| 전자부품 데이터시트 검색엔진 |
|
S236HG-S08-R 판매업체 |
| 판매업체 | 부품명 | 제조업체 | 상세설명 | Price | Qty. BuyNow | |
![]() Avnet Americas | MTSW-105-09-G-S-236 | Samtec Inc | - Bulk (Alt: MTSW-105-09-G-S-236) RoHS : Compliant |
| 0 | |
| TW-26-09-G-S-236-100 | Samtec Inc | Board Stackers & Spacers, Pin Header, 5.99 mm, 26 Contacts, Solder, 1 Rows, 2 mm, TW Series - Bulk (Alt: TW-26-09-G-S-236-100) RoHS : Compliant |
| 0 | ||
| MTLW-105-07-L-S-236 | Samtec Inc | Pin Header, Board-to-Board, 1 Rows, 5 Contacts, Through Hole, MTLW Series, Unshrouded, Straight - Bulk (Alt: MTLW-105-07-L-S-236) RoHS : Compliant | 0 | |||
| DW-04-08-F-S-236 | Samtec Inc | Board Stackers & Spacers, Pin Header, 5.99 mm, 4 Contacts, Solder, 1 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-04-08-F-S-236) RoHS : Compliant |
| 0 | ||
| DW-20-08-L-S-236 | Samtec Inc | - Bulk (Alt: DW-20-08-L-S-236) RoHS : Compliant |
| 0 | ||
| HW-06-15-G-S-236-138 | Samtec Inc | - Bulk (Alt: HW-06-15-G-S-236-138) RoHS : Compliant | 0 | |||
| DWM-22-54-G-S-236 | Samtec Inc | Board Stackers & Spacers, Pin Header, 5.99 mm, 22 Contacts, Solder, 1 Rows, 1.27 mm, DWM Series - Bulk (Alt: DWM-22-54-G-S-236) RoHS : Compliant | 0 | |||
| DW-02-17-T-S-236 | Samtec Inc | Board Stackers & Spacers, Pin Header, 5.99 mm, 2 Contacts, Solder, 1 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-02-17-T-S-236) RoHS : Compliant |
| 0 | ||
| DW-03-09-F-S-236 | Samtec Inc | Board Stackers & Spacers, Pin Header, 5.99 mm, 3 Contacts, Solder, 1 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-03-09-F-S-236) RoHS : Compliant |
| 0 | ||
| 4012-12-130508-CS2360 | TE Connectivity | - Bag (Alt: CN3980-000) RoHS : Not Compliant | 0 | |||
| MTMM-103-07-T-S-236 | Samtec Inc | - Bulk (Alt: MTMM-103-07-T-S-236) RoHS : Compliant | 0 | |||
| MTSW-109-24-G-S-236 | Samtec Inc | - Bulk (Alt: MTSW-109-24-G-S-236) RoHS : Compliant | 0 | |||
| MTSW-110-23-T-S-236 | Samtec Inc | - Bulk (Alt: MTSW-110-23-T-S-236) RoHS : Compliant | 0 | |||
| MTSW-136-22-G-S-236 | Samtec Inc | - Bulk (Alt: MTSW-136-22-G-S-236) RoHS : Compliant | 0 | |||
| DWM-01-01-L-S-236 | Samtec Inc | Board Stackers & Spacers, Pin Header, 5.99 mm, 1 Contacts, Solder, 1 Rows, DWM Series - Bulk (Alt: DWM-01-01-L-S-236) RoHS : Compliant | 0 | |||
![]() Newark | ABLS2-3.6864MHZ-D4Y-T![]() | Abracon Corporation | Crystal, 3.6864Mhz, 18Pf, 11.4Mm X 4.7Mm; |Abracon ABLS2-3.6864MHZ-D4Y-T RoHS : Compliant |
| 2,000 | |
| DW-01-08-T-S-236 | Samtec Inc | Stacking Board Connector, Dw Series; |Samtec, Inc. DW-01-08-T-S-236 RoHS : Compliant |
| 434 | ||
| DW-01-16-T-S-236 | Samtec Inc | Stacking Board Connector, Dw Series; |Samtec, Inc. DW-01-16-T-S-236 RoHS : Compliant |
| 434 | ||
| DW-04-08-S-S-236 | Samtec Inc | Conn Stack Brd, 2.54Mm, 4Pos, Hdr; |Samtec, Inc. DW-04-08-S-S-236 RoHS : Compliant |
| 328 | ||
ABLS2-3.6864MHZ-D4Y-T![]() | Abracon Corporation | Xtal 3.6864Mhz Smd 11.4Mm X 4.7Mm 30Ppm; |Abracon ABLS2-3.6864MHZ-D4Y-T RoHS : Compliant |
| 233 | ||
ABLS2-3.6864MHZ-D4Y-T![]() | Abracon Corporation | Xtal 3.6864Mhz Smd 11.4Mm X 4.7Mm 30Ppm; |Abracon ABLS2-3.6864MHZ-D4Y-T RoHS : Compliant |
| 233 | ||
| DW-10-16-T-S-236 | Samtec Inc | Conn Stack Brd, 2.54Mm, 10Pos, Hdr; |Samtec, Inc. DW-10-16-T-S-236 RoHS : Compliant |
| 221 | ||
| DW-14-16-T-S-236 | Samtec Inc | Conn Stack Brd, 2.54Mm, 14Pos, Hdr; |Samtec, Inc. DW-14-16-T-S-236 RoHS : Compliant |
| 161 | ||
| FMCA3185/HS2-36 | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA3185/HS2-36 RoHS : Not Compliant |
| 129 | ||
| ATBS-236-0405 | Amphenol Sine Systems | Backshell, 4Pos Plug Conn, 90Deg, Black; Accessory Type:Backshell; For Use With:Amphenol At06-4S Series 4 Position Plug Rectangular Connectors; Connector Shell Size:-; Cable Exit Angle:90°; Connector Body Material:Thermoplastic Body Rohs Compliant: Yes RoHS : Compliant |
| 40 | ||
| NYS236 | REAN | Mono Jack-Jack Adapter, 1/4" 2Pos; |Rean NYS236 RoHS : Compliant |
| 37 | ||
| FMCA3247/HS2-36 | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA3247/HS2-36 RoHS : Not Compliant |
| 18 | ||
| CYUSBS236 | Infineon Technologies AG | Dev Kit, Usb To I2C/Spi/Uart, 2-Channel; |Infineon Technologies CYUSBS236 RoHS : Compliant |
| 10 | ||
| SFSA030GV2AK1TO-C-5S-236-STD | Swissbit | Ssd, Internal, Slim Sata; Available Until Stocks Are Exhausted |Swissbit SFSA030GV2AK1TO-C-5S-236-STD RoHS : Compliant |
| 3 | ||
| SFSA030GU2AK1TO-I-5S-236-STD | Swissbit | Ssd, Sata Iii, 30Gb, 565Mbps, 495Mbps; Available Until Stocks Are Exhausted |Swissbit SFSA030GU2AK1TO-I-5S-236-STD RoHS : Compliant |
| 1 | ||
![]() RS | IGS236 | ifm efector inc | INDUCTIVE SENSOR, 18MM DIAMETER, 8MM FLUSH RANGE, 3WIRE DC PNP, N.O, QD |
| 4 | |
| ZS 236-11ZR-M20-1816 | Schmersal | LIMIT SWITCH |
| 4 | ||
| IIS236 | ifm efector inc | INDUCTIVE SENSOR, M30,L=60MM, RANGE 22MM NONFLUSH, NC, PNP, M12 CONNECTOR, IP69K |
| 0 | ||
| CPRS23-6-A | Ruland Manufacturing Co Inc | CONTROLFLEX COUPLING HUB, SINGLE CLAMP, 3/8IN BORE, 1.457IN OD, ALUMINUM |
| 0 | ||
| IEGS2-36517-30-V | Sensata Technologies | CIRCUIT BREAKER MAGNETIC-HYDRAULIC, 1 POLE, IEG SERIES |
| 0 | ||
| ITETA1.54S (23626) | Banner Engineering Corp | FIBER OPTICS, PLASTIC FIBER, OPPOSED, LENGTH 2M, FERRULE |
| 0 | ||
| MHZ2-20D-Y69BLS-236 | SMC Corporation of America | GRIPPER, PARALLEL STYLE, AIR, MHZ SERIES |
| 0 | ||
ABLS2-36.000MHZ-D4YF-T![]() | Abracon Corporation | CRYSTAL, MICROPROCESSOR, 11.4X 4.7X 3.3MM, 36.000MHZ, -40C/85C, +/- 30PPM RoHS : Unknown |
| 0 | ||
| 36JUHT2BG (US2:36JUHT2BG) | Siemens | STARTER, AUTOXFMR, SZ4,240VAC, N1 ; US2:36JUHT2BG |
| 0 | ||
| 36GUGT4NH (US2:36GUGT4NH) | Siemens | STARTER, AUTOXFMR, SZ2.5,480VAC, N12 ; US2:36GUGT4NH |
| 0 | ||
| 36HUGC4BF (US2:36HUGC4BF) | Siemens | STARTER, Y-D CLSD, SZ3,120VAC, N1 ; US2:36HUGC4BF |
| 0 | ||
| 36JUHC4WF (US2:36JUHC4WF) | Siemens | STARTER, Y-D CLSD, SZ4,120VAC, N4X ; US2:36JUHC4WF |
| 0 | ||
| 36JUH04BF (US2:36JUH04BF) | Siemens | STARTER, Y-D OPN, SZ4,120VAC, N1 ; US2:36JUH04BF |
| 0 | ||
| 36EUE06BF (US2:36EUE06BF) | Siemens | STARTER, Y-D OPN, S1.75,120VAC, N1 ; US2:36EUE06BF |
| 0 | ||
| 36MPXT4EH (US2:36MPXT4EH) | Siemens | STARTER, AUTOXFMR, SZ6,480VAC/DC, N4 ; US2:36MPXT4EH |
| 0 | ||
![]() Bisco Industries | SS2-36 | WM Berg | 13 | |||
| 2010-R-SS-236-1 | Accurate Screw Machine | 12 | ||||
| 2010-R-SS-.236-12 | Accurate Screw Machine | 2 | ||||
![]() Rochester Electronics | MPS2369RLRA![]() | onsemi | Small Signal Bipolar Transistor, 0.2A I(C), 15V V(BR)CEO, 1-Element, NPN, Silicon, TO-92 RoHS : Compliant |
| 32,588 | |
SN74ALS236N![]() | Texas Instruments | FIFO, 64X4, 22ns, Asynchronous, TTL, PDIP16 RoHS : Compliant |
| 3,457 | ||
TPS2363PFB![]() | Texas Instruments | Hot Swap 2 Ch 3.6V, 13.2V 48-QFP Tray RoHS : Compliant |
| 16,274 | ||
| HI20201JCPS2361 | Harris Semiconductor | 10-BIT, 160 MSPS, ULTRA HIGH SPEED D/A CONVERTER RoHS : Not Compliant |
| 36 | ||
| LT M67D-R2S2-36-L6Z6-1.5-S | ams OSRAM Group | Mini TOPLED, True Green RoHS : Compliant |
| 511,210 | ||
![]() Sager | MTMM-102-04-G-S-236 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 2,150 | |
| MTSW-105-09-G-S-236 | Samtec Inc | VARIABLE HEIGHT PCB HEADER STRIPS, 0.100 PITCH RoHS : Compliant |
| 1,587 | ||
| DW-03-16-T-S-236 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 357 | ||
| DW-20-08-L-S-236 | Samtec Inc | FLEXIBLE BOARD STACKING HEADER WITH FIXED TAIL LENGTH, 0.100 PITCH RoHS : Compliant |
| 120 | ||
| DW-40-15-G-S-236 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 94 | ||
| DW-40-17-T-S-236 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 79 | ||
| S236 | ABB Group | Thomas & Betts | 0 | |||
| MTLW-105-07-L-S-236 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| DW-04-08-F-S-236 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| DW-16-16-T-S-236 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-08-09-T-S-236-102 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-06-15-G-S-236-138 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HMTSW-102-23-F-S-236 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| FFSD-13-S-23.62-01-N | Samtec Inc | Ribbon Cables / IDC Cables .050 Low Profile Tiger Eye IDC Ribbon Cable Assembly RoHS : Compliant |
| 0 | ||
| DW-05-08-T-S-236 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TME | ABLS2-3.6864MHZ-D4Y-T![]() | Abracon Corporation | 11.4x4.7mm; 18pF; HC49/U; SMD; ESR: 180Ω; 3.686MHz; -40÷85°C; 100uW RoHS : Compliant |
| 7,000 | |
| ZRS-236 | 4Carmedia | Connector; ISO; Mercedes |
| 29 | ||
| TS 2/36 | Intel Corporation | Transformer: mains; 2VA; 230VAC; 8.8V; 0.22A; screw type; IP00 |
| 13 | ||
| 6110-12-130508-CS2360 | TE Connectivity | 6110-12-130508-CS2360 |
| 1 | ||
| 5414-02-130008-CS2360 | TE Connectivity | Enclosure for connectors: D-Sub |
| 1 | ||
| 5424-12-341012-CS2360 | TE Connectivity | 5424-12-341012-CS2360 |
| 1 | ||
| 3024-12-561422-CS2360 | TE Connectivity | 3024-12-561422-CS2360 |
| 1 | ||
| SS236-16-80 | Bahco | Universal joint; 1/2"; stainless steel; 80mm |
| 0 | ||
| LT M67D-R2S2-36-L6Z6-1.5-S | ams OSRAM Group | LED; green; SMD; 0805; 140÷280mcd; 2.1÷3VDC; 2.2x1.4x1.3mm; 120° |
| 0 | ||
| IIS236 | ifm efector inc | Sensor: inductive |
| 0 | ||
| SS236-08-80 | Bahco | Universal joint; 1/4"; stainless steel; 80mm |
| 0 | ||
| SS236-24-110 | Bahco | Universal joint; 3/4"; stainless steel; 110mm |
| 0 | ||
| IES236 | ifm efector inc | Sensor: inductive |
| 0 | ||
| NYS236 | REAN | Connector: Jack 6,3mm; socket; female; mono; straight; for cable |
| 0 | ||
| IGS236 | ifm efector inc | Sensor: inductive |
| 0 | ||
![]() ComSIT USA | CDP68HC68T1M296S2366 | Intersil Corporation | Electronic Component RoHS : Not Compliant | 1,155 | ||
![]() Interstate Connecting Components | 6114-12-561316-CS2360 | TE Connectivity | 6114-12-561316-CS2360 RoHS : Not Compliant | 0 | ||
| TV06RQS-23-6PC L/C | Amphenol Aerospace | 0 | ||||
| 3012-12-230610-CS2360 | TE Connectivity | 3012-12-230610-CS2360 | 0 | |||
| 5410-02-130006-CS2360 | TE Connectivity | 5410-02-130006-CS2360 | 0 | |||
| 5420-02-340012-CS2360 | TE Connectivity | 5420-02-340012-CS2360 | 0 | |||
| 5424-12-340812-CS2360 | TE Connectivity | 5424-12-340812-CS2360 | 0 | |||
| 55A6893-26-8L2CS2360 | TE Connectivity | 55A6893-26-8L2CS2360 | 0 | |||
| 5422-12-130508-CS2360 | TE Connectivity | 5422-12-130508-CS2360 | 0 | |||
| 5440-12-561316-CS2360 | TE Connectivity | 5440-12-561316-CS2360 RoHS : Not Compliant | 0 | |||
| ATBS-236-0405 | Amphenol Sine Systems | BACKSHELL FOR 4 POSITION PLUGS | 0 | |||
| 6114-12-340812-CS2360 | TE Connectivity | 6114-12-340812-CS2360 RoHS : Not Compliant | 0 | |||
| 5422-12-441116-CS2360 | TE Connectivity | 5422-12-441116-CS2360 RoHS : Not Compliant | 0 | |||
| TV07RQS-23-6SC L/C | Amphenol Aerospace | 0 | ||||
| 6110-12-130508-CS2360 | TE Connectivity | 6110-12-130508-CS2360 | 0 | |||
| 5416-12-130508-CS2360 | TE Connectivity | 5416-12-130508-CS2360 RoHS : Not Compliant | 0 | |||
![]() NexGen Digital | AS236-321FL | Skyworks Solutions Inc | 2,638 | |||
![]() PEI Genesis | S2360-3516-34-6 | SOURIAU-SUNBANK |
| 0 | ||
| S2362-1606R-34-6 | SOURIAU-SUNBANK |
| 0 | |||
| S2362-5007-34 | SOURIAU-SUNBANK |
| 0 | |||
| S2362-5011-34-24 | SOURIAU-SUNBANK |
| 0 | |||
| SNTS23-61/36R-6-V | Amphenol PCD |
| 0 | |||
| TVP00RQS-23-6P-LC | Amphenol Corporation |
| 0 | |||
| S2360-1306-34-6 | SOURIAU-SUNBANK |
| 0 | |||
| S2362-1309R-34 | SOURIAU-SUNBANK |
| 0 | |||
| S2362-1911-34-N | SOURIAU-SUNBANK |
| 0 | |||
| TVP00RQS-23-6SD | Amphenol Corporation |
| 0 | |||
| TV06RQS-23-6SA-LC | Amphenol Corporation |
| 0 | |||
| TV07RQS-23-6PA | Amphenol Corporation |
| 0 | |||
| TVP00RQS-23-6SE | Amphenol Corporation |
| 0 | |||
| TV07RQS-23-6SA | Amphenol Corporation |
| 0 | |||
| TVP00RQS-23-6SE-LC | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | MTMM-102-04-G-S-236 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,419 | |
| MTSW-105-09-G-S-236 | Samtec Inc | PCB Header, 2.54mm Pitch, SMT, Male, Wid RoHS : Compliant |
| 1,047 | ||
| MTLW-110-07-G-S-236 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 569 | ||
| DW-01-08-T-S-236 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 286 | ||
| DW-02-17-T-S-236 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 261 | ||
| DW-02-16-T-S-236 | Samtec Inc | .100 Flex Stack RoHS : Compliant |
| 261 | ||
| DW-03-16-T-S-236 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 236 | ||
| DW-04-08-G-S-236 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 229 | ||
| DW-04-09-T-S-236 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 216 | ||
| MTLW-136-07-G-S-236 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 160 | ||
| DW-16-17-L-S-236 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 106 | ||
| DW-20-08-L-S-236 | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 79 | ||
| DW-40-15-G-S-236 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 62 | ||
| DW-40-17-T-S-236 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 52 | ||
| TW-26-09-G-S-236-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 52 | ||
![]() PUI | 2011-2X40G10S-2.3-6.1B-HT | 541 | ||||
| NYS236 | 59 | |||||
| 2011-2X01G10S-2.3-6.1B-HT | 24 | |||||
| 2011-2X03G10S-2.3-6.1B-HT | 10 | |||||
![]() Richardson RFPD | 3FS-236 | Tamura Corporation of America | Power Transformer 2500Vrms 1.1VA 6 Terminal PC Pin RoHS : Compliant |
| 0 | |
| 450S2368 | CTS Corporation | POTENTIOMETER RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | MEDS-23661-MT5000A-3/8-6-S | TE Connectivity | INSTOCK | 2,275 | ||
| MPS2369RL1 | INSTOCK | 900 | ||||
![]() Avnet Abacus | ABLS2-3.6864MHZ-D4Y-T![]() | Abracon Corporation | Crystal 36864 MHz SMD 114mm x 47mm 30 ppm 18 pF 30 ppm ABLS2 - Tape and Reel (Alt: ABLS2-3.6864MHZ-D4Y-T) RoHS : Compliant | 4,000 | ||
| DW-02-16-T-S-236 | Samtec Inc | Stacking Board Connector DW Series 2 Contacts Header 254 mm Through Hole 1 Rows (Alt: DW-02-16-T-S-236) RoHS : Compliant | 0 | |||
| DW-04-08-G-S-236 | Samtec Inc | Stacking Board Connector DW Series 4 Contacts Header 254 mm Through Hole 1 Rows (Alt: DW-04-08-G-S-236) RoHS : Compliant | 0 | |||
| DW-10-16-T-S-236 | Samtec Inc | Stacking Board Connector DW Series 10 Contacts Header 254 mm Through Hole 1 Rows (Alt: DW-10-16-T-S-236) RoHS : Compliant | 0 | |||
| MTLW-110-07-G-S-236 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 10 Contacts Through Hole MTLW Series (Alt: MTLW-110-07-G-S-236) RoHS : Compliant | 0 | |||
| MTSW-104-23-F-S-236 | Samtec Inc | Conn Unshrouded Header HDR 4 POS 254mm Solder ST ThruHole (Alt: MTSW-104-23-F-S-236) RoHS : Compliant | 0 | |||
| MTSW-108-23-F-S-236 | Samtec Inc | Conn Unshrouded Header HDR 8 POS 254mm Solder ST ThruHole (Alt: MTSW-108-23-F-S-236) RoHS : Compliant | 0 | |||
| MTLW-140-07-L-S-236 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 40 Contacts Through Hole MTLW Series (Alt: MTLW-140-07-L-S-236) RoHS : Compliant | 0 | |||
| TW-15-09-T-S-236-094 | Samtec Inc | Stacking Board Connector TW Series 15 Contacts Header 2 mm Through Hole 1 Rows (Alt: TW-15-09-T-S-236-094) RoHS : Compliant | 0 | |||
| TW-10-09-G-S-236-100 | Samtec Inc | Stacking Board Connector TW Series 10 Contacts Header 2 mm Through Hole 1 Rows (Alt: TW-10-09-G-S-236-100) RoHS : Compliant | 0 | |||
| TW-13-09-T-S-236-094 | Samtec Inc | Stacking Board Connector TW Series 13 Contacts Header 2 mm Through Hole 1 Rows (Alt: TW-13-09-T-S-236-094) RoHS : Compliant | 0 | |||
| DW-03-09-T-S-236-002 | Samtec Inc | Board Stackers Spacers Pin Header 599 mm 3 Contacts Solder 1 Rows 254 mm DW Series (Alt: DW-03-09-T-S-236-002) RoHS : Compliant | 0 | |||
| HW-04-07-T-S-236-060 | Samtec Inc | (Alt: HW-04-07-T-S-236-060) RoHS : Compliant | 0 | |||
| HW-06-15-FM-S-236-138 | Samtec Inc | (Alt: HW-06-15-FM-S-236-138) RoHS : Compliant | 0 | |||
ABLS2-36.000MHZ-D4YF-T![]() | Abracon Corporation | Crystal Microprocessor 36 MHz SMD 114mm x 47mm x 33mm 30 ppm 18 pF 30 ppm ABLS2 - Tape and Reel (Alt: ABLS2-36.000MHZ-D4YF-T) RoHS : Compliant | 0 | |||
![]() Avnet Asia | MTLW-103-07-L-S-236 | Samtec Inc | (Alt: MTLW-103-07-L-S-236) RoHS : Compliant | 0 | ||
| ABLS2-3.6864MHZ-12-DQ-T | Abracon Corporation | (Alt: ABLS2-3.6864MHZ-12-DQ-T) RoHS : Compliant | 0 | |||
| ABLS2-3.6864MHZ-12-D4-T | Abracon Corporation | ABRABLS2-3.6864MHZ-12-D4-T HC/49US (AT49 (Alt: ABLS2-3.6864MHZ-12-D4-T) RoHS : Compliant | 0 | |||
| LT M67D-R2S2-36-L6Z6-1.5-S | ams OSRAM Group | (Alt: LT M67D-R2S2-36-L6Z6-1.5-S) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | ABLS2-36.000MHZ-D4YF-T![]() | Abracon Corporation | CRYSTAL 36.0000MHZ 18PF SMD RoHS : Unknown |
| 0 | |
ABLS2-3.6864MHZ-D4Y-T![]() | Abracon Corporation | CRYSTAL 3.6864MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | MS-2368P | Spaenaur | IN STOCK SHIP TODAY | 300 | ||
| MS-2361P-RC | Spaenaur | IN STOCK SHIP TODAY |
| 88 | ||
| MPS2369 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 17 | ||
![]() EBV Elektronik | LTM67D-R2S2-36-L6Z6-1.5-S | ams OSRAM Group | LED Single Chip True Green 534nm 10mA 2Pin SMD TR (Alt: Q65113A4944) RoHS : Compliant | 9,000 | ||
![]() Master Electronics | S236 | Thomas & Betts | Superstrut® - Bracket - 90 Degree - Length 20-1/2 Inches - Material Steel - GoldGalv Finish RoHS : Compliant |
| 0 | |
| MTSW-101-23-G-S-236 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-105-09-G-S-236 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-101-08-G-S-236 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-105-07-L-S-236 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-102-04-G-S-236 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| DW-03-16-T-S-236 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-04-08-F-S-236 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-16-16-T-S-236 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-20-08-L-S-236 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-31-07-S-S-236 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-32-07-T-S-236 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-40-17-T-S-236 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| FFMD-08-S-23.64-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-08-09-T-S-236-102 | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-08-09-T-S-236-102 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2346/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-240 Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 36 inch length using LMR-240 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 36 inch length using LMR-240 coax with Times Microwave components with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2346/HS2-36 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2346/HS2-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2346/HS2-36 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 36 inch length using LMR-240 coax with Times Microwave components with double heatshrink. |
| 4,213 | |
| PE3C1135/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS2-36 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS2-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink. |
| 2,106 | ||
| PE3C0053/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-240 Coax with Double Heatshrink., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-240 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0053/HS2-36 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0053/HS2-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 36 inch length using LMR-240 coax with double heatshrink. |
| 2,009 | ||
| PE33401/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 36 Inch Length Using 75 Ohm RG179 Coax with Double HeatShrink., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax with double heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE33401/HS2-36 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33401/HS2-36 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG179 coax with double heatshrink. |
| 289 | ||
| PE3W15032/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm TNC Female Bulkhead to 75 Ohm N Male Cable 36 Inch Length Using 75 Ohm RG179 Coax with Double HeatShrink., Radio frequency assembly 75 Ohm TNC female bulkhead to 75 Ohm N male cable 36 inch length using 75 Ohm RG179 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm TNC female bulkhead to 75 Ohm N male cable 36 inch length using 75 Ohm RG179 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC bulkhead cable connection on one end and a type N cable connection on the other. Our TNC to type N cable assembly has a female gender on end 1 and a male on end 2. PE3W15032/HS2-36 can also be known as a TNC jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15032/HS2-36 RF cable has a FEP jacket of 0.100-inch diameter. The flexible RF cable has a between series connection. TNC jack to type N plug cable assembly PE3W15032/HS2-36 is built with RG179 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 75 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15032/HS2-36 can also be used in the other direction and will be a type N male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to type N RF cable assembly as per your requirements. |
| 255 | ||
| PE3W06854/HS2-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 36 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 36 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 36 inch length using LMR-195 coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 36 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854/HS2-36, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854/HS2-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854/HS2-36 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 36 inch length using LMR-195 coax with double heatshrink. |
| 114 | ||
| PE3899LF/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using 93 Ohm RG62 Coax with Double HeatShrink., Radio frequency assembly SMA male to SMA male cable 36 inch length using 93 Ohm RG62 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 36 inch length using 93 Ohm RG62 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3899LF/HS2-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3899LF/HS2-36 is built with RG62 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using 93 Ohm RG62 coax with double heatshrink. |
| 54 | ||
| PE3C1041/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to TNC Male Right Angle Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to TNC male right angle low loss cable 36 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 36 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1041/HS2-36 can also be known as a low loss N type plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C1041/HS2-36 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1041/HS2-36 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle low loss cable 36 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE345/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Right Angle Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 36 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 36 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE345/HS2-36 can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE345/HS2-36 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE345/HS2-36 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 36 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C2887/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Mini SMP Female Right Angle to SMA Male Cable 36 Inch Length Using PE-P047 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA male cable 36 inch length using PE-P047 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male cable 36 inch length using PE-P047 coax with double heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This mini SMP to SMA cable is a female to male coax assembly, PE3C2887/HS2-36, can also be known as a right angle mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C2887/HS2-36 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2887/HS2-36 can also be used in the other direction and will be SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male cable 36 inch length using PE-P047 coax with double heatshrink. |
| 0 | ||
| PE3C7527/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 36 Inch Length Using PE-P086 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 36 inch length using PE-P086 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female right angle to SMA female bulkhead cable 36 inch length using PE-P086 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3C7527/HS2-36 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7527/HS2-36 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle Mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. Mini SMP jack to SMA jack cable assembly PE3C7527/HS2-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7527/HS2-36 can also be used in the other direction and will be a SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1609/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMB Plug to SMA Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 36 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 36 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-36 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-36 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 36 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3W00029/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 36 Inch Length Using LMR-400 Coax with Double HeatShrink., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 36 inch length using LMR-400 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N female bulkhead low loss cable 36 inch length using LMR-400 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and N type bulkhead cable connection on the other. Our low loss type N to type N cable assemblies have a female gender on end 1 and female on end 2. PE3W00029/HS2-36 can also be known as a low loss N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3W00029/HS2-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N female bulkhead to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 36 inch length using LMR-400 coax with double heatshrink. |
| 0 | ||
| PE35568/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMB Jack Cable 36 Inch Length Using RG316-DS Coax with Double HeatShrink., Radio frequency assembly SMA male to SMB jack cable 36 inch length using RG316-DS coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack cable 36 inch length using RG316-DS coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assembly has male gender on end 1 and jack on end 2. PE35568/HS2-36 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMB female cable assembly PE35568/HS2-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35568/HS2-36 RF cable are available on our downloadable PDF datasheet.PE35568/HS2-36 can also be used in the other direction and will be SMB jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C0051/HS2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 36 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 36 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-36 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-36 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 36 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
![]() Vyrian | MPS2369ARLRPG![]() | onsemi | Small Signal Bipolar Transistor, 0.2A I(C), 15V V(BR)CEO, 1-Element, NPN, Silicon, TO-92 RoHS : Compliant | 13,374 | ||
MPS2369G![]() | onsemi | Small Signal Bipolar Transistor, 0.2A I(C), 15V V(BR)CEO, 1-Element, NPN, Silicon, TO-92 RoHS : Compliant | 13,318 | |||
MPS2369RLRAG![]() | onsemi | Small Signal Bipolar Transistor, 0.2A I(C), 15V V(BR)CEO, 1-Element, NPN, Silicon, TO-92 RoHS : Compliant | 13,195 | |||
TPS2363PFBRG4![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, PQFP48 RoHS : Compliant | 9,760 | |||
| TMS2364-25NL | Texas Instruments | MASK ROM, 8KX8, 250ns, NMOS, PDIP28 RoHS : Not Compliant | 7,989 | |||
TPS2363PFBG4![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, PQFP48 RoHS : Compliant | 7,522 | |||
| SN54ALS236J | Texas Instruments | FIFO, 64X4, 24ns, Asynchronous, TTL, CDIP16 RoHS : Not Compliant | 6,806 | |||
| S236001 | Kingston Technology Company | 6,414 | ||||
| SN74ALS236D3 | Texas Instruments | FIFO, 64X4, Asynchronous, TTL, PDSO16 RoHS : Not Compliant | 5,615 | |||
| SN74ALS236D | Texas Instruments | FIFO, 64X4, 22ns, Asynchronous, TTL, PDSO16 RoHS : Not Compliant | 5,314 | |||
| TMS2364-15NL | Texas Instruments | MASK ROM, 8KX8, 150ns, NMOS, PDIP28 RoHS : Not Compliant | 4,429 | |||
| TMS2364-20NL | Texas Instruments | MASK ROM, 8KX8, 200ns, NMOS, PDIP28 RoHS : Not Compliant | 4,379 | |||
| SN54ALS236FK | Texas Instruments | FIFO, 64X4, 24ns, Asynchronous, TTL, CQCC20 RoHS : Not Compliant | 4,361 | |||
MPS2369AG![]() | onsemi | Small Signal Bipolar Transistor, 0.2A I(C), 15V V(BR)CEO, 1-Element, NPN, Silicon, TO-92 RoHS : Compliant | 4,230 | |||
| QCMS-2368 | Broadcom Limited | 4,006 |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |