© TT electronics plc

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

NPN Phototransistor

OP800SL Series, OP800WSL Series

OP830SL Series, OP830WSL Series

Issue A

08/2016

Page 3

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

Storage Temperature Range

-65

Opera ng Temperature Range

-65

Collector-Base Voltage (applies to OP800SL only - does not apply to OP800WSL)

30 V

Collector-Emi er Voltage

OP800 (SL, WSL)

OP830 (SL, WSL)

30 V

15 V

Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]

260° C

(1)

Power Dissipa on

250 mW

(2)

Con nuous Collector Current

50 mA

Emi er-Base Voltage (applies to OP800 (SL, WSL) only)

5 V

Emi er-Collector Voltage (applies to all OP800 and OP830 devices)

5 V

Electrical Specifications

Notes:

1. RMA flux is recommended. Dura on can be extended to 10 seconds maximum when flow soldering. A maximum 20 grams force may be applied

to the leads when soldering.

2. Derate linearly 2.5 mW/° C above 25° C.

3. Junc on temperature maintained at 25° C.