2002 May 23

5

Philips Semiconductors

Product specification

I-CODE Evaluation kit

SLEV900

6.2.2

The serial PC library crm_s32.dll is not part of the SLEV900, but is supplied by Philips as a design tool that is free of

charge and without any warranties.

DISK

PROGRAM

DESCRIPTION

Disk 1

SETUP.EXE

installation program of WIN demo ICODE.EXE

Disk 2

SETUP.W02

second part of installation program

Disk 3

DOS_SW3.ZIP

DOS demo CRMTEST3.EXE

VC6SOURCE.ZIP

visual C++ 6.0 source codes of WIN demo ICODE.EXE

6.2.3

The I-CODE demonstration software works with

Windows 95, Windows 98, and Windows NT 4.0.

Insert disk 1, start the SETUP.EXE program and follow the

instructions.

If you want to change the COM port after the software

installation, open the file ICODE.INI, in the directory where

you have installed the software, with a text editor and

modify the line COM = COMx (x = 1 or 2).

The baud rate of the reader is set to 57.6 kbaud as default.

6.2.4

SOFTWARE

The Windows Demo Software of the I-code Evaluation Kit

does not allow the changing of Block 2 (Write Access

Conditions) and of the QUIET bits in Block 3. The use of

Family Codes and/or Application Identifiers is not

supported.

7

SOFTWARE DESCRIPTION

The demonstration software shows the basic features of

the I-CODE system. To start the program double click the

I-CODE demo icon.

7.1

Main screen

The main screen allows the user to set up some

parameters (see Table 1) and to start all supported

commands; see the buttons in the dialogue box shown in

Fig.2.

Fig.2 Main screen of demonstration software.

Table 1

Parameters in the main screen of the demonstration software

To start a command click the corresponding button in the dialogue box or press the Alt-key and the underlined character.

To exit a command, first click the Stop-button and then the Exit-button.

PARAMETER

DESCRIPTION

EXAMPLE

1st block

first block in the user memory with which you want to start the access; the first

block in the user memory is block 4

4

# of blocks

number of blocks starting with the 1st block you want to access

4

# of labels

maximum number of labels that will be in the antenna field

8

Enable FastMode

if you click at this button the I-CODE reader works in fast mode