| 전자부품 데이터시트 검색엔진 |
|
MRF24XA 데이터시트(PDF) 36 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MRF24XA 데이터시트(HTML) 36 Page - Microchip Technology |
|
36 / 258 page ![]() MRF24XA DS70005023C-page 36 Preliminary 2015 Microchip Technology Inc. bit 4 TXBUFEMPTY: TX Buffer Empty bit TXBUFEMPTY = 1 indicates that the Host MCU can safely start writing a new frame to the buffer with- out overwriting any content that is in use. Writing a single byte to the buffer clears this bit. TXBUFEMPTY = 0 does not prevent the host from writing further bytes to the buffer. TXBUFEMPTY is set by the device when transmission is complete. 1 = MCU can safely start writing a new frame to the buffer 0 = Buffer is full, or being written to When TRXMODE = 00: Packet mode is configured then TXBUFEMPTY is set at the same time as TXST is cleared and an interrupt is generated. Therefore, this bit provides no extra information. When TRXMODE = 10: TX-Streaming mode is configured then TXBUFEMPTY is set at the same time as one of the buffers becomes free, while TXST may be set. Therefore, the host MCU uses TXBUFEMPTY to ensure that the next frame starts loading to the buffers, without overwriting a packet being sent (TXOVFIF). bit 3 CSMAEN: CSMA-CA Enable bit This bit enables CSMA-CA algorithm before transmission. 1 = CSMA-CA enabled 0 = CSMA-CA disabled bit 2-0 DR<2:0>: Transmit Data Rate Field bits 111 = Reserved 110 = 2 Mbps 101 = 1 Mbps 100 = 500 kbps 011 = 250 kbps 010 = 125 kbps 001 = Reserved 000 = Reserved When transmitting an Auto-ACK frame with Adaptive Data Rate in response to a received frame, the AckDataRate field in the received frame automatically determines the data rate of the PHY, and not by this Register field. In all other cases, use this Register field as the current PHY data rate when transmitting. The PHY automatically determines the data rate for all received frames regardless of this Register field and the Adaptive Data Rate Configuration. For more information, refer to Register 2-43. Note 1: Transmission may include automatic security processing, CRC appending, CSMA-CA channel access, Acknowledge reception and retransmissions depending on the register Configuration and the Frame Con- trol field of the frame to be transmitted. 2: DTSM has no relevance in reception as the host can always reconfigure the security material before set- ting RXDEC. REGISTER 2-17: TXCON (TRANSMIT CONTROL REGISTER) (CONTINUED) ADDRESS: 0x12 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |