13/22

XC6806

Series

■

NOTE ON USE

1. Even temporary or transient voltage drops and rises may cause deterioration or destruction if the absolute maximum ratings

are exceeded.

2. If the wiring has a high impedance, the output current may cause unstable operation. In particular, strengthen the wiring of the

possible to the IC to keep the wiring short.

4. An overcurrent protection function is not provided for the current from the BAT pin to the OUT pin. Exercise sufficient caution to

ensure that the current does not exceed 500mA.

5. This IC is not integrated the over current protection function from the BAT pin to the OUT pin and the over discharge protection

function so should build separately the protection functions for the Lithium Ion Battery.

6.This IC uses an external thermistor for high-accuracy detection and control of temperature. Test the position of the external

thermistor sufficiently to verify that temperature can be accurately detected.

7. Risk of destruction if the battery polarity is reversed. Never use with the polarity reversed, as safety cannot be guaranteed in

the event that the IC explodes.

8. Short-circuiting to an adjacent pin may cause malfunctioning and damage. Exercise caution during mounting and use.

10. The set charge current must always be within therange 10mA to 385mA.

13. The charge is stopped lower than the setting voltage by the back current protection if the charge voltage is set high and the

input voltage is low.

14. Torex places an importance on improving our products and their reliability.

We request that users incorporate fail-safe designs and post-aging protection treatment when using Torex products in

their systems.