HT-F196UD datasheet(20/21 Pages) INOLUX

20 / 21 page

Top View (0603)

HT-F196 Series

Official Product

Product: HT-F196 Series

Data Sheet No.

Tentative Product

****************

HT-F196 Series

Specifications are subject to change without notice. Data and

drawings herein are copyrighted.

June 23, 2013

Version of 1.0

Page

20/21

Reworking

•

Rework should be completed within 5 seconds under 260°C.

•

The iron tip must not come in contact with the copper foil.

•

Twin-head type is preferred.

Cleaning

Following are cleaning procedures after soldering:

•

An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.

•

Temperature x Time should be 50°C x 30sec. or <30°C x 3min

•

Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter

•

Curing: 100°C max, <3min

Cautions of Pick and Place

•

Avoid stress on the resin at elevated temperature.

•

Avoid rubbing or scraping the resin by any object.

•

Electric-static may cause damage to the component. Please ensure that the equipment

is properly grounded. Use of an ionizer fan is recommended.

HT-F196UD 데이터시트(PDF) 20 Page - Inolux Corporation