 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
MP1103-1-RX 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
 STMicroelectronics | KITOPAMP1120 | STMicroelectronics | High-performance Op Amps Sample kit |
| 6 | |
 Ameya Holding Limited | TMP112AIDRLR | Texas Instruments | RoHS : Compliant | 18,461 | ||
| EMP11T2R | ROHM Semiconductor | Switching Diodes RoHS : Compliant |
| 8,000 | ||
| TMP112AIDRLT | Texas Instruments | RoHS : Compliant | 5,000 | |||
| UMP11NFHTN | ROHM Semiconductor | Switching Diodes (支持 AEC-Q101) RoHS : Compliant |
| 3,000 | ||
| UMP11NTN | ROHM Semiconductor | Switching Diodes RoHS : Compliant |
| 3,000 | ||
| TMP112NAIDRLR | Texas Instruments | RoHS : Compliant | 1,704 | |||
TMP117AIYBGT | Texas Instruments | RoHS : Compliant | 1,406 | |||
| NSDEMP11XV6T1G | onsemi | NSDEMP Series 80 V 300 mA 4 ns Common Anode Quad Array Switching Diode-SOT-563 RoHS : Compliant | 1,087 | |||
| TMP112BIDRLR | Texas Instruments | 温度传感器 RoHS : Compliant | 480 | |||
| TMP117AIDRVT | Texas Instruments | RoHS : Compliant | 241 | |||
| IMP11T110 | ROHM Semiconductor | RoHS : Compliant |
| 95 | ||
| TMP117NAIDRVT | Texas Instruments | RoHS : Compliant | 17 | |||
 ComSIT USA | TMP112AIDRLR | Texas Instruments | AVAILABLE EU RoHS : Compliant | 2,852 | ||
ComSIT USA | TPSMP11AHM3AH | Vishay Intertechnologies | Trans Voltage Suppressor Diode, 300W, 9.4V V(RWM), Unidirectional, 1 Element, Silicon, DO-220AA RoHS : Compliant | 12,000 | ||
TMP116AIDRVT | Texas Instruments | HIGH-ACCURACY, LOW-POWER, DIGITAL TEMPERATURE SENSOR Serial Switch/Digital Sensor, 16 Bit(s), 0.40Cel, Square, Surface Mount RoHS : Compliant | 250 | |||
| TMP117MAIDRVR | Texas Instruments | HIGH-ACCURACY, LOW-POWER, DIGITAL TEMPERATURE SENSOR Serial Switch/Digital Sensor, 16 Bit(s), 0.1Cel, Square, Surface Mount RoHS : Compliant | 150 | |||
SMP11EY | Analog Devices Inc | LOW DROP RATE\\ACCURATE SAMPLE AND HOLD AMPLIFIER Sample and Hold Circuit, 1 Func, Sample, 5us Acquisition Time, BIPolar, CDIP14 RoHS : Not Compliant | 20 | |||
| IMP11E01E01N01N01N01N01W000A | Emerson Embedded Power | Switching Power Supply Module, 11 W, 5 V output, enclosed, for industrial and embedded power applications RoHS : Not Compliant | 1 | |||
 NexGen Digital | TMP117AIYBGR | Texas Instruments | RoHS : Compliant | 100 | ||
 PEI Genesis | DAMP11W1SJA197 | ITT Interconnect Solutions |
| 0 | ||
| DAMP11W1PJK127 | ITT Interconnect Solutions |
| 0 | |||
| DAMMP11X1SP | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| DAMMP11X1PJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| HSM-P11/2X5 | Sure Seal Connections |
| 0 | |||
| DAMMP11W1PP | ITT Interconnect Solutions |
| 0 | |||
| DAMP11W1PJK87 | ITT Interconnect Solutions |
| 0 | |||
| DAMP11X1SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DAMMP11X1PP | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| DAMP11X1PJK127 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DAMP11W1SA197 | ITT Interconnect Solutions |
| 0 | |||
| DAMMP11X1SJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| DAMP11X1SVA197 | ITT Interconnect Solutions |
| 0 | |||
 Powell Electronics | CBI-RJTEMP111 | Altech Corporation | Temperature Probe, 1meter, DC-UPS |
| 1 | |
 Chip 1 Exchange | TMP117MAIYBGR | Texas Instruments | INSTOCK RoHS : Compliant | 434 | ||
| AMP1116202-1 | TE Connectivity | INSTOCK | 29 | |||
 Avnet Abacus | MP110 | CTS Corporation | Crystal 11MHz 18pF 2Pin HC49U Bulk (Alt: MP110) RoHS : Compliant | 0 | ||
| MP111C | CTS Corporation | (Alt: MP111C) RoHS : Compliant | 0 | |||
| MP110A | CTS Corporation | (Alt: MP110A) RoHS : Compliant | 0 | |||
| MP110B | CTS Corporation | (Alt: MP110B) RoHS : Compliant | 0 | |||
| MP111A | CTS Corporation | (Alt: MP111A) RoHS : Compliant | 0 | |||
| MP111B | CTS Corporation | (Alt: MP111B) RoHS : Compliant | 0 | |||
| TMP 1-1 | knitter-switch | KNITMP 11 (Alt: TMP 1-1) RoHS : Compliant | 0 | |||
| MP11K50 | VPG Foil Resistors | (Alt: MP11K50) RoHS : Compliant | 0 | |||
| MP111A-E | CTS Corporation | (Alt: MP111A-E) RoHS : Compliant | 0 | |||
| MP11K42L | VPG Foil Resistors | (Alt: MP11K42L) RoHS : Compliant | 0 | |||
| MP111B-E | CTS Corporation | (Alt: MP111B-E) RoHS : Compliant | 0 | |||
| MP111C-E | CTS Corporation | (Alt: MP111C-E) RoHS : Compliant | 0 | |||
| MP110B-E | CTS Corporation | (Alt: MP110B-E) RoHS : Compliant | 0 | |||
APAMP-115 | Abracon Corporation | (Alt: APAMP-115) RoHS : Compliant | 0 | |||
APAMP-112 | Abracon Corporation | (Alt: APAMP-112) RoHS : Compliant | 0 | |||
 Avnet Asia | DMP1100UCB4-7 | Diodes Incorporated | (Alt: DMP1100UCB4-7) RoHS : Compliant |
| 15,000 | |
| NSDEMP11XV6T1G | onsemi | 80 V Common Anode Switching Diode, quad, two duals. (Alt: NSDEMP11XV6T1G) RoHS : Compliant | 0 | |||
| TLMP1100-GS15 | Vishay Intertechnologies | LED Single Chip Pure Green 561nm 30mA 2-Pin SMD T/R (Alt: TLMP1100-GS15) RoHS : Compliant | 0 | |||
| UMP11NTN | ROHM Semiconductor | (Alt: UMP11NTN) RoHS : Compliant | 0 | |||
 Avnet Silica | NSDEMP11XV6T1G | onsemi | 80 V Common Anode Switching Diode quad two duals ONSSPCDDEYG8V5J (Alt: NSDEMP11XV6T1G) RoHS : Compliant | 852,000 | ||
| IMP11T110 | ROHM Semiconductor | Diode Switching 80V 03A 6Pin SMD TR (Alt: IMP11T110) RoHS : Compliant | 0 | |||
| EMP11FHT2R | ROHM Semiconductor | HyperFast Recovery Rectifier 100mA 6Pin SOT563 Emboss TR (Alt: EMP11FHT2R) RoHS : Compliant | 0 | |||
| MP111DS-LF-Z | Monolithic Power Systems | (Alt: MP111DS-LF-Z) RoHS : Compliant | 0 | |||
| DMP1100UCB4-7 | Diodes Incorporated | (Alt: DMP1100UCB4-7) RoHS : Compliant | 0 | |||
| NSDEMP11XV6T5G | onsemi | 80 V Common Anode Switching Diode quad two duals ONSSPCDDEYG8V5J (Alt: NSDEMP11XV6T5G) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | APAMP-111 | Abracon Corporation | I type GPS antenna module (Adhesive Base) RoHS : Compliant |
| 0 | |
APAMP-116 | Abracon Corporation | X type GPS antenna module (Adhesive Base) RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | TMP112NAIDRLT | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,581 | |
| MP-1-10.6168MHZ | MtronPTI | IN STOCK SHIP TODAY | 900 | |||
| MP-1-10.0000 | MtronPTI | IN STOCK SHIP TODAY | 505 | |||
| MP-1-19.6608MHZ | MtronPTI | IN STOCK SHIP TODAY | 385 | |||
| SMP-11103 | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY | 100 | |||
| MP-1-1.8432MHZ | MtronPTI | IN STOCK SHIP TODAY | 90 | |||
| MP-1-18.4320MHZ | MtronPTI | IN STOCK SHIP TODAY | 66 | |||
| MP-1-14.31818MHZ | MtronPTI | IN STOCK SHIP TODAY |
| 56 | ||
| MP-1-14.3181 | MtronPTI | IN STOCK SHIP TODAY | 50 | |||
| MP111 | CTS Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 41 | ||
| MP-1156-10-DP-1E | MP | IN STOCK SHIP TODAY | 40 | |||
| MP-1-16.0000 | MtronPTI | IN STOCK SHIP TODAY | 10 | |||
| 5MP-11483K | EC | IN STOCK SHIP TODAY | 1 | |||
| MP-1156-06-0P-2 | IN STOCK SHIP TODAY | 1 | ||||
 DB Roberts | 22MP11815W | Essentra Components | SNAP BUSHING, 1.187 HOLE, .937 | 0 | ||
| 22MP11815 | Essentra Components | SNAP BUSHING, 1.187 HOLE, .937 | 0 | |||
| 62MP1187 | Essentra Components | 0 | ||||
| 62MP1187N | Essentra Components | HOLE PLUG, SNAP IN , 1.187 IN | 0 | |||
| 62MP1187W | Essentra Components | HOLE PLUG, SNAP IN , 1.187 IN | 0 | |||
 EBV Elektronik | SMP11A-M3/84A | Vishay Intertechnologies | 400W11V 5UNIDIRSMP TVS (Alt: SMP11A-M3/84A) RoHS : Compliant | 0 | ||
| TLMP1100-GS15 | Vishay Intertechnologies | LED Single Chip Pure Green 561nm 30mA 2Pin SMD TR (Alt: TLMP1100-GS15) RoHS : Compliant | 0 | |||
| AS20-M42M-P11 | Broadcom Limited | (Alt: AS20-M42M-P11) RoHS : Compliant | 0 | |||
| SMP11A-M3/85A | Vishay Intertechnologies | 400W11V 5UNIDIRSMP TVS (Alt: SMP11A-M3/85A) RoHS : Compliant | 0 | |||
| NSDEMP11XV6T1G | onsemi | 80 V Common Anode Switching Diode quad two duals ONSSPCDDEYG8V5J (Alt: NSDEMP11XV6T1G) RoHS : Compliant | 0 | |||
| MSMP11A-M3/89A | Vishay Intertechnologies | (Alt: MSMP11A-M3/89A) RoHS : Compliant | 0 | |||
 Flip Electronics | NSDEMP11XV6T5G | onsemi | Stock, Ship Today RoHS : Compliant |
| 32,000 | |
 Master Electronics | KUMP-11D18-12 | TE Connectivity | Power Relay 12VDC 15A DPDT(38.89x35.71x54.74)mm Socket RoHS : Compliant |
| 642 | |
| MP1-11R | ABB Low Voltage Products and Systems | ABB-PILOT DEVICES - 22MM MODULAR - ILLUM PUSHBUTTO RoHS : Compliant |
| 90 | ||
| KUMP-11A18-240 | TE Connectivity | Electromechanical Relay 240VAC 7.2KOhm 15A DPDT(38.89x35.71x55.55)mm Plain Case Industrial Relay RoHS : Compliant |
| 76 | ||
| MP1-10L | ABB Low Voltage Products and Systems | ABB-PILOT DEVICES - 22MM MODULAR - PUSHBUTTONS RoHS : Compliant |
| 30 | ||
| MP1-10G | ABB Low Voltage Products and Systems | ABB-PILOT DEVICES - 22MM MODULAR - PUSHBUTTONS RoHS : Not Compliant |
| 8 | ||
| DMP112025 | Acme Electric Corporation | DMP112025 - Acme Electric Din Rail and Linear Power Supplies Single Phase-Plastic RoHS : Compliant |
| 2 | ||
| UC-PMP-(110X38) | Phoenix Contact | Insert labels - matt - white - unmarked - can be marked with: BLUEMARK CLED - mounting type: snapped into marker carriers - lettering field size: 110 x 38 mm RoHS : Compliant |
| 0 | ||
| DAMP-11C1S-J-K126 | ITT Interconnect Solutions | Conn Combo D-Subminiature SKT 1Coaxial/10Signal POS Solder RA Thru-Hole 11 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| DAMP-11H1S-J-K126 | ITT Interconnect Solutions | Connector hybrid D-Shell pcb Mount plug 10+1 Contacts skt r Angle Pc Tail Terminal #4-40 RoHS : Compliant |
| 0 | ||
| DAMP-11H1S-J-A197 | ITT Interconnect Solutions | Conn Combo D-Subminiature SKT 1Power/10Signal POS Solder RA Thru-Hole 11 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| DAMP-11X1P-J-K127 | ITT Interconnect Solutions | DAMP-11X1P-J-K127; D Sub; D Sub RoHS : Compliant |
| 0 | ||
| KUMP-11AT8-120 | TE Connectivity | Electromechanical Relay 120VAC 1.7KOhm 15A DPDT(50.52x38.56x57.1)mm Flange Industrial Relay RoHS : Compliant |
| 0 | ||
| DAMP-11H1P-J-K127 | ITT Interconnect Solutions | Connector hybrid D-Shell pcb Mount recept 10+1 Contacts skt r Angle Pc Tail Terminal #4-40 RoHS : Compliant |
| 0 | ||
| DAMP-11X1S-J-A197 | ITT Interconnect Solutions | Conn Combo D-Subminiature SKT 1Power/10Signal POS Solder RA Thru-Hole 11 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| KUMP-11DT8-24 | TE Connectivity | Electromechanical Relay 24VDC 472Ohm 15A DPDT(50.52x38.56x57.1)mm Flange Industrial Relay RoHS : Compliant |
| 0 | ||
 Neutron USA | MP1-11R | ABB Low Voltage Products and Systems | Switch Actuators PB MOM RED FLUSH ILL |
| 50 | |
| MP1-11G | ABB Low Voltage Products and Systems | Switch Actuators PB MOM GRN FLUSH ILL |
| 50 | ||
| KUMP-11A18-120 | TE Connectivity | Relay; E-Mech; DPDT; 15A; Ctrl-V 120AC; Vol-Rtg 277AC; 8 Pin; KUMP-11A18-120 RoHS : Compliant |
| 50 | ||
| KUMP-11A18-24 | TE Connectivity | Industrial Relays DP PLN QC/SLDR 24VAC RoHS : Compliant |
| 50 | ||
| MP1-11W | ABB Low Voltage Products and Systems | Modular Series White Push Button Head Momentary 22mm Cutout |
| 50 | ||
| MP1-10CC81 | ABB Low Voltage Products and Systems | Modular Series Clear Push Button Head, Momentary 22mm Cutout |
| 0 | ||
| MP1-11Y | ABB Low Voltage Products and Systems | MOM FLUSH YEL BP ILL |
| 0 | ||
| MP1-10G | ABB Low Voltage Products and Systems | Modular Series Green Push Button Head Momentary 22mm Cutout |
| 0 | ||
| KUMP-11D18-110 | TE Connectivity | Relay; E-Mech; DPDT; Cur-Rtg 15A; Ctrl-V 110DC; Vol-Rtg 277AC; 9 Pin; KUMP RoHS : Compliant |
| 0 | ||
| MP1-10R | ABB Low Voltage Products and Systems | Switch part; Pushbtn operator; Flush; Red; 22mm; Mom; fits MP1 series |
| 0 | ||
| KUMP-11D18-24 | TE Connectivity | Relay; E-Mech; DPDT; 15A; Ctrl-V 24DC; Vol-Rtg 277AC; 9 Pin; KUMP-11D18-24 RoHS : Compliant |
| 0 | ||
| MP1-10CC7 | ABB Low Voltage Products and Systems | Modular Series, Clear Push Button Head, Momentary, 22mm Cutout |
| 0 | ||
| MP1-10B | ABB Low Voltage Products and Systems | Switch part; Pushbtn operator; Flush; Black; 22mm; Mom; fits MP1 series |
| 0 | ||
 Pasternack Enterprises US | PE70MP1105 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1105 from Pasternack has type N connector in and is 50 Ohm, type N connector out and is 75 Ohm. This coaxial type N to type N impedance matching pad has a female type N in and a female N type out. Our 50 Ohm type N to 75 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type N matching pad is brass. 50 Ohm type N female to 75 Ohm type N female RF impedance pad PE70MP1105 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with N type to N type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 11 | |
| PE70MP1102 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 75 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 50 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 75 Ohm N Male to 50 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1102 from Pasternack has type N connector in and is 75 Ohm, type N connector out and is 50 Ohm. This coaxial N type to N type impedance matching pad has a male type N in and a female type N out. Our 75 Ohm type N to 50 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 75 Ohm type N male to 50 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 75 Ohm type N to 50 Ohm type N matching pad is brass. 75 Ohm N type male to 50 Ohm N type female RF impedance pad PE70MP1102 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type N connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 11 | ||
| PE70MP1109 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1109 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to type F impedance matching pad has a female SMA in and a female type F out. Our 50 Ohm SMA to 75 Ohm F type impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA female to 75 Ohm F type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA female to 75 Ohm type F female RF impedance pad PE70MP1109 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 9 | ||
| PE70MP1103 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Male to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1103 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial type N to type F impedance matching pad has a male type N in and a female type F out. Our 50 Ohm N type to 75 Ohm F type impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N male to 75 Ohm F type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type F matching pad is brass. 50 Ohm N type male to 75 Ohm type F female RF impedance pad PE70MP1103 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 7 | ||
| PE70MP1107 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1107 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to F type impedance matching pad has a male SMA in and a male type F out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA male to 75 Ohm F type male RF impedance pad PE70MP1107 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1108 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1108 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to type F impedance matching pad has a male SMA in and a female F type out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm F type matching pad is brass. 50 Ohm SMA male to 75 Ohm type F female RF impedance pad PE70MP1108 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1110 | Pasternack Enterprises | Key Specifications, Connector In Series: TNC, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm TNC Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1110 from Pasternack has TNC connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial TNC to type F impedance matching pad has a female TNC in and a female F type out. Our 50 Ohm TNC to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm TNC female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm TNC to 75 Ohm type F matching pad is brass. 50 Ohm TNC female to 75 Ohm F type female RF impedance pad PE70MP1110 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with TNC to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1111 | Pasternack Enterprises | Key Specifications, Connector In Series: TNC, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm TNC Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1111 from Pasternack has TNC connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial TNC to F type impedance matching pad has a female TNC in and a male type F out. Our 50 Ohm TNC to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm TNC female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm TNC to 75 Ohm F type matching pad is brass. 50 Ohm TNC female to 75 Ohm type F male RF impedance pad PE70MP1111 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with TNC to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1112 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 75 Ohm, Connector Out Series: BNC, Connector Out Gender: Male, Connector Out Impedence: 50 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 75 Ohm BNC Male to 50 Ohm BNC Male Matching Pad Operating from DC to 3 GHz. Pasternack’s PE70MP1112 RF impedance matching pad (also known as coaxial matching pad) has a 75 Ohm BNC male connector in and a 50 Ohm BNC male connector out. This coaxial matching pad can operate at frequencies ranging from DC to 3 GHz. Our BNC to BNC RF matching pad has brass body material with tri-metal over copper body plating. This impedance matching pad is stocked to be readily available for same-business-day shipment. The impedance matching pad is used to match the different impedances between two devices, maximizing power transfer between the two impedances. This radio frequency BNC male to BNC male matching pad has a typical attenuation of 4 dB. The PE70MP1112 impedance matching pad from Pasternack is suitable for CATV/cable networks, test and measurement, communication systems and wireless systems. This RF matching pad offers a maximum VSWR of 1.25:1. Pasternack’s BNC to BNC RF matching pad has a maximum input power rating (CW) of 0.5 Watts. This impedance matching pad is designed to withstand temperatures ranging from -30 to 70 degrees C. Our matching pad has a length of 2.02 inches, a width of 0.57 inches, and a weight of 0.03 lbs. Additional dimensions and specifications for this RF impedance matching pad are on our downloadable PDF datasheet above. This 75 Ohm to 50 Ohm matching pad is just part of over one million RF microwave and millimeter wave components supplied by Pasternack. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal BNC male to BNC male RF impedance matching pad for your requirements. |
| 4 | ||
| PE70MP1106 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1106 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial N type to type F impedance matching pad has a female type N in and a female F type out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm type F matching pad is brass. 50 Ohm type N female to 75 Ohm F type female RF impedance pad PE70MP1106 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PE70MP1101 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Male to 75 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1101 from Pasternack has type N connector in and is 50 Ohm, type N connector out and is 75 Ohm. This coaxial type N to type N impedance matching pad has a male N type in and a female type N out. Our 50 Ohm type N to 75 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N male to 75 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm N type matching pad is brass. 50 Ohm type N male to 75 Ohm type N female RF impedance pad PE70MP1101 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type N connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 1 | ||
| PE70MP1100 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: BNC, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm BNC Male to 75 Ohm BNC Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1100 from Pasternack has BNC connector in and is 50 Ohm, BNC connector out and is 75 Ohm. This coaxial BNC to BNC impedance matching pad has a male BNC in and a female BNC out. Our 50 Ohm BNC to 75 Ohm BNC impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm BNC male to 75 Ohm BNC female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm BNC to 75 Ohm BNC matching pad is brass. 50 Ohm BNC male to 75 Ohm BNC female RF impedance pad PE70MP1100 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with BNC to BNC connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 0 | ||
| PE70MP1104 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1104 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial type N to F type impedance matching pad has a female N type in and a male type F out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type F matching pad is brass. 50 Ohm N type female to 75 Ohm F type male RF impedance pad PE70MP1104 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 0 | ||
 Vyrian | TMP117AIYBGT | Texas Instruments | Serial Switch/Digital Sensor, 16 Bit(s), 0.1Cel, Rectangular, Surface Mount RoHS : Compliant | 29,500 | ||
| TMP117MAIYBGR | Texas Instruments | Serial Switch/Digital Sensor, 16 Bit(s), 0.1Cel, Rectangular, Surface Mount RoHS : Compliant | 28,850 | |||
| PMP11216 | Texas Instruments | 28,000 | ||||
| PMP11140 | Texas Instruments | 11,950 | ||||
| PMP1129 | Texas Instruments | 6,200 | ||||
| PMP11052 | Texas Instruments | 2,400 | ||||
| MAX6502CMP115-T | Analog Devices Inc | Analog Circuit, 1 Func, PSFM7 RoHS : Not Compliant | 1,750 | |||
| TMP112AIDRLT | Texas Instruments | Serial Switch/Digital Sensor, 12 Bit(s), 1Cel, Rectangular, 6 Pin, Surface Mount RoHS : Compliant | 1,400 | |||
| TMP112EVM | Texas Instruments | 1,250 | ||||
| TMP114AIYMTT | Texas Instruments | Serial Switch/Digital Sensor, 16 Bit(s), 0.3Cel, Square, 4 Pin, Surface Mount RoHS : Compliant | 1,050 | |||
| TMP114EVM | Texas Instruments | 400 | ||||
| MAX6504CMP115 | Analog Devices Inc | 270 | ||||
| HLMP-1120 | Broadcom Limited | Single Color LED, Red, T-1, 2.925mm RoHS : Compliant | 170 | |||
| TMP116METER-EVM | Texas Instruments | 21 | ||||
| TMP116EVM | Texas Instruments | 13 | ||||
 Win Source Electronics | DMP1100UCB4-7 | Diodes Incorporated | MOSFET P-CHA 12V 2.5A WLB0808 / Qualified to AEC-Q101 Standards for High Reliability RoHS : Compliant |
| 990,000 | |
| TMP116NAIDRV | Texas Instruments | Digital Temperature Sensor 16-bit 1.9V to 5.5V WSON-6 |
| 83,418 | ||
| TMP116NAIDRVR | Texas Instruments | SENSOR DIGITAL -55C-125C 6WSON RoHS : Compliant |
| 77,480 | ||
| TMP117MAIDRVT | Texas Instruments | SENSOR TEMP RoHS : Compliant |
| 74,470 | ||
| TMP117MAIDRVR | Texas Instruments | TEMPERATURE SENSOR RoHS : Compliant |
| 74,048 | ||
TMP112AQDRLRQ1 | Texas Instruments | TMP112-Q1 Automotive Grade High-Accuracy, Low-Power, Digital Temperature Sensor in SOT563 | SENSOR DIGITAL -40C-125C 6SOT RoHS : Compliant |
| 63,363 | ||
| TMP117MAIYBG | Texas Instruments | Digital Temperature Sensor 16-bit 1.8V to 5.5V DSBGA-6 |
| 40,000 | ||
| TMP117MAIYBGT | Texas Instruments | TEMP SENSOR RoHS : Compliant |
| 38,150 | ||
| TMP116AIDRV | Texas Instruments | Digital Temperature Sensor 16-bit 1.9V to 5.5V WSON-6 |
| 27,000 | ||
| TMP117AIYBG | Texas Instruments | Digital Temperature Sensor 16-bit 1.8V to 5.5V DSBGA-6 |
| 20,000 | ||
| TMP117AIYBGT | Texas Instruments | TEMP SENSOR / Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-DSBGA (1.49x0.95) RoHS : Compliant |
| 18,560 | ||
| TMP117AIYBGR | Texas Instruments | TEMP SENSOR / Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-DSBGA (1.49x0.95) RoHS : Compliant |
| 18,520 | ||
| TMP112NAIDRL | Texas Instruments | Digital Temperature Sensor 12-bit 1.4V to 3.6V SOT-563 |
| 13,130 | ||
| TMP117NAIYBGR | Texas Instruments | TEMP SENSOR / Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-DSBGA (1.49x0.95) RoHS : Compliant |
| 7,960 | ||
| TLMP1100-GS08 | Vishay Huntington | LED GREEN 0603 SMD / Standard 0603 SMD LED |
| 100 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼ 
English
Chinese
German
Japanese
Russian
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand