For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

7

7 - 8

HMC463LP5 / 463LP5E

v09.0717

GaAs pHEMT MMIC LOW NOISE

AGC AMPLIFIER, 2 - 20 GHz

Evaluation PCB

The circuit board used in the application should

use RF circuit design techniques. Signal lines

should have 50 Ohm impedance while the package

ground leads and package bottom should be

connected directly to the ground plane similar to

that shown. A sufficient number of via holes should

be used to connect the top and bottom ground

planes. The evaluation board should be mounted

to an appropriate heat sink. The evaluation circuit

board shown is available from Analog Devices

upon request.

Item

Description

J1 - J2

SRI K Connector

J3 - J4

2 mm Molex Header

C1 - C3

100 pF Capacitor, 0402 Pkg.

C4 - C6

1000 pF Capacitor, 0603 Pkg.

C7 - C8

4.7 µF Capacitor, Tantalum

U1

HMC463LP5(E) Amplifier

109949 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350 or Arlon 25FR