MB96310 datasheet(67/82 Pages) CYPRESS

67 / 82 page

Document Number: 002-04592 Rev. *A

Page 66 of 81

MB96310 Series

Accuracy and setting of the A/D Converter sampling time

If the external impedance is too high or the sampling time too short, the analog voltage charged to the internal sample and hold

capacitor is insufficient, adversely affecting the A/D conversion precision.

To satisfy the A/D conversion precision, a sufficient sampling time must be selected. The required sampling time depends on the

external driving impedance Rext, the board capacitance of the A/D converter input pin Cext and the AVcc voltage level. The following

replacement model can be used for the calculation:

The sampling time should be set to minimum “7

“. The following approximation formula for the replacement model above can be used:

Tsamp [min] = 7 × (Rext × (Cext + CIN) + (Rext + RADC) × CADC)

• Do not select a sampling time below the absolute minimum permitted value

(0.5

s for 4.5V AVcc 5.5V; 1.2 s for 3.0V AVcc 4.5V).

• If the sampling time cannot be sufficient, connect a capacitor of about 0.1

F to the analog input pin. In this case the internal

sampling capacitance CADC will be charged out of this external capacitance.

• A big external driving impedance also adversely affects the A/D conversion precision due to the pin input leakage current IIL

(static current before the sampling switch) or the analog input leakage current IAIN (total leakage current of pin input and

comparator during sampling). The effect of the pin input leakage current IIL cannot be compensated by an external capacitor.

• The accuracy gets worse as |AVRH - AVRL| becomes smaller.

Comparator

Sampling switch

RADC

CADC

Analog

Rext

Cext

input

MCU

Source

Rext: external driving impedance

Cext: capacitance of PCB at A/D converter input

RADC: resistance within MCU: 2.6k (max) for 4.5V AVcc 5.5V

12k

 (max) for 3.0V AVcc 4.5V

CADC: sampling capacitance within MCU: 10pF (max)

CIN

CIN: capacitance of MCU input pin: 15pF (max)

MB96310 데이터시트(PDF) 67 Page - Cypress Semiconductor