 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
7130-96LAS-R 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
 NexGen Digital | RC0402FR-07130RL | YAGEO Corporation | RoHS : Compliant | 10,000 | ||
| 2014471300 | Molex | RoHS : Compliant | 2,298 | |||
| RT0402BRD07130KL | YAGEO Corporation | RoHS : Compliant | 500 | |||
IDT7130LA25J | Integrated Device Technology Inc | RoHS : Not Compliant | 50 | |||
 PUI | 12.87130 | 565,083 | ||||
 Avnet Silica | 7130LA20PFG | Renesas Electronics Corporation | (Alt: 7130LA20PFG) RoHS : Compliant | 0 | ||
| 7130SA55TFG | Renesas Electronics Corporation | SRAM ASYNC (Alt: 7130SA55TFG) RoHS : Compliant | 0 | |||
| 7130LA20TFG | Renesas Electronics Corporation | (Alt: 7130LA20TFG) RoHS : Compliant | 0 | |||
| 7130LA25PFGI | Renesas Electronics Corporation | (Alt: 7130LA25PFGI) RoHS : Compliant | 0 | |||
| 7130LA20TFG8 | Renesas Electronics Corporation | (Alt: 7130LA20TFG8) RoHS : Compliant | 0 | |||
| 7130LA25PFGI8 | Renesas Electronics Corporation | (Alt: 7130LA25PFGI8) RoHS : Compliant | 0 | |||
| 5962-8871307RX | Teledyne HiRel | (Alt: 5962-8871307RX) RoHS : Not Compliant | 0 | |||
| IDT7130LA-25JG | Renesas Electronics Corporation | (Alt: IDT7130LA-25JG) RoHS : Compliant | 0 | |||
| IDT7130SA-25JG | Renesas Electronics Corporation | (Alt: IDT7130SA-25JG) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AA.171.301111 | Taoglas Antenna Solutions | MagmaX AA.171 GPS/GLONASS/Galileo/BeiDou Antenna Dual pin patch, 3M RG-174 RoHS : Compliant |
| 0 | |
 ECCO | 10-730187-130 | Amphenol Industrial Operations |
| 490 | ||
| 10-821713-000 | Amphenol Industrial Operations |
| 57 | |||
 Maritex | RC0805JR-07130RL | YAGEO Corporation | Chip Resistor; SMD; 0805; 130R; 5%; 1/8W RoHS : Compliant |
| 799,200 | |
| RC1206JR-07130KL | YAGEO Corporation | Chip Resistor; SMD; 1206; 130K; 5%; 1/4W RoHS : Compliant |
| 54,480 | ||
 Pasternack Enterprises US | PE3M0071-30 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 N Male to SMA Male Right Angle Cable 30 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 N male to SMA male right angle cable 30 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N male to SMA male right angle cable 30 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/01-0503 type N to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/01-0503 N type cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/01-0503 type N to right angle M39012/56-3109 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/01-0503 type N to M39012/56-3109 SMA cable is a male to male coax assembly, PE3M0071-30, can also be known as a MIL-DTL-17/MIL-C-17 M39012/01-0503 N type plug to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/01-0503 type N plug to M39012/56-3109 SMA plug cable assembly PE3M0071-30 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/01-0503 N cable assembly is manufactured with M39012/01-0503 N type to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/01-0503 type N male to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0071-30 can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/01-0503 type N male cable assembly if the opposite connectivity is required. M39012/01-0503 type N plug to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/01-0503 N type to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/01-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N male to SMA male right angle cable 30 inch length using M17/128-RG400 coax. |
| 66 | |
| PE3FCA271-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to LC UPC, OM4 Multimode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Aqua-30M. Pasternack’s PE3FCA271-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 6-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA271-30M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 40 | ||
| PE3FCA371-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber LC UPC to LC UPC, OM5 Multimode Distribution Cable, 5.6mm Riser, 2.0mm breakout, Lime Green-30M. Pasternack’s PE3FCA371-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 8-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our lime green fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM5 fiber that offers cutting-edge Wideband Multimode Fiber (WBMMF) technology, supporting at least four WDM channels at 28 Gbps per channel over the 850-953nm wavelength range and a bandwidth of 28000 MHz·km. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA371-30M fiber optic cable with a 5.6 mm cable diameter and 42 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for indoor high-speed deployments, guarantees reliability and superior signal integrity. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements. |
| 30 | ||
| PE7371-30 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 25 Watt, VSWR Maximum: 1.6:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, N Female to N Female Black Anodized Aluminum Heatsink Body Rated to 25 Watts Up to 18 GHz. PE7371-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a female gender on side 1 and a type N female connector on side 2. The Pasternack PE7371-30 30 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 25 Watts at the stated attenuation value. Our fixed RF attenuator PE7371-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 18 | ||
| PE7471-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Aluminum, Connector-In Series: 3.5mm, Connector-In Gender: Male, Connector-Out Series: 3.5mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, 3.5mm Male to 3.5mm Female Aluminum Body Rated to 2 Watts Up to 26.5 GHz. PE7471-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 3.5mm connectors is constructed with aluminum body material. The attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This 3.5mm attenuator has a male gender on side 1 and a 3.5mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7471-30 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 30 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7471-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7130 | Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 8 GHz, Maximum Frequency: 12 GHz, Impedance: 50 Ohm, Maximum Input Power: 0.5 Watts, Maximum Input VSWR: 1.8:1, Maximum Insertion Loss: 2.6 dB, Minimum Isolation: 70 dB. SMA SP4T PIN Diode Switch Operating From 8 GHz to 12 GHz Up To +27 dBm. PE7130 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Absorptive switch has a minimum frequency of 8 GHz and a maximum frequency of 12 GHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of 100 ns and a maximum input power of 0.5 Watts (+27 dBm ). Insertion loss maximum of this SMA Absorptive switch is 2.6 dB with an isolation minimum of 70 dB. Absorptive PIN diode radio frequency switch PE7130 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 0 | ||
| PE3W07130 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Female Bulkhead Cable Using RG316 Coax. PE3W07130 is a reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable using RG316 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07130 SMA reverse polarity male right angle to SMA reverse polarity female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W17130 | Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. NEX10 Male to 7/16 DIN Male Cable Using TFT-5G-402 Coax. PE3W17130 is a NEX10 male to 7/16 DIN male cable using TFT-5G-402 coax. This Pasternack NEX10 male to 7/16 DIN male cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male NEX10 to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17130 NEX10 male to 7/16 DIN male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3C7130 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE371-300CM | Pasternack Enterprises |
| 0 | |||
 Sager | 767130-7 | TE Connectivity | Board to Board & Mezzanine Connectors MICT RCPT 266 ASY GOLD EXTD RoHS : Not Compliant | 0 | ||
| 0713080186 | Molex | Headers & Wire Housings CGrid SMT Bkwy Hdr 15SAu 86Ckt Tu RoHS : Compliant | 0 | |||
| 0713081284 | Molex | Headers & Wire Housings CGrid SMT Bkwy Hdr 30SAu 84Ck Tub RoHS : Compliant | 0 | |||
| 0713084290 | Molex | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 0713085424 | Molex | Headers & Wire Housings CGrid SMT Bkwy Hdr Tin 24Ckt Tube RoHS : Compliant | 0 | |||
| 0713085550 | Molex | Headers & Wire Housings CGrid SMT Bkwy Hdr Tin 50Ckt TR | 0 | |||
| 0713085668 | Molex | Headers & Wire Housings CGrid SMT Bkwy Hdr Tin 68Ckt TubewVC | 0 | |||
| 0713086108 | Molex | Headers & Wire Housings CGrid SMT Hdr wSPeg Tin 8Ckt | 0 | |||
| 0713086810 | Molex | Headers & Wire Housings CGrid SMT Hdr wSPeg Tin 10Ckt TR | 0 | |||
| 0713088016 | Molex | Headers & Wire Housings CGrid SMT Bkwy Hdr Tin 16Ckt Tube 320 | 0 | |||
| CX5713-000 | TE Connectivity | Circular MIL Spec Backshells SLC40AC-1610A RoHS : Compliant | 0 | |||
| IULK1-1REC4-71302-4 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr,HydMag |
| 0 | ||
| AP7-33771-30 | Sensata Circuit Breakers | Circuit Breakers CIRCUIT BREAKER |
| 0 | ||
| 9752117130 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9755617130 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
 Teledyne HiRel | 5962-8871303RA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | ||
| 5962-8871303XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871306RA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871302XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871307SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871302RA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871307RA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871306XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871302SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871303SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871307XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871306SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
 Vyrian | 7130BL001 | Alpha Wire | Wire And Cable, 1 Conductor(s), 24AWG, 300V, Flexible Cord And Fixture Wire RoHS : Compliant | 15,059 | ||
| AD97130004D | Analog Devices Inc | 12,072 | ||||
| MAX17130EVKIT | Analog Devices (Maxim Integrated) | 10,907 | ||||
| LTC7130EY#PBF | Analog Devices Inc | Switching Regulator, Current-mode, CMOS, PBGA63 RoHS : Compliant | 9,811 | |||
| TMDSDSK6713-0E | Texas Instruments | 5,494 | ||||
5962-8971303MNX | AMD Xilinx | Field Programmable Gate Array, CMOS, CQFP100 | 3,929 | |||
| 5962-8971302MYX | AMD Xilinx | Field Programmable Gate Array, CMOS, CQFP100 | 3,747 | |||
| 5962-8971303MYX | AMD Xilinx | Field Programmable Gate Array, CMOS, CQFP100 | 3,448 | |||
| MCP87130T-U/MF | Microchip Technology Inc | Power Field-Effect Transistor, 43A I(D), 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 3,075 | |||
| 5962-8971302MYC | AMD Xilinx | Field Programmable Gate Array, CMOS, CQFP100 | 3,004 | |||
5962-8971301MXC | AMD Xilinx | Field Programmable Gate Array, 144 CLBs, 4200 Gates, 50MHz, 144-Cell, CMOS, CPGA84 | 2,914 | |||
| 5962-8971301XX | AMD Xilinx | 2,709 | ||||
| 5962-8971302MMC | AMD Xilinx | Field Programmable Gate Array, 70MHz, 144-Cell, CMOS, CQFP100 | 1,780 | |||
| 5962-8971303MNC | AMD Xilinx | Field Programmable Gate Array, 4200 Gates, 100MHz, 144-Cell, CMOS, CQFP100 | 1,595 | |||
IDT7130LA25TFI8 | Integrated Device Technology Inc | Multi-Port SRAM, 1KX8, 25ns, CMOS, PQFP64 RoHS : Not Compliant | 590 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼ 
English
Chinese
German
Japanese
Russian
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand