Rev B

WMEM1005 SERIES

6 Watts

AC/DC Medical Wall Mount Power Supply

Single Outputs

2/16/2018

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •

Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 2 of 4

SPECIFICATIONS

All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.

We reserve the right to change specifications based on technological advances.

SPECIFICATION

TEST CONDITIONS

Min

Typ

Max

Unit

INPUT SPECIFICATIONS

Input Voltage Range

100

240

VAC

Input Frequency

50

60

Hz

Input Current

0.3

≤0.6

A

Inrush Current

≤60

A

OUTPUT SPECIFICATIONS

Output Voltage

See Table

Line Regulation

±1

%

±5

%

Output Power

See Table

Output Current

See Table

Minimum Load

0

A

See Table

Hold-Up Time

≥8.3

mS

Temperature Coefficient

≤3

S

PROTECTION

Short Circuit Protection

Automatic Recovery

Over Current Protection

Automatic Recovery

Over Voltage Protection

Automatic Recovery

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature

0

40

ºC

Storage Temperature

-20

85

ºC

Operating Humidity

10

90

%

Storage Humidity

5

95

%

MTBF

100,000

Hours

GENERAL SPECIFICATIONS

Efficiency

Meets CEC Level VI (DoE)

PHYSICAL SPECIFICATIONS

Weight

2.47oz (70g)

Dimensions (L x W x H)

Horizontal Case

USB Output

2.19in x 1.46in x 1.07in

(55.6mm x 37.15mm x 27.1mm)

Strain Relief

2.17in x 1.42in x 0.98in

(55mm x 36.15mm x 25mm)

Vertical Case

USA, EU Plug

1.61in x 1.16in x 2.10in

(41mm x 29.4mm x 53.46mm)

UK Plug

1.61in x 1.37in x 2.10in

(41mm x 34.77mm x 53.46mm)

SAFETY CHARACTERISTICS

Safety Approvals

UL/cUL, UL60601, CB 60601, CE, FCC

NOTES

1.

“X” in model number indicates either a USB or Strain Relief output type. “X” is “U” for USB or “S” for Strain Relief.

2.

Please note, only US and EU plugs are available for the horizontal case type.

3.

Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor & parallel

with 47uF aluminum capacitor at full load and nominal line.

4.

Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.

*Due to advances in technology, specifications subject to change without notice.