| 전자부품 데이터시트 검색엔진 |
|
CX28331 데이터시트(PDF) 45 Page - Synaptics Incorporated. |
|
|
|||||||||||||||||||||||||||||
CX28331 데이터시트(HTML) 45 Page - Synaptics Incorporated. |
|
45 / 68 page ![]() CX28331/CX28332/CX28333 2.0 Functional Description Single/Dual/Triple E3/DS3/STS-1 Line Interface Unit 2.4 Jitter Tolerance 100985A Conexant 2-13 2.4 Jitter Tolerance The CX2833i receiver is able to tolerate a specified amount of high-frequency jitter in the received signal while providing error-free operation (generally defined as a bit error rate of less than 10-9). The specifications (illustrated in Figure 2-9) for jitter tolerance are discussed in the following documents: • E3 rate – ITU-T G.823 and ETSI TBR24 contain frequency masks for input jitter tolerance. NOTE: To meet jitter transfer requirements for loop-timed operation, an external jitter attenuator is required. The jitter attenuator lessens jitter from the receive clock. • DS3 rate – ITU-T G.823 and Bellcore GR499 specify jitter tolerance frequency masks for Category I and Category II interfaces. • STS-1 rate – Bellcore GR253 specifies a jitter tolerance. It is noted that the STS-1 jitter tolerance differs from DS3 requirements only for Category II interfaces. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |