Vertical Cavity Surface

Emitting Laser

OPV300, OPV310, OPV310Y, OPV314,

OPV314Y

© TT electronics plc

Issue A

11/2016

Page 2

TT Electronics | OPTEK Technology, Inc.

1645 Wallace Drive, Suite 130, Carrollton, TX 75006 |Ph: +1 972-323-2200

www.ttelectronics.com | sensors@ttelectronics.com

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Operating Temperature Range

0°C to +70°C

Storage Temperature Range

-40°C to +100°C

Maximum Forward Peak Current, continuous

12 mA

Maximum Reverse Voltage

5 V

Max. Continuous Optical Power at 70° C

1.1 mW

Lead Soldering Temperature

260°C for 10 sec.

Maximum Forward Current, pulsed (1 µs P.W., 10% D.C.)

48 mA

Electrical Specifications

Notes:

(1)

Threshold Current is based on the two line intersection method specified in Telcordia GR-468-

Core. Line 1 from 4 mA to 6 mA. Line 2 from 0 mA to 0.5 mA.

(2)

Series Resistance is the slope of the Voltage-Current line from 5 to 8 mA.

(3)

Slope efficiency is the slope of the best fit LI line from 5 mA to 8 mA using no larger than .25 mA

test interval points.

(4)

Using data points taken for slope efficiency above, delta L/delta I shall be calculated for each

adjacent pair of points.

Additional laser safety information can be found on

the Optek website. See application bulletin #221.

Classification is not marked on the device due to

space limitations. See package outline for center-

line of optical radiance. Operating devices beyond

maximum rating may result in hazardous radiation

exposure.