| 전자부품 데이터시트 검색엔진 |
|
MP28164GD 데이터시트(PDF) 3 Page - Monolithic Power Systems |
|
|
|||||||||||||||||||||||||||||
MP28164GD 데이터시트(HTML) 3 Page - Monolithic Power Systems |
|
3 / 20 page ![]() MP28164 – SINGLE-INDUCTOR, BUCK-BOOST CONVERTER WITH 4.2A SWITCHES MP28164 Rev. 1.0 www.MonolithicPower.com 3 3/28/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. ABSOLUTE MAXIMUM RATINGS (1) VIN to GND.......................................-0.3V to 6V SW1/2 to GND .................. -0.3V (-2V for <10ns) to 6.5V (8.5V for <10ns) All other pins .....................................-0.3V to 6V Junction temperature ................................150°C Lead temperature .....................................260°C Continuous power dissipation (TA = +25°C) (2) QFN-11 (2mmx3mm)............................... 1.78W Storage temperature................ -65 C to +150C Recommended Operating Conditions (3) Startup supply voltage (VST)............1.8V to 5.5V Operation voltage (VIN) ...............1.2V (4) to 5.5V Output voltage (VOUT).........................1.5V to 5V Operating junction. temp. (TJ)...-40°C to +125°C Thermal Resistance (5) θJA θJC QFN-11 (2mmx3mm) ….…..70.......15.......°C/W NOTES: 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-to- ambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation produces an excessive die temperature, causing the regulator to go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) The device is not guaranteed to function outside of its operating conditions. 4) If VCC is powered from a source higher than 1.8V (such as VOUT), the MP28164 can work down to VIN = 1.2V, but the load capability is lower when VIN = 1.2V because of the high RDS(ON) of SWA and low current limit. 5) Measured on JESD51-7, 4-layer PCB. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |