SiP43101

Vishay Siliconix

New Product

Document Number: 72640

S-32451, Rev. A—01-Dec-03

www.vishay.com

1

Dual Output Power Switch with Inverting Input

FEATURES

D Two Output Power Switches

D Total Output Drive — 200 mA Continuous

D 9-V to 35-V Supply Voltage Range

D Low Side or High Side Switch Configuration

D User Programmable Phasing of Output Switches

D Internal Output Over Voltage Clamp For Driving Inductive

Loads

D Current Limit Protection

D Thermal Shutdown Protection

D UVLO With User Programmable Time Delay

APPLICATIONS

D Optical Detectors for Factory Automation

DESCRIPTION

SiP43101 is a dual power switch IC which contains all control

and power switching circuitry required to drive resistive and

inductive loads in industrial applications. The output switches

are NPN power transistors which can be configured as either

high-side or low-side switches. These switches can operate

from voltages as high as 35 V and have a continuous output

current rating of 200 mA, combined or individually. Internal

zener diodes are provided to clamp the power switch voltages

to safe levels when driving inductive loads. The IN1 pin is a

non-inverting input which controls the output of switch 1.

A 2-input Exclusive OR gate input controls switch 2, allowing

switch 2 to be controlled by either an inverting or non-inverting

control signal. SiP43101 contains under voltage lockout,

UVLO, a user definable turn on delay, current limit, short

circuit protection, and thermal shutdown.

SIP43101 is available in 16-pin TSSOP and PowerPAKr

MLP-44 packages for operation over the temperature range

of −40 to 85 °C.

TYPICAL APPLICATION CIRCUIT

FAULT

GND

SiP43101

10 kW

5 V

1 kW

100 nF

Load

Load

+10 to 30 V

100 nF

INPUT

Both Switches Configured as Low-Side, Switch 2 Inverted With Respect to Switch 1

10 kW

GND