CS5345

34

6.10.2 Overflow (Bit 1)

Function:

Indicates the occurrence of an ADC overflow condition.

6.10.3 Underflow (Bit 0)

Function:

Indicates the occurrence of an ADC underflow condition.

6.11 Interrupt Mask - Address 0Eh

Function:

The bits of this register serve as a mask for the Status sources found in the register “Interrupt Status

- Address 0Dh” on page 33. If a mask bit is set to 1, the error is unmasked, meaning that its occur-

rence will affect the INT pin and the status register. If a mask bit is set to 0, the error is masked, mean-

ing that its occurrence will not affect the INT pin or the status register. The bit positions align with the

corresponding bits in the Status register.

6.12 Interrupt Mode MSB - Address 0Fh

6.13 Interrupt Mode LSB - Address 10h

Function:

The two Interrupt Mode registers form a 2-bit code for each Interrupt Status register function. There

are three ways to set the INT pin active in accordance with the interrupt condition. In the Rising edge

active mode, the INT pin becomes active on the arrival of the interrupt condition. In the Falling edge

active mode, the INT pin becomes active on the removal of the interrupt condition. In Level active

mode, the INT pin remains active during the interrupt condition.

00 - Rising edge active

01 - Falling edge active

10 - Level active

11 - Reserved

76543

210

Reserved

Reserved

Reserved

Reserved

ClkErrM

Reserved

OvflM

UndrflM

76543

210

Reserved

Reserved

Reserved

Reserved

ClkErr1

Reserved

Ovfl1

Undrfl1

Reserved

Reserved

Reserved

Reserved

ClkErr0

Reserved

Ovfl0

Undrfl0