| 전자부품 데이터시트 검색엔진 |
|
8123-AB3-D-R 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | NCP81231MNTXG | onsemi | Buck Controller,USB Power & Type-C Apply RoHS : Compliant | 5,100 | ||
![]() ComSIT USA | 13181231 | TYCO/TE CONNECTIVITY | AVAILABLE EU | 22 | ||
| 13181232 | TYCO/TE CONNECTIVITY | AVAILABLE EU | 17 | |||
| 18123D106KAT2A | AVX/KYOCERA AVX COMPONENTS CORPORATION | AVAILABLE EU | 395 | |||
![]() GLYN GmbH & Co. KG | R_GENESYSM-MTH6 _28123 | AAEON Technology Inc | Intel© Coreÿâ„¢ Ultra 7 Processor 155H DDR5 16GB 560 | 1 | ||
![]() Flip Electronics | NCP81230HMNTWG | onsemi | Stock, Ship Today RoHS : Compliant | 15,630 | ||
| NCP81239MNTXG | onsemi | Stock, Ship Today RoHS : Compliant | 5,000 | |||
![]() Maritex | 1318123-1 | TE Connectivity | Rectangular Connector Housings; 1318123-1; TE CONNECTIVITY; 1; 3; 3; Yes RoHS : Compliant |
| 1,482 | |
| NCP81239MNTXG | onsemi | DC DC Converters; NCP81239MNTXG; ON SEMICONDUCTOR; Buck-Boost; 1 mm; 1 RoHS : Compliant |
| 227 | ||
| RNP18-PK0812-331K | RDA Microelectronics | Inductor: wire; THT; 3300uH; 1.4A; 0.5163R; 9.5x13.5mm; 10% |
| 100 | ||
![]() Pasternack Enterprises US | PE3W20812-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-P086HF Coax, 26.5 GHz., Pasternack’s PE3W20812-36 SMA male to SMA male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W20812-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W20812-36 RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W20812-36 SMA plug to SMA plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 92 | |
| PE3W12812-3 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 3 inches. 1.85mm Male to SMP Female Cable 3 Inch Length Using PE-047SR Coax., Radio frequency assembly 1.85mm male to SMP female cable 3 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SMP female cable 3 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a SMP cable connection on the other. Our 1.85mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W12812-3 can also be known as a 1.85mm plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. Our 1.85mm male to SMP female cable has a maximum VSWR of 1.4:1. 1.85mm plug to SMP jack cable assembly PE3W12812-3 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W12812-3 can also be used in the other direction and will be a SMP female to 1.85mm male cable assembly if the opposite connectivity is required. 1.85mm plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SMP cable assembly for quick shipment worldwide. Variations of 1.85mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SMP RF cable assembly as per your requirements. |
| 58 | ||
| PE3C9812-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to N Female Bulkhead Low Loss Cable 36 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly N male right angle to N female bulkhead low loss cable 36 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N female bulkhead low loss cable 36 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and N type bulkhead cable connection on the other. Our low loss right angle type N to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C9812-36 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C9812-36 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N right angle male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9812-36 can also be used in the other direction and will be N type female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low loss cable 36 inch length using TCOM-240 coax with Times Microwave components. |
| 45 | ||
| PE3C8123 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W08123 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to SC Male Cable Using LMR-195 Coax. PE3W08123 is a N male to SC male cable using LMR-195 coax. This Pasternack N male to SC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SC for connector 2. Our male N to male SC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08123 N male to SC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE38123 | Pasternack Enterprises | 0 | ||||
| PE3W06812-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to SMA Male Right Angle Cable 36 Inch Length Using RG174 Coax., Radio frequency assembly BNC male to SMA male right angle cable 36 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to SMA male right angle cable 36 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle SMA cable connection on the other. Our BNC to right angle SMA cable assembly has male gender on end 1 and male on end 2. PE3W06812-36 can also be known as a BNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. BNC plug to SMA plug cable assembly PE3W06812-36 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has solder/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W06812-36 RF cable are available on our downloadable PDF datasheet.PE3W06812-36 can also be used in the other direction and will be right angle SMA male to BNC male cable assembly if the opposite connectivity is required. BNC plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W18123 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SSMA Male to SSMB Jack Cable Using RG178 Coax. PE3W18123 is a SSMA male to SSMB jack cable using RG178 coax. This Pasternack SSMA male to SSMB jack cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SSMB for connector 2. Our male SSMA to jack SSMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18123 SSMA male to SSMB jack cable assembly is constructed with RG178 coax. | 0 | |||
![]() TE Connectivity | 2298123-1 | TE Connectivity | MATE-AX, Pin outer contact, RTK 031 Terminal Type: Pin Wire Size: 22 AWG Wire Size: .35 mm² Interface Plating: Tin (Sn) Primary Locking Feature: On the Terminal Pin 22 AWG .35 mm² Tin (Sn) | Automotive Terminal | Part Number: 2298123-1 | Internal Number: 2298123-1 | TE Connectivity RoHS : Compliant |
| 7,243 | |
| 282812-3 | TE Connectivity | TERMI-BLOK HEADER,ASSY 3P. 5 Number of Positions: 3 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 3 Header Wire-to-Board .197" | Part Number: 282812-3 | Internal Number: 282812-3 | .197" | TE Connectivity RoHS : Compliant |
| 2,955 | ||
| 3-644812-3 | TE Connectivity | 03P MTA156 PSTD CONN 18AWG LF Number of Positions: 3 Connector & Housing Type: Plug Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 3 Plug Connector Assembly With | Part Number: 3-644812-3 | Internal Number: 3-644812-3 | TE Connectivity RoHS : Compliant |
| 1,909 | ||
| 1318123-2 | TE Connectivity | DYNAMIC D2100 HDR V ASSY 3P Y PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | Header Assembly: Wire-To-Board & 5A & Gold Plated | Part Number: 1318123-2 | Internal Number: 1318123-2 | TE Connectivity RoHS : Compliant |
| 1,830 | ||
![]() Waytek, Inc. | 55812301 | Southwire Company LLC | 14/4 SJOOW Service Cord Blk Wht Grn Rd Conductors -40C to 90C UL/CSA 300V |
| 3,000 | |
![]() Win Source Electronics | NCP81239MNTXG | onsemi | IC REG CTRLR BCK/BOOST I2C 32QFN / USB Power Delivery 4-Switch Buck Boost Controller RoHS : Compliant |
| 30,000 | |
AD8123ACPZ-RL![]() | Analog Devices Inc | IC TRANSCEIVER 0/3 40LFCSPWQ RoHS : Compliant |
| 2,000 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |