER, DBL ACTING, 63MM, 10BAR, 125MM; RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | PD86-3-1278-TMCL | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 67 | |
| PD86-3-1260-CANOPEN | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 44 | ||
| PD86-3-1278-CANOPEN | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 38 | ||
| PD86-3-1260-TMCL | Analog Devices Inc | PANdrive™/ Smart Stepper Motor |
| 23 | ||
![]() RS | 1SNK506312R0000 | TE Connectivity | ZS4-S-T2.3-R1 SCREW CLAMP TERMINAL BLOCK, DISCONNECT WITH BLADE, GREY, POLYAMIDE RoHS : Compliant |
| 100 | |
| 656-3123-304F | Dialight | PANEL MOUNT INDICATOR, 1/2 INCH, DOME RED/GREEN, 12VDC WITH TERMINALS RoHS : Compliant |
| 47 | ||
| 2863123 | RS Pro | 1M SNAGLESS CAT6 PATCH CABLE - GREEN |
| 12 | ||
| 2453631 (25530844) (HXLI203702000-050RS) | RS Pro | 3/8 X 2, IN HEX HEAD LAG BOLT, GRADE A, ZINC PLATED |
| 9 | ||
| 760308101103 (8631242) | Wurth Elektronik | WE-WPCC WIRELESS CHARGING COIL 6.5UH 3A |
| 8 | ||
| 66312 | Klein Tools Inc | CENTER PUNCH, 3/8IN SHANK X 5IN LONG |
| 7 | ||
| 2451631 (25532750) (FHSIA0430175-050RS) | RS Pro | SCREW, 7/16-14 X 1 3/4 FLAT SOCKET CAP, PLAIN FINISH |
| 5 | ||
| 1236312 | RS Pro | THERMOCOUPLE TYPE T, 16.4 FT (5M) 500F (260C) MAX 1/0.2 STRANDING 22AWG |
| 3 | ||
| 6312-2NSEC3 | Nachi America | BALL BEARING, 6300 SERIES DEEP GROOVE RADIAL BALL BEARING |
| 1 | ||
| 6312 | SKF | DEEP GROOVE BALL BEARING |
| 0 | ||
| 6312 | Koyo Encoder Inc | DEEP GROOVE BALL BEARINGS, 60MM ID, 130MM OD |
| 0 | ||
| 6312 | FAG Bearings | DEEP GROOVE BB, SINGLE ROW, 60MM ID, 130MM OD, 31MM WIDTH |
| 0 | ||
| 6312 | RACO | PEDASTAL HOUSE FACE PLATE - SINGLE RECEPTACLE |
| 0 | ||
| 6312 | Adafruit Industries | ESP32-S2 REVERSE TFT FEATHER WITH WFL - STEMMA QT / QWIIC |
| 0 | ||
| 6312 | ELESA USA | BT.12 B-M5, FLUTED KNOBS, BRASS BOSS, THREADED BLIND HOLE |
| 0 | ||
![]() Microchip Technology Inc | MCP16312-E/MS | Microchip Technology Inc | 30V Input, PWM Synchronous Buck Switching Regulator, MSOP, Projected EOL: 2040-12-16 RoHS : Compliant |
| 52,458 | |
| MIC5363-1.2YMT-TR | Microchip Technology Inc | Single 300mA Low Dropout LDO, UDFN, Projected EOL: 2041-01-20 RoHS : Compliant |
| 29,799 | ||
| MCP16312T-E/MSVAO | Microchip Technology Inc | 30V Input, PWM Synchronous Buck Switching Regulator, MSOP, Projected EOL: 2046-03-01 RoHS : Compliant |
| 2,500 | ||
| JANS1N6312US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 471 | ||
| 1N6312DUS | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 387 | ||
| 1N6312US | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 195 | ||
| JANS1N6312DUS | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 88 | ||
| JANS1N6312 | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 56 | ||
| JAN1N6312CUS | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 11 | ||
| 6312 | Microchip Technology Inc | PULSE DISTRIBUTION AMPLIFIER (E.G., PPS, DC IRIG), 1X8, WITH, Projected EOL: 2051-01-13 - Contact for Pricing | 0 | |||
| CD6312 | Microchip Technology Inc | Voltage Regulator _ Die, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| CDLL6312 | Microchip Technology Inc | Voltage Regulator _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| JAN1N6312C | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANS1N6312/TR | Microchip Technology Inc | Voltage Regulator _ B-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANS1N6312CUS/TR | Microchip Technology Inc | Voltage Regulator _ B-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 1631-256-AL-6 | RAF Electronic Hardware | 2,322 | |||
| CAL2-3716-312 | Sherex / Atlas | 601 | ||||
| 156312-2 REV.A | RAF Electronic Hardware | 398 | ||||
| 1-329631-2 | TE Connectivity | RoHS : Compliant | 252 | |||
| 1631-256-A-6 MODL=.400 | RAF Electronic Hardware | 201 | ||||
| 46-312467-1 | RAF Electronic Hardware | 188 | ||||
| AEHS8-616-312 | Sherex / Atlas | 170 | ||||
| 58-26-312-24 | Southco | 100 | ||||
| 1631-256-AL-6 MODL=.400 | RAF Electronic Hardware | 95 | ||||
| 1631-256-AL | RAF Electronic Hardware | 67 | ||||
| AES14R086312DR2LP3 | SOCKET SCREWS | 43 | ||||
| CAL2-3716-312 | MISC. INDUSTRIAL HRD | 30 | ||||
| 58-36-31-24 | Southco | 12 | ||||
| 68-36-3125A | SOCKET SCREWS | 7 | ||||
| 5-87631-2 | TE Connectivity | RoHS : Compliant | 2 | |||
![]() Rochester Electronics | SN74ACT3631-20PQ![]() | Texas Instruments | FIFO, 512X36, 13ns, Synchronous, CMOS, PQFP132 RoHS : Compliant |
| 972 | |
SN74ALVC3631-20PQ![]() | Texas Instruments | Bi-Directional FIFO, 512X36, 11.5ns, Synchronous, CMOS, PQFP132 RoHS : Not Compliant |
| 428 | ||
| PT6312N | Texas Instruments | Switching Regulator, Voltage-mode, 2A, 600kHz Switching Freq-Max, Hybrid, PSMA12 RoHS : Not Compliant |
| 49 | ||
| PT6312R | Texas Instruments | Switching Regulator, 2A, 600kHz Switching Freq-Max, Hybrid, PSMA12 RoHS : Not Compliant |
| 12 | ||
SN74ACT3631-20PCB![]() | Texas Instruments | FIFO, 512X36, 13ns, Synchronous, CMOS, PQFP120 RoHS : Compliant |
| 643 | ||
SN74ALVC3631-20PCB![]() | Texas Instruments | Bi-Directional FIFO, 512X36, 11.5ns, Synchronous, CMOS, PQFP120 RoHS : Not Compliant |
| 249 | ||
| ISL6312CRZ-TR5338C | Intersil Corporation | Four-Phase Buck PWM Controller for Intel VR10, Vr11 and AMD, 48Ld-QFN RoHS : Compliant |
| 7,800 | ||
| MAX6312UK29D3+ | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Compliant |
| 2,519 | ||
MAX6312UK29D3+T![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.9V, CMOS, PDSO5 RoHS : Compliant |
| 6,983 | ||
| MAX6312UK43D3 | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Not Compliant |
| 1,710 | ||
| MAX6312UK43D3+ | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Compliant |
| 873 | ||
| MAX6312UK46D3 | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Not Compliant |
| 3,355 | ||
| MAX6312UK46D3+ | Maxim Integrated Products | MAX6312 5-Pin, Multiple-Input, Programmable Reset IC RoHS : Compliant |
| 498 | ||
MAX6312UK46D3+T![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.6V, CMOS, PDSO5 RoHS : Compliant |
| 2,500 | ||
| ISL6312ACRZ-T | Renesas Electronics Corporation | Switching Controller, Current/voltage-mode, 1000kHz Switching Freq-Max, PQCC48 RoHS : Compliant |
| 4,000 | ||
![]() Sager | FW-29-03-G-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | ||
| FW-37-03-L-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-42-03-F-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| EX/M63-125/TC | ABB Group | Conduit Fittings & Accessories | 0 | |||
| 82463-1266 | OMRON Electronic Components | DIP Switches / SIP Switches UM5-1266-CX1 | 0 | |||
| 9-2176312-6 | TE Connectivity | RP 1E 0.1W 121K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 4-2176312-3 | TE Connectivity | RP 1E 0.1W 34K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9763121020 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9763121101 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9763121138 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9863121043 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| FW-32-03-G-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-40-03-L-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-46-03-F-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 863125-1 | TE Connectivity | Standard Circular Connector VERSATILE RUGGEDIZED RoHS : Compliant | 0 | |||
![]() TME | G97R26312HR | Amphenol Corporation | PIN: 74; 300V; soldering; Plating: gold-plated; -40÷85°C |
| 880 | |
| GN 631-21-6.1 | Elesa+Ganter | Foot; Base dia: 21mm; technopolymer POM; H: 10mm |
| 0 | ||
| ONPOW6312C-10E/J/W/24V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312C-10E/J/W/6V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312C-10ZE/J/G/12V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 0 | ||
| ONPOW6312C-10ZE/J/Y/24V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 0 | ||
| ONPOW6312F-10E/J/G/12V/A | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312F-10E/J/R/6V/A | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312F-10E/J/Y/6V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312F-10ZE/J/R/12V/A | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 0 | ||
| ONPOW6312H-10E/J/G/24V/A | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312H-10E/J/R/6V/A | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312H-10E/J/Y/6V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312C-10E/J/Y/6V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-(ON) |
| 0 | ||
| ONPOW6312C-10ZE/J/R/24V/S | Onpow | Switch: vandal resistant; Pos: 2; SPST-NO; 2A/36VDC; IP65; OFF-ON |
| 0 | ||
![]() ComSIT USA | MCP16312TEMS | Microchip Technology Inc | AVAILABLE EU | 1,030 | ||
![]() ComSIT USA | FDC6312P![]() | Fairchild Semiconductor Corporation | DUAL P-CHANNEL 1.8V POWERTRENCH SPECIFIED MOSFET Small Signal Field-Effect Transistor, 2.3A I(D), 20V, 2-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 69,000 | ||
| MAX6312UK46D3T | Maxim Integrated Products | 5-PIN, MULTIPLE-INPUT, PROGRAMMABLE RESET IC Power Supply Support Circuit, Fixed, 1 Channel, +4.6VV, CMOS, PDSO5 RoHS : Not Compliant | 2,470 | |||
| Y31B63127FPLFG | C&K Switches | Pushbutton Switch, SMD, rated for signal-level applications, for user interface and control functions RoHS : Compliant | 2,000 | |||
| XTL661500HIK28636312TR | SIWARD Crystal Technology Co Ltd | Electronic Component RoHS : Compliant | 1,000 | |||
| 0263125HAT1L | Littelfuse Inc | AXIAL LEAD AND CARTRIDGE FUSE Electric Fuse, Very Fast Blow, 0.125A, 250VAC, 50A (IR), Through Hole, PICO RoHS : Compliant | 200 | |||
| 736312 | WAGO Innovative Connections | PCB TERMINAL STRIP Strip Terminal Block, 10A, 2.5mm2, 2 Row(s), 2 Deck(s) RoHS : Not Compliant | 100 | |||
| 9663127602 | HARTING Technology Group | STAMPED SOLDER PIN, ANGLED WITHOUT GROUNDING BOARD LOCK FEMALE CONNECTOR D Subminiature Connector, 25 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, #4-40, Plug RoHS : Compliant | 41 | |||
![]() Interstate Connecting Components | M39012/56-3128 | Amphenol SV Microwave | SMA MALE CONNECTOR, R/A F INDIVIDUAL BAG RoHS : Compliant |
| 2 | |
| RJE721886312 | Amphenol Commercial | 8P8C, RA, CAT5E, SHIELD, RECES | 0 | |||
| 9-2176312-6 | TE Connectivity | RP 1E 0.1W 121K 0.1% 25PPM 1K RoHS : Compliant |
| 0 | ||
| 4-2176312-3 | TE Connectivity | RP 1E 0.1W 34K 0.1% 25PPM 1K R RoHS : Compliant |
| 0 | ||
| 91-631228-54H | Amphenol Aerospace | 0 | ||||
| 5-2176312-0 | TE Connectivity | RP 1E 0.1W 40K2 0.1% 25PPM 1K RoHS : Compliant |
| 0 | ||
| 3-644631-2 | TE Connectivity | 02P MTA156 HDR ASSY STR LF RoHS : Compliant |
| 0 | ||
| 27963-12T12 (1000 PCS PACK) | ITT Interconnect Solutions | 27963-12T12 (1000 PCS PACK) 000902300 VEAM | 0 | |||
| 1-2176312-6 | TE Connectivity | RP 1E 0.1W 17K8 0.1% 25PPM 1K RoHS : Compliant |
| 0 | ||
| 155631-2050 | ITT Interconnect Solutions | MKJ1B7Z6-4PF | 0 | |||
| T1260163125-000 | TE Connectivity | H16B-TGBS-M25 RoHS : Compliant |
| 0 | ||
| 1-2176312-7 | TE Connectivity | RP 1E 0.1W 18K2 0.1% 25PPM 1K RoHS : Compliant |
| 0 | ||
| T1620063125-000 | TE Connectivity | H6B-SDR-M25 RoHS : Compliant |
| 0 | ||
| 155631-2051 | ITT Interconnect Solutions | MKJ1B7Z6-4SF | 0 | |||
| 336312-12-0300 | Amphenol RF |
| 0 | |||
![]() NexGen Digital | 1-329631-2 | TE Connectivity | RoHS : Compliant | 90 | ||
| 203263-1234 | Molex | 20 | ||||
![]() PEI Genesis | M39012/56-3128 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | |
| 91-631228-54H | Amphenol Corporation |
| 0 | |||
| S3596-3-12A | SOURIAU-SUNBANK |
| 0 | |||
| 336312-12-0300 | Amphenol RF |
| 0 | |||
| M85049/63-12N | Amphenol PCD |
| 0 | |||
| 1129-6312 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 10-584463-12P | Amphenol Corporation |
| 0 | |||
| 0912-6312-010 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 23A02863-12 | SOURIAU-SUNBANK |
| 0 | |||
| 10-497363-125 | Amphenol Corporation |
| 0 | |||
| 10-584463-12I | Amphenol Corporation |
| 0 | |||
| 80-560631-28J | Amphenol Corporation |
| 0 | |||
| M85049/63-12Z | Amphenol PCD |
| 0 | |||
| 68-580163-12S | Amphenol Corporation |
| 0 | |||
| L17D4K63126 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 4-87631-2 | TE Connectivity | Connectors RoHS : Compliant |
| 717 | |
| 6-2176312-3 | TE Connectivity | Electronic Component RoHS : Compliant |
| 660 | ||
| 2176312-2 | TE Connectivity | Electronic Component RoHS : Compliant |
| 660 | ||
| 179631-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 326 | ||
| 26312-1 | TE Connectivity | DEUTSCH CONNECTOR 26312-1 |
| 323 | ||
| ZPF000000000106312 | TE Connectivity | CONNECTOR (TE INTERNAL REF, MFR PN N/A) |
| 281 | ||
| 10-584463-12P | Amphenol Corporation | CONNECTOR |
| 275 | ||
| 10-584463-12I | Amphenol Corporation | CONNECTOR |
| 275 | ||
| 5-87631-2 | TE Connectivity | TE COMPONENT 5-87631-2 RoHS : Compliant |
| 66 | ||
| T1629163125-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 46 | ||
| 1-329631-2 | TE Connectivity | MINI RF COMP/SUBASSY RoHS : Compliant |
| 29 | ||
| 42-00-66312 | TE Connectivity | SENSOR 42-00-66312 |
| 7 | ||
| 10-417631-239 | Amphenol Corporation | Connector |
| 6 | ||
| T1270163129-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 4 | ||
| G63126-10 | Glenair Inc | CONNECTOR ACCESSORIES |
| 1 | ||
![]() Richardson RFPD | 935281363128 | NXP Semiconductors | I2C/SPI Interface 400kHz 2.7V/3.6V 24-Pin HVQFN EP RoHS : Compliant | 0 | ||
| R595363125 | Radiall | RF Switch SPDT 0MHz to 6GHz 85dB RoHS : Not Compliant |
| 0 | ||
| 126312 | Wakefield-Vette | HEAT PIPE RoHS : Compliant |
| 0 | ||
| 1-329631-2 | TE Connectivity | Connector Accessories Jam Nut Straight Brass Silve RoHS : Compliant | 0 | |||
| 906-31-2-15-2-B-0 | Wakefield-Vette | Heat Sink Passive Straight Screw Mount Aluminum 2. RoHS : Compliant |
| 0 | ||
| R578863121 | Radiall | RF Switch DPDT 0MHz to 40GHz 50dB 9-Pin RoHS : Not Compliant |
| 0 | ||
| LFVCXO056312BULK | IQD Frequency Products | Oscillator VCXO 156.25MHz ±50ppm (Stability) LVPEC RoHS : Compliant | 0 | |||
| R571F63121 | Radiall | RF Switch SPDT 0MHz to 22GHz 55dB RoHS : Not Compliant |
| 0 | ||
| MCP16312-E/MS | Microchip Technology Inc | Conv DC-DC 4.4V to 30V Synchronous Step Down Singl RoHS : Compliant | 0 | |||
| R578F63121 | Radiall | RF Switch DPDT 0MHz to 22GHz 50dB RoHS : Not Compliant |
| 0 | ||
| MCP16312T-E/MS | Microchip Technology Inc | Conv DC-DC 4.4V to 30V Synchronous Step Down Singl RoHS : Compliant | 0 | |||
| 906-31-2-28-2-B-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant | 0 | |||
| K050631230PM0E050 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| 906-31-2-12-2-B-0 | Wakefield-Vette | Pin Fin Heat Sink RoHS : Compliant | 0 | |||
| 46-3-12 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 35363-1260 | Molex | INSTOCK RoHS : Compliant | 80,024 | ||
| 1-329631-2 | TE Connectivity | INSTOCK RoHS : Compliant | 64,326 | |||
| FDC6312P | onsemi | INSTOCK RoHS : Compliant | 27,300 | |||
| 87631-2 | TE Connectivity | INSTOCK RoHS : Compliant | 10,003 | |||
| 263-120-RC | Xicon Passive Components | INSTOCK RoHS : Compliant | 4,378 | |||
| 4-87631-2 | TE Connectivity | INSTOCK RoHS : Compliant | 1,929 | |||
| EB 2200/6.3 12X25 | INSTOCK | 400 | ||||
| 1631203E | Kobiconn | INSTOCK | 330 | |||
| 35631231051 | INSTOCK | 90 | ||||
| TXC-06312BROG.B3A | Transwitch Corporation | INSTOCK | 64 | |||
| MDSTBV 2,5/ 3-G-5,08 BK /1763126 | Phoenix Contact | INSTOCK | 40 | |||
| 35631231- | Spelsberg els UK Ltd | INSTOCK | 8 | |||
| 686312124422- | Wurth Elektronik | INSTOCK | 4 | |||
| 1631203E | INSTOCK | 3 | ||||
| ISL6312CRZ | INSTOCK | 1 | ||||
![]() Avnet Abacus | 872631223 | Molex | (Alt: 872631223) RoHS : Compliant | 6,160 | ||
| 1-329631-2 | TE Connectivity | Connector Accessory Jam Nut BNC Connectors (Alt: 1-329631-2) RoHS : Compliant | 1,000 | |||
| 65863-122LF | Amphenol Corporation | Conn Ejector Header HDR 26 POS 254mm Solder ST ThruHole Tray (Alt: 65863-122LF) RoHS : Compliant | 400 | |||
| 77063121P | CTS Corporation | (Alt: 77063121P) RoHS : Compliant | 0 | |||
| 459846312 | Molex | (Alt: 459846312) RoHS : Compliant | 0 | |||
| 3-644631-2 | TE Connectivity | (Alt: 3-644631-2) RoHS : Compliant | 0 | |||
| 9-2176312-6 | TE Connectivity | SMD Chip Resistor 121 kOhm 01 100 mW 0402 1005 Metric Thin Film High Power Precision (Alt: 9-2176312-6) RoHS : Compliant | 0 | |||
| 6312/2 TDHP | ebm-papst | DC Axial Fan 12 V Circular 172 mm 51 mm Ball Bearing 353 CFM (Alt: 9295420022) RoHS : Compliant | 0 | |||
766163120GP![]() | CTS Corporation | Fixed Network Resistor 12 ohm Isolated 8 Resistors Gull Wing 2 50 V 240 mW 200ppmC (Alt: 766163120GP) RoHS : Compliant | 0 | |||
| RK16312A0BJN | Alpine Electronics (Asia) Ltd | Potentiometers (Alt: RK16312A0BJN) RoHS : Compliant | 0 | |||
| MAL213631221E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 220 uF 50 V 20 7000 hours 105C Radial Leaded (Alt: MAL213631221E3) RoHS : Compliant | 0 | |||
| M39012/56-3128 | Amphenol Corporation | (Alt: M39012/56-3128) RoHS : Compliant | 0 | |||
| 336312-12-0300 | Amphenol Corporation | RF Coaxial Cable Assembly 118 300 mm 113 mm Micro AMC Right Angle Plug (Alt: 336312-12-0300) RoHS : Compliant | 0 | |||
| 1SNK506312R0000 | TE Connectivity | (Alt: 1SNK506312R0000) RoHS : Compliant | 0 | |||
| 27963-12T12 (1000 PCS PACK) | ITT Interconnect Solutions | Contact SKT Crimp ST Cable Mount (Alt: 000902300) RoHS : Compliant | 0 | |||
![]() Avnet Asia | PGL6312.221AHLT | Pulse Electronics Corporation | POWER INDUCTOR 220 NH (Alt: PGL6312.221AHLT) RoHS : Compliant |
| 31,500 | |
| PGL6312.151AHLT | Pulse Electronics Corporation | (Alt: PGL6312.151AHLT) RoHS : Compliant |
| 3,900 | ||
| PGL6312.121HLT | Pulse Electronics Corporation | (Alt: PGL6312.121HLT) RoHS : Compliant |
| 600 | ||
| G97R26312HR | Amphenol Corporation | Card Edge Connector, Dual Side, 1.57 mm, 148 Contacts, Surface Mount, Right Angle, Solder (Alt: G97R26312HR) RoHS : Compliant |
| 40 | ||
| PGL6312.900HLT | Pulse Electronics Corporation | (Alt: PGL6312.900HLT) RoHS : Compliant | 0 | |||
| 0511631200 | Molex | (Alt: 0511631200) RoHS : Compliant | 0 | |||
| 2203631200 | Molex | FFC / FPC Board Connector, 120 Contacts, 1 Row, 0.4mm, Bottom, Gold, PCB Mount, Right Angle, 0.3mm (Alt: 2203631200) RoHS : Compliant | 0 | |||
| PGL6312.151HLT | Pulse Electronics Corporation | (Alt: PGL6312.151HLT) RoHS : Compliant | 0 | |||
| G66R46312HR | Amphenol Corporation | Z-LINK RA 0.5C 92OHM (Alt: G66R46312HR) RoHS : Compliant | 0 | |||
| PGL6312.101AHLT | Pulse Electronics Corporation | POWER INDUCTOR 100UH (Alt: PGL6312.101AHLT) RoHS : Compliant | 0 | |||
| AT62-201-1631-22 | Amphenol Corporation | (Alt: AT62-201-1631-22) RoHS : Compliant | 0 | |||
| PGL6312.101HLT | Pulse Electronics Corporation | (Alt: PGL6312.101HLT) RoHS : Compliant | 0 | |||
| 1563126-1 | TE Connectivity | Connector Accessories Secondary Lock For 10POS Tab Housing (Alt: 1563126-1) RoHS : Compliant | 0 | |||
| PGL6312.221HLT | Pulse Electronics Corporation | POWER INDUCTOR, 120NH (Alt: PGL6312.221HLT) RoHS : Compliant | 0 | |||
| 8-2176312-4 | TE Connectivity | Res Precision High Power Thin Film 0402 90.9k Ohm 0.1% 1/16W ?25ppm/?C Molded Paper T/R (Alt: 8-2176312-4) RoHS : Compliant | 0 | |||
![]() Avnet Silica | AP7363-12D-13 | Diodes Incorporated | DIIAP736312D13 (Alt: AP7363-12D-13) RoHS : Compliant | 2,500 | ||
| FDC6312P | onsemi | Dual MOSFET P Channel 20 V 23 A (Alt: FDC6312P) RoHS : Compliant | 0 | |||
| JANS1N6312US | Microchip Technology Inc | (Alt: JANS1N6312US) RoHS : Not Compliant | 0 | |||
| MCP16312-E/MS | Microchip Technology Inc | (Alt: MCP16312-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MS | Microchip Technology Inc | (Alt: MCP16312T-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MNY | Microchip Technology Inc | (Alt: MCP16312T-E/MNY) RoHS : Compliant | 0 | |||
| DSC1123DE5-320.6312 | Microchip Technology Inc | MEMS OSC LVDS 3206312MHz 10PPM 2533V 20 to 70C 25 x 20mm (Alt: DSC1123DE5-320.6312) RoHS : Compliant | 0 | |||
![]() DB Roberts | SO-63.1-20ZI | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. |
| 11 | |
| CAH2-3716-312B | SHEREX FASTENING SO | RNUT 3/8-16 312 STL SHX CE | 0 | |||
| AELB-616-312 | PennEngineering (PEM) | 3/8-16 | 0 | |||
| 8596-3124-A-7 | RAF Electronic Hardware | 0 | ||||
| 1631-256-AL | RAF Electronic Hardware | 0 | ||||
| TSO4-6256-312 | PennEngineering (PEM) | These standoffs offer oversized body for increased bearing surface wall thickness and performance. | 0 | |||
| 1631-256-AL-6 | RAF Electronic Hardware | ROUND FEMALE STANDOFFS | 0 | |||
| 58-26-312-24 | Southco | 0 | ||||
| AELS8-616-312BS | PennEngineering (PEM) | 0 | ||||
| 47-63-121-24 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 063120434E | Essentra Components | 0 | ||||
| 063123233E | Essentra Components | 0 | ||||
| SOA-63.1-20 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| 58-36-31-24 | Southco | 0 | ||||
| 063120439E | Essentra Components | 0 | ||||
![]() EBV Elektronik | 1N6312US | Microchip Technology Inc | (Alt: 1N6312US) RoHS : Compliant | 0 | ||
| FDC6312P | onsemi | Dual MOSFET P Channel 20 V 23 A (Alt: FDC6312P) RoHS : Compliant | 0 | |||
| JANS1N6312 | Microchip Technology Inc | (Alt: JANS1N6312) RoHS : Compliant | 0 | |||
| MCP16312-E/MS | Microchip Technology Inc | (Alt: MCP16312-E/MS) RoHS : Compliant | 0 | |||
| HCPL-5631#200 | Broadcom Limited | Optocoupler LogicOut Open Collector DCIN 2CH 8Pin CDIP (Alt: HCPL-5631#200) RoHS : Not Compliant | 0 | |||
| JANTX1N6312US | Microchip Technology Inc | (Alt: JANTX1N6312US) RoHS : Not Compliant | 0 | |||
| MCP16312T-E/MS | Microchip Technology Inc | (Alt: MCP16312T-E/MS) RoHS : Compliant | 0 | |||
| MCP16312T-E/MNY | Microchip Technology Inc | (Alt: MCP16312T-E/MNY) RoHS : Compliant | 0 | |||
| JANTX1N6312US/TR | Microchip Technology Inc | (Alt: JANTX1N6312US/TR) RoHS : Not Compliant | 0 | |||
| MIC5363-1.2YMT-TR | Microchip Technology Inc | (Alt: MIC5363-1.2YMT-TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | CPH6312-TL-E | onsemi | Stock, Ship Today | 252,000 | ||
![]() Maritex | 1563124-1 | TE Connectivity | Automotive Connectors; 1563124-1; TE CONNECTIVITY; Red; Yes RoHS : Compliant |
| 15,881 | |
| 1563126-1 | TE Connectivity | Automotive Connectors; 1563126-1; TE CONNECTIVITY; Red; Yes; 16.2 mm RoHS : Compliant |
| 10,288 | ||
| 1563123-1 | TE Connectivity | Automotive Connectors; 1563123-1; TE CONNECTIVITY; Black; 10; Yes RoHS : Compliant |
| 591 | ||
| FDC6312P | onsemi | MOSFETs; FDC6312P; ON SEMICONDUCTOR; 2.3 A; 115 m?; 960 mW; 2 RoHS : Compliant |
| 107 | ||
![]() Master Electronics | CD6312 | Microchip Technology Inc | Voltage Regulator RoHS : Compliant |
| 0 | |
| FW-29-03-G-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | ||
| FW-37-03-L-D-163-120 | Samtec Inc | .050'' BOARD SPACERS RoHS : Compliant |
| 0 | ||
| FW-42-03-F-D-163-120 | Samtec Inc | .050'' BOARD SPACERS RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-163-125 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-163-128 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-163-121 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-263-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EX/M63-125/TC | Thomas & Betts | Adapter - Thread Converter - M63 Male Thread to 1-1/4 Inch NPT Female Thread - Suitable for Use in Zones 1 2 21 and 22 Ex e and Ex d - Brass. RoHS : Compliant |
| 0 | ||
| 86312CY-SL001 | Alpha Wire | Slate - 304.8m (1000ft)/Spool RoHS : Compliant |
| 0 | ||
| 9-2176312-6 | TE Connectivity | RP 1E 0.1W 121K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 4-2176312-3 | TE Connectivity | RP 1E 0.1W 34K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| JANS1N6312CUS/TR | Microchip Technology Inc | 3.3V 20mA 24 Ohms Voltage Regulator SQ SMT TR RoHS : Compliant |
| 0 | ||
| M39012/56-3128 | Amphenol SV Microwave | SMA Male Connector R/A for RG-58 Cable RoHS : Compliant |
| 0 | ||
| FW-32-03-G-D-163-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | ||
![]() Neutron USA | CFM-8038BF-2130-631-22 | CUI Inc | DC axial fan, sq80x38 mm, 24Vdc 1.15A, ball 13000 RPM 98.42 CFM TSPWM, 4wire |
| 50 | |
| 09663126600 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-254 25P RoHS : Compliant |
| 50 | ||
| RK1631210AX9 | Alps Alpine Co Ltd | Potentiometers Knurled 15mm 10k RoHS : Compliant |
| 50 | ||
| 09140063121 | HARTING Technology Group | Heavy Duty Power Connectors Han Shielded Power Module female RoHS : Compliant |
| 50 | ||
| 6312/2TDHP | ebm-papst | DC Fans 172x51 12V 353.1CFM 40W 5500RPM 60dBA BB |
| 50 | ||
| RK16312A0BKH | Alps Alpine Co Ltd | Potentiometers Metal Shaft RoHS : Compliant |
| 50 | ||
| TR-6312U | Macromatic Industrial Controls Inc | Time Delay Relay, Plug-in, Cycle (Off 1st), 24-240VAC/12-125VDC, 0.05S-100H |
| 50 | ||
| 09663126601 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-254 25 RoHS : Compliant |
| 50 | ||
| 09663126602 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP ANG73-284 09P RoHS : Compliant |
| 50 | ||
| 46-312.1Z10 | EAO AG | Switch Contact Blocks / Switch Kits Switching element, Slow-make switching element, Silver, 1 NC, Screw terminal RoHS : Compliant |
| 50 | ||
| 45-2631.2AH0.000 | EAO AG | Switch Actuators Mushroom-head pushbutton actuator illuminated green transparent D60 momentary front/housing metal levier RoHS : Compliant |
| 6 | ||
| P7-631242 | OTTO Engineering Inc | Basic / Snap Action Switches Low-Level Mil Sldr 5A SPST-DB, SPDT-DB |
| 3 | ||
| DFM-63-125-P-A-KF | Festo | Drive, guided, DFM-63-125-P-A-KF RoHS : Compliant |
| 1 | ||
| 906-31-2-15-2-B-0 | Wakefield-Vette | Heat Sinks Chipset Heat Sink with Clip, Pin Fin, 31mm Chip Size, 14.6mm Height, Aluminum RoHS : Compliant |
| 0 | ||
| 116312-03 | AMETEK Inc | Vacuum Motor, 240VAC, 5.7", 2-stage, Thru Flow, Example: 4.2A 106.5CFM 19117rpm 2.0" Orifice |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03063-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to N male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W03063-12 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3W03063-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03063-12 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components. |
| 2,938 | |
| PE35363-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to Reverse Thread SMA Male Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to reverse thread SMA male cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse thread SMA male cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse thread SMA cable connection on the other. Our SMA to reverse thread SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse thread SMA cable is a male to male coax assembly, PE35363-12, can also be known as a SMA plug to reverse thread SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse thread SMA plug cable assembly PE35363-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse thread SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35363-12 can also be used in the other direction and will be reverse thread SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse thread plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse thread SMA male cable 12 inch length using RG178 coax. |
| 119 | ||
| PE3C4063-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 12 inches. Snap-On MMBX Plug Right Angle to SMA Female Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug right angle to SMA female cable 12 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug right angle to SMA female cable 12 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and SMA cable connection on the other. Our right angle MMBX to SMA cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to SMA cable is a plug to female coax assembly, PE3C4063-12, can also be known as a right angle MMBX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA jack cable assembly PE3C4063-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4063-12 can also be used in the other direction and will be SMA female to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to SMA female cable 12 inch length using RG316-DS coax. |
| 95 | ||
| PE35563-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Female Bulkhead to MMCX Plug Right Angle Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly TNC female bulkhead to MMCX plug right angle cable 12 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to MMCX plug right angle cable 12 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to MMCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle MMCX cable connection on the other. Our TNC to right angle MMCX cable assembly has female gender on end 1 and plug on end 2. PE35563-12 can also be known as a TNC jack to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. TNC jack to MMCX male cable assembly PE35563-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle MMCX cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35563-12 RF cable are available on our downloadable PDF datasheet.PE35563-12 can also be used in the other direction and will be right angle MMCX plug to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to MMCX cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 83 | ||
| PE3W17863-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 12 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W17863-12 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17863-12 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W17863-12 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE3M0263-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Male Cable 12 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0263-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0263-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0263-12 between-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ pin to SMA male cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0263-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 48 | ||
| PE363-12 | Pasternack Enterprises |
| 43 | |||
| PE3C6363-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-500-LLPL, RF Cable Type: SPP-500-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.3-10 Male to 4.3-10 Male Low PIM Cable 12 Inch Length Using SPP-500-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 4.3-10 male low PIM cable 12 inch length using SPP-500-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 4.3-10 male low PIM cable 12 inch length using SPP-500-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP500-4310M-LP 4.3-10 cable connection on one end and TC-SPP500-4310M-LP 4.3-10 cable connection on the other. Our low PIM TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable is a male to male coax assembly, PE3C6363-12, can also be known as a low PIM TC-SPP500-4310M-LP 4.3-10 plug to TC-SPP500-4310M-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-SPP500-4310M-LP 4.3-10 plug to TC-SPP500-4310M-LP 4.3-10 plug cable assembly PE3C6363-12 is built with SPP-500-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP500-4310M-LP 4.3-10 cable assembly is manufactured with TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP500-4310M-LP 4.3-10 male to TC-SPP500-4310M-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP500-4310M-LP 4.3-10 plug to TC-SPP500-4310M-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP500-4310M-LP 4.3-10 to TC-SPP500-4310M-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-SPP500-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 4.3-10 male low PIM cable 12 inch length using SPP-500-LLPL coax using Times Microwave parts. |
| 10 | ||
| PE3C10763-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 2.4mm Male Cable 12 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10763-12 1.85mm male to 2.4mm male RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.4mm cable connection on the other. Our 1.85mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10763-12 can also be known as a 1.85mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10763-12 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C10763-12 1.85mm plug to 2.4mm plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10763-12 can also be used in the other direction and will be a 2.4mm male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.4mm RF cable assembly as per your requirements. |
| 4 | ||
| PE3W18063-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: LC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. LC Male to HN Male Right Angle Cable 12 Inch Length Using RG393 Coax., Radio frequency assembly LC male to HN male right angle cable 12 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The LC male to HN male right angle cable 12 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom LC to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a LC cable connection on one end and a right angle HN cable connection on the other. Our LC to right angle HN cable assembly has a male gender on end 1 and a male on end 2. PE3W18063-12 can also be known as a LC plug to right angle HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18063-12 RF cable has a FEP jacket of 0.390-inch diameter. The flexible RF cable has a between series connection. LC plug to HN plug cable assembly PE3W18063-12 is built with RG393 which is a flexible coax type. The Pasternack flexible LC cable assembly is manufactured with LC to right angle HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W18063-12 can also be used in the other direction and will be a right angle HN male to LC male cable assembly if the opposite connectivity is required. LC plug to HN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality LC to HN cable assembly for quick shipment worldwide. Variations of LC and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal LC to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7863-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly SMA male to SMA male low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C7863-12, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C7863-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable 12 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C10263-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Nickel, Connector 1 Body Plating: Gold over Copper, RF Cable Part Number: LMR-240-75-DB, RF Cable Type: LMR-240-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm F Male to 75 Ohm N Male Low Loss Cable 12 Inch Length Using 75 Ohm LMR-240-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm F male to 75 Ohm N male low loss cable 12 inch length using 75 Ohm LMR-240-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm F male to 75 Ohm N male low loss cable 12 inch length using 75 Ohm LMR-240-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to type N cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and N type cable connection on the other. Our low loss F type to type N cable assembly has male gender on end 1 and male on end 2. PE3C10263-12 can also be known as a low loss F type plug to N type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10263-12 RF cable has a PE jacket of 0.240-inch diameter. The RF cable has a between series connection. Type F plug to type N plug cable assembly PE3C10263-12 is built with LMR-240-75-DB which is a coax type. The Pasternack F cable assembly is manufactured with type F to type N cable connectors, has a 75 Ohm impedance. One connector features the crimp/solder attachment method and a nickel body with gold over copper plating, while the other has crimp/non-solder contact attachment method and nickel body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10263-12 can also be used in the other direction and will be type N male to F type male cable assembly if the opposite connectivity is required. Low loss type F plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type N cable assembly for quick shipment worldwide. Variations of type F and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal F to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C8263-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 12 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to type N cable is a male to male coax assembly, PE3C8263-12, can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to N type plug cable assembly PE3C8263-12 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8263-12 can also be used in the other direction and will be N type male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C10363-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 120 Inch Length Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male low PIM cable 120 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male low PIM cable 120 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 7/16 DIN to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10363-120 can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10363-120 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C10363-120 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE36963-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to Reverse Polarity SMA Male Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to reverse polarity SMA male cable 12 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity SMA male cable 12 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity SMA cable is a male to male coax assembly, PE36963-12, can also be known as a SMA plug to reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity SMA plug cable assembly PE36963-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to reverse polarity SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36963-12 can also be used in the other direction and will be reverse polarity SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity SMA male cable 12 inch length using RG316-DS coax. |
| 0 | ||
![]() TE Connectivity | 63127-1 | TE Connectivity | 250 FASTON REC 22-18 AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | Part Number: 63127-1 | Internal Number: 63127-1 | TE Connectivity RoHS : Compliant |
| 26,615 | |
| 87631-2 | TE Connectivity | 06 MODIV HSG DR MRKD .100 POL Number of Positions: 6 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching Standard Rectangular Connector | 6 Receptacle Housing With | Part Number: 87631-2 | Internal Number: 87631-2 | TE Connectivity RoHS : Compliant |
| 18,991 | ||
| 171631-2 | TE Connectivity | 070 TAB CONT GOLD Terminal Type: Tab Wire Size: 24 – 20 AWG Wire Size: .2 – .5 mm² Mating Tab Width: .071 in Mating Tab Width: 1.8 mm Tab 24 – 20 AWG .2 – .5 mm² .071" | Multilock & Receptacle And Tab | Part Number: 171631-2 | Internal Number: 171631-2 | TE Connectivity RoHS : Compliant |
| 14,116 | ||
| 1-87631-2 | TE Connectivity | 16 MODIV HSG DR MRKD .100 POL Number of Positions: 16 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching Standard Rectangular Connector | 16 Receptacle Housing With | Part Number: 1-87631-2 | Internal Number: 1-87631-2 | Alias Number: 650-1256-01 | TE Connectivity RoHS : Compliant |
| 2,008 | ||
| 1888631-2 | TE Connectivity | Cage Assy SAN Hsink QSFP Thru Bezel Pluggable Form Factor: QSFP+ Pluggable I/O Product Type: Cage Assembly Sealable: No Circuit Application: Signal Operating Temperature Range: -55 – 105 °C QSFP+ Cage Assembly | High Speed I/o | Part Number: 1888631-2 | Internal Number: 1888631-2 | TE Connectivity RoHS : Compliant |
| 489 | ||
| T1660163129-000 | TE Connectivity | H16B-SDRH-LB-PG29 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1660163129-000 | Internal Number: T1660163129-000 | TE Connectivity RoHS : Compliant |
| 48 | ||
| T1730063120-000 | TE Connectivity | H6B-TBF-M20 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1730063120-000 | Internal Number: T1730063120-000 | TE Connectivity RoHS : Compliant |
| 31 | ||
| T1629163125-000 | TE Connectivity | H16A-SDRS-M25 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Base Housing Side | Rectangular Connector Hoods & Base | Part Number: T1629163125-000 | Internal Number: T1629163125-000 | TE Connectivity RoHS : Compliant |
| 26 | ||
| T1610063120-000 | TE Connectivity | H6B-SGR-M20 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1610063120-000 | Internal Number: T1610063120-000 | TE Connectivity RoHS : Compliant |
| 25 | ||
| T1620163125-000 | TE Connectivity | H16B-SDR-LB-M25 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1620163125-000 | Internal Number: T1620163125-000 | TE Connectivity RoHS : Compliant |
| 21 | ||
| T1770063125-000 | TE Connectivity | H6B-TBFH-M25 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1770063125-000 | Internal Number: T1770063125-000 | TE Connectivity RoHS : Compliant |
| 18 | ||
| T1620063121-000 | TE Connectivity | H6B-SDR-PG21 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1620063121-000 | Internal Number: T1620063121-000 | TE Connectivity RoHS : Compliant |
| 15 | ||
| T1620063120-000 | TE Connectivity | H6B-SDR-M20 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1620063120-000 | Internal Number: T1620063120-000 | TE Connectivity RoHS : Compliant |
| 9 | ||
| 963121-1 | TE Connectivity | JUNIOR TIMMER HOUSING 8POS, AS Nominal Voltage Architecture: 12 V Number of Positions: 8 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 2.8 mm Timer Connector Housing | 12 V 8 Housing for Female Terminals Wire-to-Wire | Part Number: 963121-1 | Internal Number: 963121-1 | 2.8 mm | TE Connectivity RoHS : Compliant |
| 5 | ||
| T1250163121-000 | TE Connectivity | H16B-TSBS-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1250163121-000 | Internal Number: T1250163121-000 | TE Connectivity RoHS : Compliant |
| 2 | ||
![]() Teledyne HiRel | 5962-8606312QXA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
5962-8606312QYA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606312XA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606312YA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606312UA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | C2220X7T631-224KNE | VENKEL LTD | HV Chip Capacitor;2220;X7T;630V;0.22uF;10% RoHS : Compliant | 1,000 | ||
| C1206C0G631-2R7CNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;630V;2.7pF;�0.25pF RoHS : Compliant | 0 | |||
| C0805C0G631-271JNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;270pF;�5% RoHS : Compliant | 0 | |||
| C1812X7R631-272KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;630V;2700pF;�10% RoHS : Compliant | 0 | |||
| C1808C0G631-270JNE | VENKEL LTD | HV Chip Capacitor;1808;C0G;630V;27pF;�5% RoHS : Compliant | 0 | |||
| C0805C0G631-270KNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;27pF;�10% RoHS : Compliant | 0 | |||
| C0805C0G631-2R2BNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;2.2pF;�0.1pF RoHS : Compliant | 0 | |||
| C1808X7R631-222KNE | VENKEL LTD | HV Chip Capacitor;1808;X7R;630V;2200pF;�10% RoHS : Compliant | 0 | |||
| C0805C0G631-220GNP | VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;22pF;�2% RoHS : Compliant | 0 | |||
| AGC1206C0G631-221JNP | VENKEL LTD | Auto Grade Capacitor;1206;C0G;630V;220pF;�5% RoHS : Compliant | 0 | |||
| C1808X7R631-221KNE | VENKEL LTD | HV Chip Capacitor;1808;X7R;630V;220pF;�10% RoHS : Compliant | 0 | |||
| C1812X7R631-273KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;630V;0.027uF;�10% RoHS : Compliant | 0 | |||
| AGC1206C0G631-220JNP | VENKEL LTD | Auto Grade Capacitor;1206;C0G;630V;22pF;�5% RoHS : Compliant | 0 | |||
| AGC1206X7R631-272KNE | VENKEL LTD | Auto Grade Capacitor;1206;X7R;630V;2700pF;�10% RoHS : Compliant | 0 | |||
| C1206C0G631-2R2CNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;630V;2.2pF;�0.25pF RoHS : Compliant | 0 | |||
![]() Vyrian | MAX6312UK45D3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.5V, CMOS, PDSO5 RoHS : Compliant | 12,321 | ||
| MAX6312EUK41D4+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.1V, CMOS, PDSO5 RoHS : Compliant | 11,732 | |||
| MAX6312EUK32D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.2V, CMOS, PDSO5 RoHS : Compliant | 11,436 | |||
| MAX6312UK48D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.8V, CMOS, PDSO5 RoHS : Compliant | 10,999 | |||
| MAX6312EUK25D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.5V, CMOS, PDSO5 RoHS : Compliant | 10,537 | |||
| MAX6312EUK33D1+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.3V, CMOS, PDSO5 RoHS : Compliant | 10,314 | |||
| MAX6312UK37D4+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.7V, CMOS, PDSO5 RoHS : Compliant | 8,587 | |||
| MAX6312UK38D3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.8V, CMOS, PDSO5 RoHS : Compliant | 7,385 | |||
| MAX6312UK49D1+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.9V, CMOS, PDSO5 RoHS : Compliant | 6,938 | |||
| MAX6312EUK35D1+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.5V, CMOS, PDSO5 RoHS : Compliant | 6,730 | |||
| MAX6312UK00D4+T | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, CMOS, PDSO5 RoHS : Compliant | 6,568 | |||
| MAX6312UK28D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.8V, CMOS, PDSO5 RoHS : Compliant | 5,505 | |||
| MAX6312EUK50D2+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +5V, CMOS, PDSO5 RoHS : Compliant | 4,957 | |||
| MAX6312EUK42D3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.2V, CMOS, PDSO5 RoHS : Compliant | 4,924 | |||
| RK1631210AWN | Alps Alpine | Potentiometer, 0.1W, 10000ohm, 5V, 20% +/-Tol, 1 Turn(s) | 809 | |||
![]() Waytek, Inc. | 956-3124 | Littelfuse Inc | The Cole Hersee 956-3124 is a heavy-duty 3-position ignition switch designed for reliable engine control in automotive and equipment applications. Featuring OFFIGN/ACCSTART positions with anti-restart protection, it prevents accidental re-engagement of the starter. Rated for 12V (10A ACC/IGN, 5A start), it includes five screw terminals, a lever actuator, and sealed construction with O-ring and gasket for durability in harsh environments. |
| 48 | |
![]() Win Source Electronics | SKY66312-11 | Skyworks Solutions Inc | IC AMP 4G/5G 2.3-2.4GHZ 16MCM RoHS : Compliant |
| 4,438 | |
| MCP16312T-E/MS | Microchip Technology Inc | IC REG BUCK ADJUSTABLE 1A 8MSOP / Buck Switching Regulator IC Positive Adjustable 2V 1 Output 1A 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) RoHS : Compliant |
| 2,400 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |